Thurra River

The Thurra River is a perennial river with no defined major catchment, located in the East Gippsland region of the Australian state of Victoria.

Thurra
Thurra River from the Croajingolong sand dunes
Mouth of the Thurra River, in Victoria.
Location
CountryAustralia
StateVictoria
RegionSouth East Corner (IBRA), East Gippsland
Local government areaShire of East Gippsland
Physical characteristics
SourceMealing Hill
  elevation311 m (1,020 ft)
MouthBass Strait
  location
near Point Hicks
  coordinates
37°46′56″S 149°18′39″E
  elevation
0 m (0 ft)
Length71 km (44 mi)
Basin features
National parksAlfred NP, Croajingolong NP
[1][2]

Course and features

The Thurra River rises below Mealing Hill in remote country northeast of Cann River and flows generally south through the western edge of the Alfred National Park and through the Croajingolong National Park, before reaching its mouth with Bass Strait, east northeast of Point Hicks in the Shire of East Gippsland. The river descends 311 metres (1,020 ft) over its 71 kilometres (44 mi) course.[2]

The river is traversed by the Princes Highway east of Cann River.[2]

There are Parks Victoria campsites near the Thurra River mouth.[3]

gollark: On your actual computer: Download the Windows ZIP from the releases page, open command prompt in the same folder, then run the kristforge EXE or whatever with the address as the argument.
gollark: `/deposit --mining` is to be run ingame.
gollark: Really? You might have to use the `/deposit --mining` address then, yes.
gollark: `./kristforge the_shadow_yt@switchcraft.kst` or something.
gollark: With most krist miners.

See also

References

  1. "Thurra River: 27766". Vicnames. Government of Victoria. 2 May 1966. Retrieved 9 January 2014.
  2. "Map of Thurra River, VIC". Bonzle Digital Atlas of Australia. Retrieved 9 January 2014.
  3. "Camping at Thurra River". Retrieved 18 December 2014.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.