South African Class 18E, Series 2

The Transnet Freight Rail Class 18E, Series 2 of 2009 is a South African electric locomotive.

South African Class 18E, Series 2
18-670 at Beaufort West, 27 March 2013
Type and origin
Power typeElectric
DesignerUnion Carriage & Wagon
BuilderTransnet Rail Engineering
ModelSpoornet 18E
Build date2009-2015
Total produced279
Specifications
Configuration:
​
 • AARB-B
 • UICBo'Bo'
 • CommonwealthBo-Bo
Gauge3 ft 6 in (1,067 mm) Cape gauge
Wheel diameter1,220 mm (48.0 in)
Wheelbase11,279 mm (37 ft 0.1 in)
 • Bogie3,430 mm (11 ft 3.0 in)
Pivot centres7,849 mm (25 ft 9.0 in)
Panto shoes6,972 mm (22 ft 10.5 in)
Length:
​
 • Over couplers15,494 mm (50 ft 10.0 in)
 • Body14,631 mm (48 ft 0 in)
Width2,896 mm (9 ft 6.0 in)
Height:
​
 • Pantograph4,089 mm (13 ft 5.0 in)
 • Body height3,937 mm (12 ft 11.0 in)
Loco weight88,904 kg (196,000 lb) max
Electric system/s3 kV DC catenary
Current pickup(s)Pantographs
Traction motorsFour AEI-283AY
Gear ratio18:67
Loco brakeAir & Rheostatic
Train brakesAir & Vacuum
CouplersAAR knuckle
Career
OperatorsTransnet Freight Rail
Passenger Rail Agency of South Africa
ClassClass 18E
Number in class279
Numbers18-421 to 18-435, 18-600 to 18-863
Delivered2009-2015
First run2009

In 2000, Spoornet embarked on a program to rebuild Class 6E1, Series 6 to 11 locomotives to Class 18E, Series 1 locomotives. Most of the Class 6E1s which had previously been reclassified or modified to Class 16E or Class 17E respectively were rebuilt to Class 18E as well. Rebuilding to Series 1 locomotives ceased in 2009, with 446 units rebuilt.[1]

Commencing in late 2009, all further rebuilt Class 6E1 locomotives for Transnet Freight Rail and the Passenger Rail Agency of South Africa were designated Class 18E, Series 2. These were rebuilt from Class 6E1, Series 2 to 8 locomotives and from one Class 18E, Series 1.[1]

Manufacturer

The 3 kV DC Class 6E1 electric locomotive was built for the South African Railways (SAR) by Union Carriage & Wagon (UCW) in Nigel, Transvaal, with the electrical equipment supplied by the General Electric Company (GEC). Eleven series of Class 6E1 were delivered between 1969 and 1984, with altogether 960 units built.[2]

Rebuilding

Rebuilding to Class 18E, Series 1 locomotives ceased in 2009 with 446 units rebuilt, the last Series 1 locomotive being no. 18-525. The rebuilding to Class 18E, Series 2 locomotives commenced in late 2009 and was done by Transnet Rail Engineering (TRE), now Transnet Engineering (TE), at its Koedoespoort shops in Pretoria. For Transnet Freight Rail locomotives, the Series 2 number range begins with no. 18-600.[1][3]

In 2012 and 2013, fifteen Series 2 locomotives were also rebuilt for the Passenger Rail Agency of South Africa (PRASA). These were numbered in the range from 18-421 to 18-435 and were delivered in a new light blue and charcoal livery designed by Peter Stow.[1][3]

By the time the rebuilding to Class 18E, Series 1 ceased, all available Class 6E1, Series 9 to 11, nearly all Series 8 and several Series 6 and 7 locomotives had been rebuilt. Most of the Class 18E, Series 2 locomotives were therefore rebuilt from Class 6E1, Series 2 to 7 locomotives and two Series 8 locomotives.[1]

Batteries

Beginning in 2009, before rebuilding to Series 2 commenced and in an attempt to reduce theft, the 110 V battery bank was relocated from the locomotive sides below the frame and between the bogies to cab 1, where the toilet occupies less than half of the available space. On the Series 1 locomotives, this appears to have been done only with numbers 18-510 and later. Identifying features are a small grille to the left of the cab 1 side door and, in most cases, the remaining battery box frames without side covers.[1]

Appearance

Identifying features

The most obvious visual feature to distinguish the Class 18E from the Class 6E1, is the filled in driver’s windows at the rear end where the toilet is installed. The remaining rear windscreen still has the slanted upper edge of the Class 6E1 windscreens, but the new front windscreens on the Class 18E are rectangular.[4]

On the sides, obvious visual distinctions from the Class 6E1 are the left one of the two large grilles, which was removed and the opening filled in, two new large grilles which are installed in the centre lower sides to serve as air intakes for the rheostatic braking resistance blowers, and a large access door to one of the high-tension compartments, which was installed in place of the rightmost small window which was in the upper sides of the Class 6E1, to the rear of the driver's window. On the left side, the air intakes for the air conditioner in the cab are installed between the top three steps of the roof access ladder.[4]

Locomotives rebuilt from Class 6E1, Series 2 to 7, have part of the compressed air piping sunk into a recess which runs along the left half of the lower edge of the body on the locomotive’s right side, the side opposite the roof access ladder side. This pipe was not rerouted on locomotives rebuilt from Class 6E1, Series 8.

Lineage identification

All features which distinguished Class 6E1, Series 8 or older locomotives from each other are still present on the Class 18E rebuilds, in many instances making it possible to visually determine the Class 6E1 origin of a Class 18E locomotive. Examples are shown in the pictures below. Some of these spotting features are:[5]

  • The side doors with:
    • mid-door mounted door handles on ex Series 2 to early Series 7 locomotives; and
    • low mounted handles with a mid-door drawer pull type handle at mid-door level on ex late Series 7 and Series 8 locomotives.
  • On ex Series 8 locomotives, the large hatch door on each side, below the second small window to the right of the side door on the roof access ladder side, and below the first window immediately to the right of the side door on the opposite side.
No. 18-677, ex Series 3 no. E1322, with narrow stirrup step
  • On ex Series 6 and 7 locomotives, the smooth sides without hatch doors and the rainwater beading above the small grilles on the sides, just to the right of the side doors. On some ex Series 6 or later locomotives which have been observed, however, this beading is absent, possibly because it had been removed for some reason.
  • On locomotives rebuilt from series 2 to 7, the recessed pipe on the right side.
  • On ex Series 2 to 5 locomotives, the absence of the rainwater beading above the small grilles on the sides just to the right of the side doors.
  • On locomotives rebuilt from Series 2, and series 3 in the number range from E1296 to E1345, the narrower stirrup middle step below the side doors.

Project termination

The rebuilding project was abruptly terminated in January 2015, with 31 locomotives still on the Class 18E rebuilding line at Koedoespoort, possibly to vacate the assembly line for the construction of the new Classes 21E and 22E locomotives. Of these uncompleted locomotives, three were dispatched to Transwerk's Durban shops for their rebuilding to be completed, while those Class 6E1s which were still on the stripping, shell rewiring and equipment installation production lines were to be removed and scrapped. The last Class 18E to be completed at Koedoespoort was no. 18-863.[1]

Table of rebuilds

With one exception, all the Class 18E, Series 2 locomotives were rebuilt from Class 6E1, Series 2 to 8 locomotives. No. 18-862 was rebuilt from the scrapped Class 18E, Series 1 no. 18-040, which had originally been rebuilt from Class 6E1, Series 10 no. E2131 in 2002.[6]

Class 18E, Series 1 no. 18-040

Since TFR, PRASA and TE are separate corporate entities, serviceable Class 6E1 locomotives for rebuilding are sold to TE and rebuilt Class 18E locomotives are then sold back to TFR or PRASA. Profit-wise, it is to TE's benefit to also use the shells of wrecked or burnt locomotives to rebuild, depending on the condition of the shell. Since 2003, when Series 1 numbers 18-066 and 18-075 were built from burnt Class 6E1 shells, several locomotives had therefore been rebuilt from wrecked or burnt and scrapped shells.[1]

No. 18-040 had been left parked on a siding in the veld. When a crew went back to start it, they found virtually an empty shell, completely stripped by metal thieves. Since TFR considered the locomotive not economically repairable, it was scrapped. The shell, with the bogies, was bought by TE since it was already modified to the Class 18E specifications, and was used to build no. 18-862. Since it had been scrapped, the 18-040 number could not be used again.[6]

The table shows the original Class 6E1 number, series and year built for each Class 18E, Series 2 locomotive, as well as the year it was rebuilt to Class 18E. All the table columns are sortable.[1][3]

Illustration

The Class 6E1 series lineage identification features are illustrated in the following pictures. Note the external compressed air pipe on the right side of locomotives rebuilt from Class 6E1, Series 2 to 7.

Rebuilt from Class 6E1, Series 2
  • No. 18-751 (E1268) at Capital Park, Pretoria, 26 December 2015
Rebuilt from Class 6E1, Series 3
  • No. 18-706 (E1331) at Beaufort West, Western Cape, 10 October 2015
  • No. 18-432 (E1434) in PRASA blue livery at Sentrarand, 28 September 2015
Rebuilt from Class 6E1, Series 4
  • No. 18-425 (E1460) in PRASA blue livery at Sentrarand, 28 September 2015
  • No. 18-843 (E1513) at Warrenton, Northern Cape, 19 September 2015
Rebuilt from Class 6E1, Series 5
  • No. 18-668 (E1561) at Pyramid South, Gauteng, 7 May 2013
  • No. 18-725 (E1546) at Sentrarand, Gauteng, 28 September 2015
Rebuilt from Class 6E1, Series 6
  • No. 18-617 (E1739) at Koedoespoort, Pretoria, 9 October 2009
  • No. 18-690 (E1733) at Beaconsfield, Kimberley, 17 September 2015
  • No. 18-611 (E1677) at Warrenton, Northern Cape, 21 May 2013
Rebuilt from Class 6E1, Series 7
  • No. 18-613 (E1820) at Koedoespoort, Pretoria, 2 October 2009
  • No. 18-609 (E1882) at Warrenton, Northern Cape, 8 October 2015
  • No. 18-649 (E1812) at Capital Park, Pretoria, 26 September 2015
Rebuilt from Class 6E1, Series 8
  • No. 18-608 (E1896) at Pyramid South, Gauteng, 14 May 2013
gollark: If you dislike it, make TSPUMUAI or something.
gollark: It approximates them to fractions.
gollark: Unlike existing indentation schemes it gracefully handles fractional indents and uses a mix of spaces and tabs to avoid debates.
gollark: (Stochastic Polynomial Unicode-Aware Multicharacter Automatic Indentation)
gollark: It can't be called excellent if it wasn't run through SPUAMAI.

References
  1. Information gathered from the rebuild files of individual locomotives at Transnet Rail Engineering's Koedoespoort shops, or obtained from John Middleton as well as several Transnet employees
  2. "UCW - Electric locomotives" (PDF). The UCW Partnership. Archived from the original (PDF) on 12 October 2007. Retrieved 30 September 2010.
  3. Middleton, John N. (2002). Railways of Southern Africa Locomotive Guide - 2002 (as amended by Combined Amendment List 4, January 2009) (2nd, Dec 2002 ed.). Herts, England: Beyer-Garratt Publications. pp. 49, 51, 57–58.
  4. 18E Locomotive (TFR leaflet used in driver training, c. 2010)
  5. South African Railways Index and Diagrams Electric and Diesel Locomotives, 610mm and 1065mm Gauges, Ref LXD 14/1/100/20, 28 January 1975, as amended
  6. Suid-Afrikaaanse Spoorweë / SA Railways / Ulolwe, comment by Philmar du Plessis on 29 May 2015 at 19:01

Media related to South African Class 18E Series 2 at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.