Methyl acetate

Methyl acetate, also known as MeOAc, acetic acid methyl ester or methyl ethanoate, is a carboxylate ester with the formula CH3COOCH3. It is a flammable liquid with a characteristically pleasant smell reminiscent of some glues and nail polish removers. Methyl acetate is occasionally used as a solvent, being weakly polar and lipophilic, but its close relative ethyl acetate is a more common solvent being less toxic and less soluble in water. Methyl acetate has a solubility of 25% in water at room temperature. At elevated temperature its solubility in water is much higher. Methyl acetate is not stable in the presence of strong aqueous bases or aqueous acids. Methyl acetate is not considered as a VOC in the USA.[4][5]

Not to be confused with Menthyl acetate.
Methyl acetate[1]
Names
Preferred IUPAC name
Methyl acetate
Systematic IUPAC name
Methyl ethanoate
Other names
Methyl ester of acetic acid
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.001.078
KEGG
UNII
Properties
C3H6O2
Molar mass 74.079 g·mol−1
Appearance Colorless liquid
Odor Fragrant, fruity[2]
Density 0.932 g cm−3
Melting point −98 °C (−144 °F; 175 K)
Boiling point 56.9 °C (134.4 °F; 330.0 K)
~25% (20 °C)
Vapor pressure 173 mmHg (20°C)[2]
-42.60·10−6 cm3/mol
1.361
Hazards
Safety data sheet External MSDS
NFPA 704 (fire diamond)
Flammability code 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineHealth code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformReactivity (yellow): no hazard codeSpecial hazards (white): no code
3
2
Flash point −10 °C; 14 °F; 263 K [2]
Explosive limits 3.1%-16%[2]
Lethal dose or concentration (LD, LC):
3700 mg/kg (oral, rabbit)[3]
11,039 ppm (mouse, 4 hr)
21,753 ppm (cat, 1 hr)
32,000 ppm (rat, 4 hr)[3]
NIOSH (US health exposure limits):
PEL (Permissible)
 TWA 200 ppm (610 mg/m3)[2]
REL (Recommended)
 TWA 200 ppm (610 mg/m3) ST 250 ppm (760 mg/m3)[2]
IDLH (Immediate danger)
 3100 ppm[2]
Related compounds
Related esters
 Methyl formate
Ethyl acetate
Ethyl formate
Methyl fluoroacetate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Preparation and reactions

Methyl acetate is produced industrially via the carbonylation of methanol as a byproduct of the production of acetic acid.[6] Methyl acetate also arises by esterification of acetic acid with methanol in the presence of strong acids such as sulfuric acid; this production process is famous because of Eastman Kodak's intensified process using a reactive distillation.

Reactions

In the presence of strong bases such as sodium hydroxide or strong acids such as hydrochloric acid or sulfuric acid it is hydrolyzed back into methanol and acetic acid, especially at elevated temperature. The conversion of methyl acetate back into its components, by an acid, is a first-order reaction with respect to the ester. The reaction of methyl acetate and a base, for example sodium hydroxide, is a second-order reaction with respect to both reactants.

Applications

A major use of methyl acetate is as a volatile low toxicity solvent in glues, paints, and nail polish removers.

Acetic anhydride is produced by carbonylation of methyl acetate in a process that was inspired by the Monsanto acetic acid synthesis.[7]

gollark: ++deploy <@398575402865393665>oforms
gollark: +>hack into apiosystem
gollark: +>eval "eval"
gollark: β
gollark: +>eval 4

See also

References
  1. Merck Index, 12th Edition, 6089.
  2. NIOSH Pocket Guide to Chemical Hazards. "#0391". National Institute for Occupational Safety and Health (NIOSH).
  3. "Methyl acetate". Immediately Dangerous to Life and Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  4. Zeno, W. Wicks, JR, Frank N. Jones, S. Peter Pappas, and Douglas A. Wicks (2007). Organic Coatings. Hoboken, New Jersey: Wiley. ISBN 978-0-471-69806-7.CS1 maint: multiple names: authors list (link)
  5. "Update: U.S. EPA Exempt Volatile Organic Compounds". American Coatings Association. 2018-01-30. Retrieved 2019-03-20.
  6. Hosea Cheung, Robin S. Tanke, G. Paul Torrence “Acetic Acid” in Ullmann's Encyclopedia of Industrial Chemistry, 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a01_045
  7. Zoeller, J. R.; Agreda, V. H.; Cook, S. L.; Lafferty, N. L.; Polichnowski, S. W.; Pond, D. M. (1992). "Eastman Chemical Company Acetic Anhydride Process". Catalysis Today. 13: 73–91. doi:10.1016/0920-5861(92)80188-S.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.