Roman technology

Roman technology is the collection of techniques, skills, methods, processes, and engineering practices utilized and developed by the civilization of ancient Rome (753 BC – 476 AD).The Roman Empire was a technologically advanced civilization of antiquity. The Romans incorporated technologies from the Greeks, Etruscans, and Celts. The technology developed by a civilization is limited by the available sources of energy, and the Romans were no different in this sense. Accessible sources of energy determine the ways in which power is generated. The main types of power accessed by the ancient Romans were human, animal, and water.

Artistic rendition of the Pantheon

With these limited sources of power, the Romans managed to build impressive structures, some of which survive to this day. The durability of Roman structures, such as roads, dams, and buildings, is accounted for the building techniques and practices they utilized in their construction projects. Rome and her surrounding area contained various types of volcanic materials, which Romans experimented with the creation of building materials, particularly cements and mortars. [1] Along with concrete, the Romans used stone, wood, and marble as building materials. They used these materials to construct civil engineering projects for their cities and transportation devices for land and sea travel.

The Romans also contributed to the development of technologies of the battlefield. Warfare was an essential aspect of Roman society and culture. The military was not only used for territorial acquisition and defense, but also as a tool for civilian administrators to use to help staff provincial governments and assist in construction projects.[2] The Romans adopted, improved, and developed military technologies for foot soldiers, cavalry, and siege weapons for land and sea environments.

Having familiar relations with warfare, the Romans became accustomed to physical injuries. To combat physical injuries sustained in civilian and military spheres, the Romans innovated medical technologies, particularly surgical practices and techniques. 

Types of power

Human power

The most readily available sources of power to the ancients were human power and animal power. An obvious utilization of human power is the movement of objects. For objects ranging from 20 to 80 pounds a single person can generally suffice. For objects of greater weight, more than one person may be required to move the object. A limiting factor in using multiple people to move objects is the available amount of grip space. To overcome this limiting factor, mechanical devices were developed to assist in the manipulation of objects. One device being the windlass which used ropes and pulleys to manipulate objects. The device was powered by multiple people pushing or pulling on handspikes attached to a cylinder.

Human power was also a factor in the movement of ships, in particularly warships. Though wind-powered sails were the dominate form of power in water transportation, rowing was often used by military craft during battle engagements.[3]

Animal power

The primary usage of animal power was for transportation. Several species of animals were used for differing tasks. Oxen are strong creatures that do not require the finest pasture. Being strong and cheap to maintain, oxen were used to farm and transport large masses of good. A disadvantage to using oxen is that they are slow. If speed was desired, horses were called upon. The main environment which called for speed was the battlefield, with horses being used in the cavalry and scouting parties. For carriages carrying passengers or light materials, donkeys or mules were generally used, as they were faster than oxen and cheaper on fodder than horses. Other than being used as a means of transportation, animals were also employed in the operation of rotary mills.

Schematic of an Overshot water wheel

Beyond the confines of the land, a schematic for a ship propelled by animals has been discovered. The work known as Anonymus De Rebus Bellicus describes a ship powered by oxen. Wherein oxen are attached to a rotary, moving in a circle on a deck floor, spinning two paddle wheels, one on either side of the ship. The likelihood that such a ship was ever built is low, due to the impracticality of controlling animals on a watercraft.[3]

Water power

Power from water was generated through the use of a water wheel. A water wheel had two general designs: the undershot and the overshot. The undershot water wheel generated power from the natural flow of a running water source pushing upon the wheel’s submerged paddles. The overshot water wheel generated power by having water flow over its buckets from above. This was usually achieved by building an aqueduct above the wheel. Although it is possible to make the overshot water wheel 70 percent more efficient than the undershot, the undershot was generally the preferred water wheel. The reason being, the economic cost to building an aqueduct was too high for the mild benefit of having the water wheel turn faster. The primary purpose of water wheels were to generate power for milling operations and to raise water above a system’s natural height. Evidence also exists that water wheels were used to power the operation of saws, though only scant descriptions of such devices remain.[3]

Reconstruction of Hero of Alexandria's steam machine the Aeolipile, 1st century CE

Wind power

Wind power was used in the operation of watercraft, through the use of sails. Windmills do not appear to have been created in Ancient times.[3]

Solar power

The Romans used the Sun as a heat source for buildings, such as bath houses. Thermae were built with large windows facing southwest, the location of the Sun at the hottest time of day.[4]

Theoretical types of power

Steam power

The generation of power through steam remained theoretical in the Roman world. Hero of Alexandria published schematics of a steam device that rotated a ball on a pivot. The device used heat from a cauldron to push steam through a system of tubes towards the ball. The device produced roughly 1500 rpm but would never be practical on an industrial scale as the labour requirements to operate, fuel and maintain the heat of the device would have been too great of a cost.[3] 

Technology as a craft

Roman technology was largely based on a system of crafts. Technical skills and knowledge were contained within the particular trade, such as stonemasons. In this sense, knowledge was generally passed down from a tradesman master to a tradesman apprentice. Since there are only a few sources from which to draw upon for technical information, it is theorized that tradesmen kept their knowledge a secret. Vitruvius, Pliny the Elder and Frontinus are among the few writers who have published technical information about Roman technology.[4] There was a corpus of manuals on basic mathematics and science such as the many books by Archimedes, Ctesibius, Heron (a.k.a. Hero of Alexandria), Euclid and so on. Not all of the manuals which were available to the Romans have survived, as lost works illustrate.

Engineering and construction

Further information: Roman architecture and Roman engineering

Building materials and instruments

Reconstruction of a 10.4-metre-high Roman construction crane at Bonn, Germany

Wood

The Romans created fireproof wood by coating the wood with alum.[5]

Stone

It was ideal to mine stones from quarries that were situated as close to the site of construction as possible, to reduce the cost of transportation. Stone blocks were formed in quarries by punching holes in lines at the desired lengths and widths. Then, wooden wedges were hammered into the holes. The holes were then filled with water so that the wedges would swell with enough force to cut the stone block out of the Earth. Blocks with the dimensions of 23yds by 14ft by 15ft have been found, with weights of about 1000 tons. There is evidence that saws were developed to cut stone in the Imperial age. Initially, Romans used saws powered by hand to cut stone, but later went on to develop stone cutting saws powered by water.[5]

Cements

The ratio of the mixture of Roman lime mortars depended upon where the sand for the mixture was acquired. For sand gathered at a river or sea, the mixture ratio was two parts sand, one part lime, and one part powdered shells. For sand gathered further inland, the mixture was three parts sand and one part lime. The lime for mortars was prepared in limekilns, which were underground pits designed to block out the wind.[5]

Another type of Roman mortar is known as pozzolana mortar. Pozzolana is a volcanic clay substance located in and around Naples. The mixture ratio for the cement was two parts pozzolana and one part lime mortar. Due to its composition, pozzolana cement was able to form in water and has been found to be as hard as natural forming rock.[5]

Cranes

Cranes were used for construction work and possibly to load and unload ships at their ports, although for the latter use there is according to the “present state of knowledge” still no evidence.[6] Most cranes were capable of lifting about 6–7 tons of cargo, and according to a relief shown on Trajan's column were worked by treadwheel.

Buildings

The Pantheon constructed 113 - 125 CE

The Pantheon

The Romans designed the Pantheon thinking about the concepts of beauty, symmetry, and perfection. The Romans incorporated these mathematical concepts into their public works projects. For instance, the concept of perfect numbers were used in the design of the Pantheon by embedding 28 coffers into the dome. A perfect number is a number where its factors add up to itself. So, the number 28 is considered to be a perfect number, because its factors of 1, 2, 4, 7, and 14 add together to equal 28. Perfect numbers are extremely rare, with there being only one number for each quantity of digits (one for single digits, double digits, triple digits, quadruple digits, etc.). Embodying mathematical concepts of beauty, symmetry, and perfection, into the structure conveys the technical sophistication of Roman engineers. [7]

Cements were essential to the design of the Pantheon. The mortar used in the construction of the dome is made up of a mixture of lime and the volcanic powder known as, pozzolana. The concrete is suited for the use in constructing thick walls as it does not require to be completely dry in order to cure.[8]

The construction of the Pantheon was a massive undertaking, requiring large quantities of resources and man-hours. Delaine estimates the amount of total manpower needed in the construction the Pantheon to be about 400 000 man-days.[9]  

Hagia Sophia constructed 537 CE

Hagia Sophia

Further information: Hagia Sophia

Although the Hagia Sophia was constructed after the fall of the Western empire, its construction incorporated the building materials and techniques signature to ancient Rome. The building was constructed using pozzolana mortar. Evidence for the use of the substance comes from the sagging of the structures arches during construction, as a distinguishing feature of pozzalana mortar is the large amount of time it needs to cure. The engineers had to remove decorative walls in order to let the mortar cure.[10]

The pozzalana mortar used in the construction of the Hagia Sophia does not contain volcanic ash but instead crushed brick dust. The composition of the materials used in pozzalana mortar leads to an increased tensile strength. A mortar composed of mostly lime has a tensile strength of roughly 30 psi whereas pozzalana mortar using crushed brick dust has a tensile strength of 500 psi. The advantage of using pozzalana mortar in the construction of the Hagia Sophia is the increase in strength of the joints. The mortar joints used in the structure are wider than one would expect in a typical brick and mortar structure. The fact of the wide mortar joints suggests the designers of the Hagia Sophia knew about the high tensile strength of the mortar and incorporated it accordingly.[10]

Waterworks

Aqueducts

Further information: Roman aqueduct and Aqueduct (bridge)

The Romans constructed numerous aqueducts to supply water. The city of Rome itself was supplied by eleven aqueducts made of limestone that provided the city with over 1 million cubic metres of water each day, sufficient for 3.5 million people even in modern-day times,[11] and with a combined length of 350 kilometres (220 mi).[12]

Roman Segovia Aqueduct in modern-day Spain, constructed 1st century CE

Water inside the aqueducts depended entirely on gravity. The raised stone channels in which the water traveled were slightly slanted. The water was carried directly from mountain springs. After it had gone through the aqueduct, the water was collected in tanks and fed through pipes to fountains, toilets, etc.[13]

The main aqueducts in Ancient Rome were the Aqua Claudia and the Aqua Marcia.[14] Most aqueducts were constructed below the surface with only small portions above ground supported by arches.[15] The longest Roman aqueduct, 178 kilometres (111 mi) in length, was traditionally assumed to be that which supplied the city of Carthage. The complex system built to supply Constantinople had its most distant supply drawn from over 120 km away along a sinuous route of more than 336 km.[16]

Roman aqueducts were built to remarkably fine tolerances, and to a technological standard that was not to be equaled until modern times. Powered entirely by gravity, they transported very large amounts of water very efficiently. Sometimes, where depressions deeper than 50 metres had to be crossed, inverted siphons were used to force water uphill.[15] An aqueduct also supplied water for the overshot wheels at Barbegal in Roman Gaul, a complex of water mills hailed as "the greatest known concentration of mechanical power in the ancient world".[17]

Roman aqueducts conjure images of water travelling long distances across arched bridges, however; only 5 percent of the water being transported along the aqueduct systems traveled by way of bridges. Roman engineers worked to make the routes of aqueducts as practical as possible. In practice, this meant designing aqueducts that flowed ground level or below surface level, as these were more cost effective than building bridges considering the cost of construction and maintenance for bridges was higher than that of surface and sub-surface elevations. Aqueduct bridges were often in need of repairs and spent years at a time in disuse. Water theft from the aqueducts was a frequent problem which led to difficulties in estimating the amount of water flowing through the channels.[18] To prevent the channels of the aqueducts from eroding, a plaster known as opus signinum was used.[19] The plaster incorporated crushed terracotta in the typical Roman mortar mixture of pozzolana rock and lime.[20]

Proserpina Dam was constructed during the first to second century CE and is still in use today.

Dams

Main article: List of Roman dams and reservoirs

The Romans built dams for water collection, such as the Subiaco Dams, two of which fed Anio Novus, one of the largest aqueducts of Rome. They built 72 dams in just one country, Spain and many more are known across the Empire, some of which are still in use. At one site, Montefurado in Galicia, they appear to have built a dam across the river Sil to expose alluvial gold deposits in the bed of the river. The site is near the spectacular Roman gold mine of Las Medulas. Several earthen dams are known from Britain, including a well-preserved example from Roman Lanchester, Longovicium, where it may have been used in industrial-scale smithing or smelting, judging by the piles of slag found at this site in northern England. Tanks for holding water are also common along aqueduct systems, and numerous examples are known from just one site, the gold mines at Dolaucothi in west Wales. Masonry dams were common in North Africa for providing a reliable water supply from the wadis behind many settlements.

The Romans built dams to store water for irrigation. They understood that spillways were necessary to prevent the erosion of earth-packed banks. In Egypt, the Romans adopted the water technology known as wadi irrigation from the Nabataeans. Wadis were a technique developed to capture large amounts of water produced during the seasonal floods and store it for the growing season. The Romans successfully developed the technique further for a larger scale.[18]

Sanitation

Roman baths in the English city of Bath. A temple was initially constructed on the site in 60 CE with the bathing complex being built up over time.

The Romans did not invent plumbing or toilets, but instead borrowed their waste disposal system from their neighbors, particularly the Minoans.[21] A waste disposal system was not a new invention, but rather had been around since 3100 BCE, when one was created in the Indus River Valley [22] The Roman public baths, or thermae served hygienic, social and cultural functions. The baths contained three main facilities for bathing. After undressing in the apodyterium or changing room, Romans would proceed to the tepidarium or warm room. In the moderate dry heat of the tepidarium, some performed warm-up exercises and stretched while others oiled themselves or had slaves oil them. The tepidarium’s main purpose was to promote sweating to prepare for the next room, the caldarium or hot room. The caldarium, unlike the tepidarium, was extremely humid and hot. Temperatures in the caldarium could reach 40 degrees Celsius (104 degrees Fahrenheit). Many contained steam baths and a cold-water fountain known as the labrum. The last room was the frigidarium or cold room, which offered a cold bath for cooling off after the caldarium. The Romans also had flush toilets.

Roman baths

Further information: Thermae

The containment of heat in the rooms was important in the operation of the baths, as to avoid patrons from catching colds. To prevent doors from being left open, the door posts were installed at an inclined angle so that the doors would automatically swing shut. Another technique of heat efficiency was the use of wooden benches over stone, as wood conducts away less heat.[23]

Transportation

The Via Appia constructed 312–264 BCE

Roads

The Romans primarily built roads for their military. Their economic importance was probably also significant, although wagon traffic was often banned from the roads to preserve their military value. In total, more than 400,000 kilometres (250,000 mi) of roads were constructed, 80,500 kilometres (50,000 mi) of which were stone-paved.[24]

Way stations providing refreshments were maintained by the government at regular intervals along the roads. A separate system of changing stations for official and private couriers was also maintained. This allowed a dispatch to travel a maximum of 800 kilometres (500 mi) in 24 hours by using a relay of horses.

The roads were constructed by digging a pit along the length of the intended course, often to bedrock. The pit was first filled with rocks, gravel or sand and then a layer of concrete. Finally, they were paved with polygonal rock slabs. Roman roads are considered the most advanced roads built until the early 19th century. Bridges were constructed over waterways. The roads were resistant to floods and other environmental hazards. After the fall of the Roman Empire the roads were still usable and used for more than 1000 years.

Most Roman cities were shaped like a square. There were 4 main roads leading to the center of the city, or forum. They formed a cross shape, and each point on the edge of the cross was a gateway into the city. Connecting to these main roads were smaller roads, the streets where people lived.

Bridges

Further information: Roman bridge and List of Roman bridges

Roman bridges were built with stone and/or concrete and utilized the arch. Built in 142 BC, the Pons Aemilius, later named Ponte Rotto (broken bridge) is the oldest Roman stone bridge in Rome, Italy. The biggest Roman bridge was Trajan's bridge over the lower Danube, constructed by Apollodorus of Damascus, which remained for over a millennium the longest bridge to have been built both in terms of overall and span length. They were most of the time at least 60 feet (18 m) above the body of water.

Carts

Alcantara Bridge constructed in 104 to 106 CE, was built in a similar in style to Trajan's Bridge.

Roman carts had many purposes and came in a variety of forms. Freight carts were used to transport goods. Barrel carts were used to transport liquids. The carts had large cylindrical barrels laid horizontally with their tops facing forward. For transporting building materials, such as sand or soil, the Romans used carts with high walls. Public transportation carts were also in use with some designed with sleeping accommodations for up to six people.[25]

The Romans developed a railed cargo system for transporting heavy loads. The rails consisted of grooves embedded into existing stone roadways. The carts used in such a system had large block axles and wooden wheels with metal casings.[25]

Carts also contained brakes, elastic suspensions and bearings. The elastic suspension systems used leather belts attached bronze supports to suspend the carriage above the axles. The system helped to create a smoother ride by reducing the vibration. The Romans adopted bearings developed by the Celts. The bearings decreased rotational friction by using mud to lubricate stone rings.[25]

Industrial

Rosia Montana Roman Gold Mine

Mining

Further information: Roman metallurgy and Roman mining

The Romans also made great use of aqueducts in their extensive mining operations across the empire, some sites such as Las Medulas in north-west Spain having at least 7 major channels entering the minehead. Other sites such as Dolaucothi in south Wales was fed by at least 5 leats, all leading to reservoirs and tanks or cisterns high above the present opencast. The water was used for hydraulic mining, where streams or waves of water are released onto the hillside, first to reveal any gold-bearing ore, and then to work the ore itself. Rock debris could be sluiced away by hushing, and the water also used to douse fires created to break down the hard rock and veins, a method known as fire-setting.

Alluvial gold deposits could be worked and the gold extracted without needing to crush the ore. Washing tables were fitted below the tanks to collect the gold-dust and any nuggets present. Vein gold needed crushing, and they probably used crushing or stamp mills worked by water-wheels to comminute the hard ore before washing. Large quantities of water were also needed in deep mining to remove waste debris and power primitive machines, as well as for washing the crushed ore. Pliny the Elder provides a detailed description of gold mining in book xxxiii of his Naturalis Historia, most of which has been confirmed by archaeology. That they used water mills on a large scale elsewhere is attested by the flour mills at Barbegal in southern France, and on the Janiculum in Rome.

Military Technology

Further information: Technological history of the Roman military and Roman military engineering

The Roman military technology ranged from personal equipment and armament to deadly siege engines.

Foot Soldier

Weaponry

Pilum (spear): The Roman heavy spear was a weapon favored by legionaries and weighed approximately five pounds.[26] The innovated javelin was designed to be used only once and was destroyed upon initial use. This ability prevented the enemy from reusing spears. All soldiers carried two versions of this weapon: a primary spear and a backup. A solid block of wood in the middle of the weapon provided legionaries protection for their hands while carrying the device. According to Polybius, historians have records of "how the Romans threw their spears and then charged with swords".[27] This tactic seemed to be common practice among Roman infantry.

Armour

Roman Scale Armour

While heavy, intricate armour was not uncommon (cataphracts), the Romans perfected a relatively light, full torso armour made of segmented plates (lorica segmentata). This segmented armour provided good protection for vital areas, but did not cover as much of the body as lorica hamata or chainmail. The lorica segmentata provided better protection, but the plate bands were expensive and difficult to produce and difficult to repair in the field. Generally, chainmail was cheaper, easier to produce, and simpler to maintain, was one-size-fits-all, and was more comfortable to wear – thus, it remained the primary form of armour even when lorica segmentata was in use.

Tactics

Testudo is a tactical military maneuver original to Rome. The tactic was implemented by having units raise their shields in order to protect themselves from enemy projectiles raining down on them. The strategy only worked if each member of the testudo protected his comrade. Commonly used during siege battles, the “sheer discipline and synchronization required to form a Testudo” was a testament to the abilities of legionnaires.[28] Testudo, meaning tortoise in Latin, “was not the norm, but rather adopted in specific situations to deal with particular threats on the battlefield”.[28] The Greek phalanx and other Roman formations were a source of inspiration for this maneouver.

Cavalry

The Roman cavalry saddle had four horns and is believed to have been copied from Celtic peoples.

Siege warfare

Roman siege engines such as ballistas, scorpions and onagers were not unique. But the Romans were probably the first people to put ballistas on carts for better mobility on campaigns. On the battlefield, it is thought that they were used to pick off enemy leaders. There is one account of the use of artillery in battle from Tacitus, Histories III,23:

On engaging they drove back the enemy, only to be driven back themselves, for the Vitellians had concentrated their artillery on the raised road that they might have free and open ground from which to fire; their earlier shots had been scattered and had struck the trees without injuring the enemy. A ballista of enormous size belonging to the Fifteenth legion began to do great harm to the Flavians' line with the huge stones that it hurled; and it would have caused wide destruction if it had not been for the splendid bravery of two soldiers, who, taking some shields from the dead and so disguising themselves, cut the ropes and springs of the machine.[29]

In addition to innovations in land warfare, the Romans also developed the Corvus (boarding device) a movable bridge that could attach itself to an enemy ship and allow the Romans to board the enemy vessel. Developed during the First Punic War it allowed them to apply their experience in land warfare on the seas.[29]

Ballistas and onagers

Further information: Ballista

While core artillery inventions were notably founded by the Greeks, Rome saw opportunity in the ability to enhance this long range artillery. Large artillery pieces such as Carroballista and Onagers bombarded enemy lines, before full ground assault by infantry. The manuballista would "often be described as the most advanced two-armed torsion engine used by the Roman Army”.[30] The weapon often looks like a mounted crossbow capable of shooting projectiles. Similarly, the onager “named after the wild ass because of its ‘kick’," was a larger weapon that was capable of hurling large projectiles at walls or forts.[30] Both were very capable machines of war and were put to use by the Roman military.

Computer model of a helepolis

The Helepolis

Further information: helepolis

The helepolis was a transportation vehicle used to besiege cities. The vehicle had wooden walls to shield soldiers as they were transported toward the enemy’s walls. Upon reaching the walls, the soldiers would disembark at the top of the 15m tall structure and drop on to the enemy’s ramparts. To be effective in combat, the helepolis was designed to be self-propelled. The self-propelled vehicles were operated using two types of motors: an internal motor powered by humans, or a counterweight motor powered by gravity. The human-powered motor used a system of ropes that connected the axles to a capstan. It has been calculated that at least 30 men would be required to turn the capstan in order to exceed the force required to move the vehicle. Two capstans may have been used instead of just the one, reducing the amount of men needed per capstan to 16, for a total of 32 to power the helepolis. The gravity-powered counterweight motor used a system of ropes and pulleys to propel the vehicle. Ropes were wrapped around the axles, strung through a pulley system that connected them to a counterweight hanging at the top of the vehicle. The counterweights would have been made of lead or a bucket filled with water. The lead counterweight was encapsulated in a pipe filled with seeds to control its fall. The water bucket counterweight was emptied when it reached the bottom of the vehicle, raised back to the top, and filled with water using a reciprocating water pump, so that motion could again be achieved. It has been calculated that to move a helepolis with a mass of 40000kg, a counterweight with a mass of 1000kg was needed.[31]

Greek fire

Further information: Greek fire

Originally an incendiary weapon adopted from the Greeks in 7th century AD, the Greek fire “is one of the very few contrivances whose gruesome effectiveness was noted by”[32] many sources. Roman innovators made this already lethal weapon even more deadly. Its nature is often described as a “precursor to napalm".[32] Military strategists often put the weapon to good use during naval battles, and the ingredients to its construction “remained a closely guarded military secret”.[32] Despite this, the devastation caused by Greek fire in combat is indisputable.

Depiction of a Roman Pontoon Bridge on the Column of Marcus Aurelius, constructed 193 CE

Transportation

Pontoon bridge

Further information: Pontoon bridge

Mobility, for a military force, was an essential key to success. Although this was not a Roman invention, as there were instances of "ancient Chinese and Persians making use of the floating mechanism”,[33] Roman generals used the innovation to great effect in campaigns. Furthermore, engineers perfected the speed at which these bridges were constructed. Leaders surprised enemy units to great effect by speedily crossing otherwise treacherous bodies of water. Lightweight crafts were “organized and tied together with the aid of planks, nails and cables”.[33] Rafts were more commonly used instead of building new makeshift bridges, enabling quick construction and deconstruction.[34] The expedient and valuable innovation of the pontoon bridge also accredited its success to the excellent abilities of Roman Engineers.

Medical technology

Surgical instruments used by ancient Romans

Further information: Military medicine

Surgery

Although various levels of medicine were practiced in the ancient world,[35] the Romans created or pioneered many innovative surgeries and tools that are still in use today such as hemostatic tourniquets and arterial surgical clamps.[36] Rome was also responsible for producing the first battlefield surgery unit, a move that paired with their contributions to medicine made the Roman army a force to be reckoned with.[36] They also used a rudimentary version of antiseptic surgery years before its use became popular in the 19th century and possessed very capable doctors.[36]

Technologies developed or invented by the Romans

Technology	Comment
Abacus, Roman	Portable.
Alum	The production of alum (KAl(SO4)2.12H2O) from alunite (KAl3(SO4)2^.(OH)6) is archaeologically attested on the island Lesbos.[37] This site was abandoned in the 7th century but dates back at least to the 2nd century AD.
Amphitheatre	See e.g. Colosseum.
Aqueduct, true arch	Pont du Gard, Segovia etc.
Arch, monumental
Bath, monumental public (Thermae)	See e.g. Baths of Diocletian
Book (Codex)	First mentioned by Martial in the 1st century AD. Held many advantages over the scroll.
Brass	The Romans had enough understanding of zinc to produce a brass denomination coinage; see sestertius.
Bridge, true arch	See e.g. Roman bridge in Chaves or the Severan Bridge.
Bridge, segmental arch	More than a dozen Roman bridges are known to feature segmental (=flat) arches. A prominent example was Trajan's bridge over the Danube, a lesser known the extant Limyra Bridge in Lycia
Bridge, pointed arch	Constructed in the early Byzantine era, the earliest known bridge featuring a pointed arch is the 5th or 6th century AD Karamagara Bridge[38]
Camel harness	The harnessing of camels to ploughs is attested in North Africa by the 3rd century AD[39]
Cameos	Probably a Hellenistic innovation e.g. Cup of the Ptolemies but taken up by the Emperors e.g. Gemma Augustea, Gemma Claudia etc.
Cast Iron	Recently archaeologically detected in the Val Gabbia in northern Lombardy from the 5th and 6th centuries AD.[40] This technically interesting innovation appears to have had little economic impact. But archaeologists may have failed to recognize the distinctive slag, so the date and location of this innovation may be revised.
Cement Concrete	Pozzolana variety
Crank handle	A Roman iron crank handle was excavated in Augusta Raurica, Switzerland. The 82.5 cm long piece with a 15 cm long handle is of yet unknown purpose and dates to no later than c. 250 AD.[41]
Crank and connecting rod	Found in several water-powered saw mills dating from the late 3rd (Hierapolis sawmill) to 6th century AD (at Ephesus respectively Gerasa).[42]
Crane, treadwheel
Dam, Arch[43]	Currently best attested for the dam at Glanum, France dated c. 20 BC.[44] The structure has entirely disappeared. Its existence attested from the cuts into the rock on either side to key in the dam wall, which was 14.7 metres high, 3.9m thick at base narrowing to 2.96m at the top. Earliest description of arch action in such types of dam by Procopius around 560 AD, the Dara Dam[45]
Dam, Arch-gravity	Examples include curved dams at Orükaya,[46] Çavdarhisar, both Turkey (and 2nd century)[46]Kasserine Dam in Tunisia,[47] and Puy Foradado Dam in Spain (2nd–3rd century)[48]
Dam, Bridge	The Band-i-Kaisar, constructed by Roman prisoners of war in Shustar, Persia, in the 3rd century AD,[49] featured a weir combined with an arch bridge, a multifunctional hydraulic structure which subsequently spread throughout Iran.[50]
Dam, Buttress	Attested in a number of Roman dams in Spain,[48] like the 600 m long Consuegra Dam
Dam, Multiple Arch Buttress	Esparragalejo Dam, Spain (1st century AD) earliest known[51]
Dome, monumental	See e.g. Pantheon.
Flos Salis	A product of salt evaporation ponds Dunaliella salina[52] used in the perfume industry (Pliny Nat. Hist. 31,90)
Force pump used in fire engine	See image of pointable nozzle
Glass blowing	This led to a number of innovations in the use of glass. Window glass is attested at Pompeii in AD 79. In the 2nd century AD[53] hanging glass oil lamps were introduced. These used floating wicks and by reducing self-shading gave more lumens in a downwards direction. Cage cups (see photograph) are hypothesised as oil lamps.
	Dichroic glass as in the Lycurgus Cup. Note, this material attests otherwise unknown chemistry (or other way?) to generate nano-scale gold-silver particles.
	Glass mirrors (Pliny the Elder Naturalis Historia 33,130)
Greenhouse cold frames	(Pliny the Elder Naturalis Historia 19.64; Columella on Ag. 11.3.52)
Hydraulis	A water organ. Later also the pneumatic organ.
Hushing	Described by Pliny the Elder and confirmed at Dolaucothi and Las Médulas
Hydraulic mining	Described by Pliny the Elder and confirmed at Dolaucothi and Las Médulas
Hydrometer	Mentioned in a letter of Synesius
Hypocaust	A floor and also wall heating system. Described by Vitruvius
Knife, multifunctional
Lighthouses	The best surviving examples are those at Dover castle and the Tower of Hercules at A Coruña
Leather, Tanned	The preservation of skins with vegetable tannins was a pre-Roman invention but not of the antiquity once supposed. (Tawing was far more ancient.) The Romans were responsible for spreading this technology into areas where it was previously unknown such as Britain and Qasr Ibrim on the Nile. In both places this technology was lost when the Romans withdrew.[54]
Mills	M.J.T.Lewis presents good evidence that water powered vertical pounding machines came in by the middle of the 1st century AD for fulling, grain hulling (Pliny Nat. Hist. 18,97) and ore crushing (archaeological evidence at Dolaucothi Gold Mines and Spain).
	Grainmill, rotary. According to Moritz (p57) rotary grainmills were not known to the ancient Greeks but date from before 160 BC. Unlike reciprocating mills, rotary mills could be easily adapted to animal or water power. Lewis (1997) argues that the rotary grainmill dates to the 5th century BC in the western Mediterranean. Animal and water powered rotary mills came in the 3rd century BC.
	Sawmill, water powered. Recorded by 370 AD. Attested in Ausonius's poem Mosella. Translated "the Ruwer sends mill-stones swiftly round to grind the corn, And drives shrill saw-blades through smooth marble blocks". Recent archaeological evidence from Phrygia, Anatolia, now pushes back the date to the 3rd century AD and confirms the use of a crank in the sawmill.[55]
	Shipmill, (though small, the conventional term is "shipmill" not boat mill, probably because there was always a deck, and usually an enclosed superstructure, to keep the flour away from the damp) where water wheels were attached to boats, was first recorded at Rome in 547 AD in Procopius of Caesarea's Gothic Wars (1.19.8–29) when Belisaurius was besieged there.
Essentials of the Steam engine	By the late 3rd century AD, all essential elements for constructing a steam engine were known by Roman engineers: steam power (in Hero's aeolipile), the crank and connecting rod mechanism (in the Hierapolis sawmill), the cylinder and piston (in metal force pumps), non-return valves (in water pumps) and gearing (in water mills and clocks)[56]
	Watermill. Improvements upon earlier models. For the largest mill complex known see Barbegal
Mercury Gilding	as in the Horses of San Marco
Newspaper, rudimentary	See Acta Diurna.
Odometer
Paddle wheel boats	In de Rebus Bellicis (possibly only a paper invention).
Pewter	Mentioned by Pliny the Elder (Naturalis Historia 34, 160–1). Surviving examples are mainly Romano-British of the 3rd and 4th centuries e.g. and . Roman pewter had a wide range of proportions of tin but proportions of 50%, 75% and 95% predominate (Beagrie 1989).
Pleasure lake	An artificial reservoir, highly unusual in that it was meant for recreational rather than utilitarian purposes was created at Subiaco, Italy, for emperor Nero (54–68 AD). The dam remained the highest in the Roman Empire (50 m),[57] and in the world until its destruction in 1305.[58]
Plough
	iron-bladed (A much older innovation (e.g. Bible; I Samuel 13, 20–1) that became much more common in the Roman period)
	wheeled (Pliny the Elder Naturalis Historia 18. 171–3) (More important for the Middle Ages, than this era.)
Pottery, glossed	i.e. Samian ware
Reaper	An early harvesting machine: vallus (Pliny the Elder Naturalis Historia 18,296, Palladius 7.2.2–4 )
Sails, fore-and-aft rig	Introduction of fore-and-aft rigs 1) the Lateen sail 2) the Spritsail, this last already attested in 2nd century BC in the northern Aegean Sea[59] Note: there is no evidence of any combination of fore-and-aft rigs with square sails on the same Roman ship.
Sails, Lateen	Representations show lateen sails in the Mediterranean as early as the 2nd century AD. Both the quadrilateral and the triangular type were employed.[60][61][62][63][64][65][66][67][68][69]
Roller bearings	Archaeologically attested in the Lake Nemi ships[70]
Rudder, stern-mounted	See image for something very close to being a sternpost rudder
Sausage, fermented dry (probably)	See salami.
Screw press	An innovation of about the mid-1st century AD[71]
Sewers	See for example Cloaca Maxima
Soap, hard (sodium)	First mentioned by Galen (earlier, potassium, soap being Celtic).
Spiral staircase	Though first attested as early as the 5th century BC in Greek Selinunte, spiral staircases only become more widespread after their adoption in Trajan's column and the Column of Marcus Aurelius.
Stenography, a system of	See Tironian notes.
Street map, early	See Forma Urbis Romae (Severan Marble Plan), a carved marble ground plan of every architectural feature in ancient Rome.[72]
Sundial, portable	See Theodosius of Bithynia
Surgical instruments, various
Tooth implants, iron	From archaeological evidence in Gaul[73]
Towpath	e.g. beside the Danube, see the "road" in Trajan's bridge
Tunnels	Excavated from both ends simultaneously. The longest known is the 5.6-kilometre (3.5 mi) drain of the Fucine lake
Vehicles, one wheeled	Solely attested by a Latin word in 4th century AD Scriptores Historiae Augustae Heliogabalus 29. As this is fiction, the evidence dates to its time of writing.
Wood veneer	Pliny Nat. Hist. 16. 231–2

See also

• Maritime hydraulics in antiquity
• De Architectura
• Ancient Greek technology
• History of science in Classical Antiquity
• List of Byzantine inventions

References

1. Lancaster, Lynn (2008). Engineering and Technology in the Classical World. New York: Oxford University Press. pp. 260–266. ISBN 9780195187311.
2. Davies, Gwyn (2008). Engineering and Technology in the Classical World. New York: Oxford University Press. pp. 707–710. ISBN 9780195187311.
3. Landels, John G. (1978). Engineering in the Ancient World. London: Chatto & Windus. pp. 9–32. ISBN 0701122218.
4. Nikolic, Milorad (2014). Themes in Roman Society and Culture. Canada: Oxford University Press. pp. 355–375. ISBN 9780195445190.
5. Neubuger, Albert, and Brose, Henry L (1930). The Technical Arts and Sciences of the Ancients. New York: Macmillan Company. pp. 397–408.
6. Michael Matheus: "Mittelalterliche Hafenkräne," in: Uta Lindgren (ed.): Europäische Technik im Mittelalter. 800–1400, Berlin 2001 (4th ed.), pp. 345–48 (345)
7. Marder, Tod A., and, Wilson Jones, Mark (2014). The Pantheon: From Antiquity to the Present. New York: Cambridge University Press. p. 102. ISBN 9780521809320.CS1 maint: multiple names: authors list (link)
8. Marder, Tod A, Wilson Jones, Mark (2014). The Pantheon: From Antiquity to the Present. New York: Cambridge University Press. p. 126. ISBN 9780521809320.
9. Marder, Tod A, Wilson Jones, Mark (2014). The Pantheon: From Antiquity to the Present. New York: Cambridge University Press. p. 173. ISBN 9780521809320.
10. Livingston, R (1993). "Materials Analysis Of The Masonry Of The Hagia Sophia Basilica, Istanbul". WIT Transactions on the Built Environment. 3: 20–26 – via ProQuest.
11. GRST-engineering.
12. Frontinus.
13. Chandler, Fiona "The Usborne Internet Linked Encyclopedia of the Roman World", page 80. Usborne Publishing 2001
14. Forman, Joan "The Romans", page 34. Macdonald Educational Ltd. 1975
15. Water History.
16. J. Crow 2007 "Earth, walls and water in Late Antique Constantinople" in Technology in Transition AD 300–650 in ed. L.Lavan, E.Zanini & A. Sarantis Brill, Leiden
17. Greene 2000, p. 39
18. Smith, Norman (1978). "Roman Hydraulic Technology". Scientific American. 238, no. 5: 154–61 – via JSTOR.
19. Nikolic, Milorad (2014). Themes in Roman Society and Culture. Canada: Oxford University Press. pp. 355–375. ISBN 9780195445190.
20. Lancaster, Lynn (2008). The Oxford Handbook of Engineering and Technology in the Classical World. New York: Oxford University Press. p. 261. ISBN 9780195187311.
21. http://www.themodernantiquarian.com/site/10854/knossos.html#fieldnotes
22. Bruce, Alexandra. 2012: Science or Superstition: The Definitive Guide to the Doomsday Phenomenon, pg 26.
23. Neuburger, Albert and, Brose, Henry L (1930). The Technical Arts and Sciences of the Ancients. New York: Macmillan Company. pp. 366–76.
24. Gabriel, Richard A. The Great Armies of Antiquity. Westport, Conn: Praeger, 2002. Page 9.
25. Rossi, Cesare, Thomas Chondros, G. Milidonis, Kypros Savino, and F. Russo (2016). "Ancient Road Transport Devices: Developments from the Bronze Age to the Roman Empire". Frontiers of Mechanical Engineering. 11, no.1: 12–25 – via Springer.CS1 maint: multiple names: authors list (link)
26. Hrdlicka, Daryl (October 29, 2004). "HOW Hard Does It Hit? A Study of Atlatl and Dart Ballistics" (PDF). Thudscave (PDF).
27. Zhmodikov, Alexander (September 5, 2017). "Roman Republican Heavy Infantrymen in Battle (IV-II Centuries B.C.)". Historia: Zeitschrift für Alte Geschichte. 49 (1): 67–78. JSTOR 4436566.
28. M, Dattatreya; al (2016-11-11). "10 Incredible Roman Military Innovations You Should Know About". Realm of History. Retrieved 2017-05-09.
29. "Corvus – Livius". www.livius.org. Retrieved 2017-03-06.
30. M, Dattatreya; al (2016-11-11). "10 Incredible Roman Military Innovations You Should Know About". Realm of History. Retrieved 2017-05-09.
31. Rossi, Cesare, Thomas Chondros, G. Milidonis, Kypros Savino, and F. Russo (2016). "Ancient Road Transport Devices: Developments from the Bronze Age to the Roman Empire". Frontiers of Mechanical Engineering. 11, no.1: 12–25 – via Springer.CS1 maint: multiple names: authors list (link)
32. M, Dattatreya; al (2016-11-11). "10 Incredible Roman Military Innovations You Should Know About". Realm of History. Retrieved 2017-05-09.
33. M, Dattatreya; al (2016-11-11). "10 Incredible Roman Military Innovations You Should Know About". Realm of History. Retrieved 2017-05-09.
34. Hodges, Henry (1992). Technology in the Ancient World. Barnes & Noble Publishing. p. 167.
35. Cuomo, S. (2007). Technology and Culture in Greek and Roman Antiquity. Cambridge, U.K.: Cambridge University Press. pp. 17–35.
36. Andrews, Evan (November 20, 2012). "10 Innovations That Built Ancient Rome". The History Channel. Retrieved 2017-05-09.
37. A. Archontidou 2005 Un atelier de preparation de l'alun a partir de l'alunite dans l'isle de Lesbos in L'alun de Mediterranee ed P.Borgard et al.
38. Galliazzo 1995, p. 92
39. R.W.Bulliet, The Camel and the Wheel 1975; 197
40. Giannichedda 2007 "Metal production in Late Antiquity" in Technology in Transition AD 300–650 ed L. Lavan E.Zanini & A. Sarantis Brill, Leiden; p200
41. Laur-Belart 1988, pp. 51–52, 56, fig. 42
42. Ritti, Grewe & Kessener 2007, p. 161; Grewe 2009, pp. 429–454
43. Smith 1971, pp. 33–35; Schnitter 1978, p. 31; Schnitter 1987a, p. 12; Schnitter 1987c, p. 80; Hodge 1992, p. 82, table 39; Hodge 2000, p. 332, fn. 2
44. S. Agusta-Boularot et J-l. Paillet 1997 "le Barrage et l'Aqueduc occidental de Glanum: le premier barrage-vout de l'historire des techniques?" Revue Archeologique pp 27–78
45. Schnitter 1978, p. 32; Schnitter 1987a, p. 13; Schnitter 1987c, p. 80; Hodge 1992, p. 92; Hodge 2000, p. 332, fn. 2
46. Schnitter 1987a, p. 12; James & Chanson 2002
47. Smith 1971, pp. 35f.; James & Chanson 2002
48. Arenillas & Castillo 2003
49. Schnitter 1987a, p. 13; Hodge 2000, pp. 337f.
50. Vogel 1987, p. 50
51. Schnitter 1978, p. 29; Schnitter 1987b, pp. 60, table 1, 62; James & Chanson 2002; Arenillas & Castillo 2003
52. I. Longhurst 2007 Ambix 54.3 pp. 299–304 The identity of Pliny's Flos salis and Roman Perfume
53. C-H Wunderlich "Light and economy: an essay about the economy of pre-historic and ancient lamps" in Nouveautes lychnologiques 2003
54. C. van Driel-Murray Ancient skin processing and the impact of Rome on tanning technology in Le Travail du cuir de la prehistoire 2002 Antibes
55. Ritti, Grewe & Kessener 2007, p. 154; Grewe 2009, pp. 429–454
56. Ritti, Grewe & Kessener 2007, p. 156, fn. 74
57. Smith 1970, pp. 60f.; Smith 1971, p. 26
58. Hodge 1992, p. 87
59. Casson, Lionel (1995). Ships and Seamanship in the Ancient World. The Johns Hopkins University Press. ISBN 0-8018-5130-0, Appendix
60. Casson 1995, pp. 243–245
61. Casson 1954
62. White 1978, p. 255
63. Campbell 1995, pp. 8–11
64. Basch 2001, pp. 63–64
65. Makris 2002, p. 96
66. Friedman & Zoroglu 2006, pp. 113–114
67. Pryor & Jeffreys 2006, pp. 153–161
68. Castro et al. 2008, pp. 1–2
69. Whitewright 2009
70. Il Museo delle navi romane di Nemi : Moretti, Giuseppe, d. 1945. Roma : La Libreria dello stato
71. H Schneider Technology in The Cambridge Economic History of the Greco-Roman World 2007; p157 CUP
72. Stanford University: Forma Urbis Romae
73. BBC: Tooth and nail dentures

Further reading

• Wilson, Andrew (2002), "Machines, Power and the Ancient Economy", The Journal of Roman Studies, Society for the Promotion of Roman Studies, Cambridge University Press, 92, pp. 1–32, doi:10.2307/3184857, JSTOR 3184857
• Greene, Kevin (2000), "Technological Innovation and Economic Progress in the Ancient World: M.I. Finley Re-Considered", The Economic History Review, 53 (1), pp. 29–59, doi:10.1111/1468-0289.00151
• Derry, Thomas Kingston and Trevor I. Williams. A Short History of Technology: From the Earliest Times to A.D. 1900. New York : Dover Publications, 1993
• Williams, Trevor I. A History of Invention From Stone Axes to Silicon Chips. New York, New York, Facts on File, 2000
• Lewis, M. J. T. (2001), "Railways in the Greek and Roman world", in Guy, A.; Rees, J. (eds.), Early Railways. A Selection of Papers from the First International Early Railways Conference (PDF), pp. 8–19 (10–15), archived from the original (PDF) on 2010-03-12
• Galliazzo, Vittorio (1995), I ponti romani, Vol. 1, Treviso: Edizioni Canova, pp. 92, 93 (fig. 39), ISBN 88-85066-66-6
• Werner, Walter (1997), "The largest ship trackway in ancient times: the Diolkos of the Isthmus of Corinth, Greece, and early attempts to build a canal", The International Journal of Nautical Archaeology, 26 (2): 98–119, doi:10.1111/j.1095-9270.1997.tb01322.x
• Neil Beagrie, "The Romano-British Pewter Industry", Britannia, Vol. 20 (1989), pp. 169–91
• Grewe, Klaus (2009), "Die Reliefdarstellung einer antiken Steinsägemaschine aus Hierapolis in Phrygien und ihre Bedeutung für die Technikgeschichte. Internationale Konferenz 13.−16. Juni 2007 in Istanbul", in Bachmann, Martin (ed.), Bautechnik im antiken und vorantiken Kleinasien (PDF), Byzas, 9, Istanbul: Ege Yayınları/Zero Prod. Ltd., pp. 429–454, ISBN 978-975-8072-23-1, archived from the original (PDF) on 2011-05-11
• Lewis, M.J.T., 1997, Millstone and Hammer, University of Hull Press
• Moritz, L.A., 1958, Grainmills and Flour in Classical Antiquity, Oxford
• Ritti, Tullia; Grewe, Klaus; Kessener, Paul (2007), "A Relief of a Water-powered Stone Saw Mill on a Sarcophagus at Hierapolis and its Implications", Journal of Roman Archaeology, 20: 138–163, doi:10.1017/S1047759400005341
• Oliver Davies, "Roman Mines in Europe", Clarendon Press (Oxford), 1935.
• Jones G. D. B., I. J. Blakey, and E. C. F. MacPherson, "Dolaucothi: the Roman aqueduct," Bulletin of the Board of Celtic Studies 19 (1960): 71–84 and plates III-V.
• Lewis, P. R. and G. D. B. Jones, "The Dolaucothi gold mines, I: the surface evidence," The Antiquaries Journal, 49, no. 2 (1969): 244–72.
• Lewis, P. R. and G. D. B. Jones, "Roman gold-mining in north-west Spain," Journal of Roman Studies 60 (1970): 169–85.
• Lewis, P. R., "The Ogofau Roman gold mines at Dolaucothi," The National Trust Year Book 1976–77 (1977).
• Barry C. Burnham, "Roman Mining at Dolaucothi: the Implications of the 1991–3 Excavations near the Carreg Pumsaint", Britannia 28 (1997), 325–336
• A.H.V. Smith, "Provenance of Coals from Roman Sites in England and Wales", Britannia, Vol. 28 (1997), pp. 297–324
• Basch, Lucien (2001), "La voile latine, son origine, son évolution et ses parentés arabes", in Tzalas, H. (ed.), Tropis VI, 6th International Symposium on Ship Construction in Antiquity, Lamia 1996 proceedings, Athens: Hellenic Institute for the Preservation of Nautical Tradition, pp. 55–85
• Campbell, I.C. (1995), "The Lateen Sail in World History" (PDF), Journal of World History, 6 (1), pp. 1–23
• Casson, Lionel (1954), "The Sails of the Ancient Mariner", Archaeology, 7 (4), pp. 214–219
• Casson, Lionel (1995), Ships and Seamanship in the Ancient World, Johns Hopkins University Press, ISBN 0-8018-5130-0
• Castro, F.; Fonseca, N.; Vacas, T.; Ciciliot, F. (2008), "A Quantitative Look at Mediterranean Lateen- and Square-Rigged Ships (Part 1)", The International Journal of Nautical Archaeology, 37 (2), pp. 347–359, doi:10.1111/j.1095-9270.2008.00183.x
• Friedman, Zaraza; Zoroglu, Levent (2006), "Kelenderis Ship. Square or Lateen Sail?", The International Journal of Nautical Archaeology, 35 (1), pp. 108–116, doi:10.1111/j.1095-9270.2006.00091.x
• Makris, George (2002), "Ships", in Laiou, Angeliki E (ed.), The Economic History of Byzantium. From the Seventh through the Fifteenth Century, 2, Dumbarton Oaks, pp. 89–99, ISBN 0-88402-288-9
• Pomey, Patrice (2006), "The Kelenderis Ship: A Lateen Sail", The International Journal of Nautical Archaeology, 35 (2), pp. 326–335, doi:10.1111/j.1095-9270.2006.00111.x
• Pryor, John H.; Jeffreys, Elizabeth M. (2006), The Age of the ΔΡΟΜΩΝ: The Byzantine Navy ca. 500–1204, Brill Academic Publishers, ISBN 978-90-04-15197-0
• Toby, A.Steven "Another look at the Copenhagen Sarcophagus", International Journal of Nautical Archaeology 1974 vol.3.2: 205–211
• White, Lynn (1978), "The Diffusion of the Lateen Sail", Medieval Religion and Technology. Collected Essays, University of California Press, pp. 255–260, ISBN 0-520-03566-6
• Whitewright, Julian (2009), "The Mediterranean Lateen Sail in Late Antiquity", The International Journal of Nautical Archaeology, 38 (1), pp. 97–104, doi:10.1111/j.1095-9270.2008.00213.x
• Drachmann, A. G., Mechanical Technology of Greek and Roman Antiquity, Lubrecht & Cramer Ltd, 1963 ISBN 0-934454-61-2
• Hodges, Henry., Technology in the Ancient World, London: The Penguin Press, 1970
• Landels, J.G., Engineering in the Ancient World, University of California Press, 1978
• White, K.D., Greek and Roman Technology, Cornell University Press, 1984
• Sextus Julius Frontinus; R. H. Rodgers (translator) (2003), De Aquaeductu Urbis Romae [On the water management of the city of Rome], University of Vermont, retrieved 16 August 2012
• Roger D. Hansen, "International Water History Association", Water and Wastewater Systems in Imperial Rome, retrieved 2005-11-22
• Rihll, T.E. (2007-04-11), Greek and Roman Science and Technology: Engineering, Swansea University, retrieved 2008-04-13
• Arenillas, Miguel; Castillo, Juan C. (2003), "Dams from the Roman Era in Spain. Analysis of Design Forms (with Appendix)", 1st International Congress on Construction History [20th–24th January], Madrid
• Hodge, A. Trevor (1992), Roman Aqueducts & Water Supply, London: Duckworth, ISBN 0-7156-2194-7
• Hodge, A. Trevor (2000), "Reservoirs and Dams", in Wikander, Örjan (ed.), Handbook of Ancient Water Technology, Technology and Change in History, 2, Leiden: Brill, pp. 331–339, ISBN 90-04-11123-9
• James, Patrick; Chanson, Hubert (2002), "Historical Development of Arch Dams. From Roman Arch Dams to Modern Concrete Designs", Australian Civil Engineering Transactions, CE43: 39–56
• Laur-Belart, Rudolf (1988), Führer durch Augusta Raurica (5th ed.), Augst
• Schnitter, Niklaus (1978), "Römische Talsperren", Antike Welt, 8 (2): 25–32
• Schnitter, Niklaus (1987a), "Verzeichnis geschichtlicher Talsperren bis Ende des 17. Jahrhunderts", in Garbrecht, Günther (ed.), Historische Talsperren, Stuttgart: Verlag Konrad Wittwer, pp. 9–20, ISBN 3-87919-145-X
• Schnitter, Niklaus (1987b), "Die Entwicklungsgeschichte der Pfeilerstaumauer", in Garbrecht, Günther (ed.), Historische Talsperren, Stuttgart: Verlag Konrad Wittwer, pp. 57–74, ISBN 3-87919-145-X
• Schnitter, Niklaus (1987c), "Die Entwicklungsgeschichte der Bogenstaumauer", in Garbrecht, Günther (ed.), Historische Talsperren, Stuttgart: Verlag Konrad Wittwer, pp. 75–96, ISBN 3-87919-145-X
• Smith, Norman (1970), "The Roman Dams of Subiaco", Technology and Culture, 11 (1): 58–68, doi:10.2307/3102810, JSTOR 3102810
• Smith, Norman (1971), A History of Dams, London: Peter Davies, pp. 25–49, ISBN 0-432-15090-0
• Vogel, Alexius (1987), "Die historische Entwicklung der Gewichtsmauer", in Garbrecht, Günther (ed.), Historische Talsperren, Stuttgart: Verlag Konrad Wittwer, pp. 47–56, ISBN 3-87919-145-X

External links

• Traianus – Technical investigation of Roman public works
• Roman Traction Systems – Horse, harness, wagon
• Roman Horse Harnesses – With pictorial evidence
• Roman Concrete – Roman concrete buildings