Americium dioxide

Americium dioxide (AmO2) is a black[1] compound of americium. In the solid state AmO2 adopts the fluorite, CaF2 structure.[2] It is used as a source of alpha particles.

Americium dioxide
Names
IUPAC name
Americium(IV) oxide
Identifiers
3D model (JSmol)
ECHA InfoCard 100.031.324
EC Number
  • 234-471-0
Properties
AmO2
Molar mass 275 g·mol−1
Appearance Black crystals
Density 11.68 g/cm3
Structure
Fluorite (cubic), cF12
Fm3, No. 225
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Historical use

Synthesis of americium dioxide involves precipitating/water a solution of americium in hydrochloric acid (HCl) solution as described by the Oak Ridge National Laboratory.[3] The demand for americium dioxide stems from the difficulty of storing the element americium as a liquid in the hydrochloric acid solution because the alpha radiation and hydrochloric acid decomposes storage containers over time. To solve the liquid storage problem, Oak Ridge National Laboratory devised a synthesis to turn liquid americium-acid solution into a precipitated form of americium for safer handling and more efficient storage.[3]

Synthesis (1960)

Synthesis of americium dioxide as described by the Oak Ridge National Laboratory includes making a solution of americium in hydrochloric acid by adding americium to hydrochloric acid, then neutralizing the acid as using ammonium hydroxide (NH4OH).[3]

After neutralization using ammonium hydroxide, a saturated oxalic acid solution was added to the now neutralized solution. This causes large americium oxalate crystals to begin to grow; once complete precipitation is achieved, oxalic acid is then added, once again, to attain a slurry. The slurry of americium oxalate and oxalic acid is next agitated before the americium oxalate is filtered out, washed with water, and is partially dried by allowing air to flow through it. Oak Ridge National Laboratory researchers noted that the americium oxalate that was filtered out has a "dusty rose color" appearance.

The americium oxalate is then added to a platinum boat to undergo calcination. The americium oxalate precipitate is dried in a furnace and will begin to decompose at 350 °C. When decomposition begins to occur, the oxalate will turn into the desired black americium dioxide; to ensure no oxalate remains in the newly forming dioxide, the oven temperature is increased and held at 800 °C then slowly allowed to cool to room temperature.

Americium-aluminium alloys

Americium-aluminium alloys can be formed by melting americium dioxide with aluminium and an additional fluxing agent.[4] The created alloy can undergo neutron irradiation to produce other transuranic nuclides.[5]

gollark: This is a Markov chain. It's some accursed heavcode.
gollark: It's unfast.
gollark: I could, but it would be bad.
gollark: +<markov <@331320482047721472>
gollark: It would take HOURS of training.

References
  1. Greenwood, N. N. & Earnshaw, A. (1997). Chemistry of the Elements (2nd ed.). Pergamon Press. p. 1267. ISBN 0-08-022057-6.
  2. Wells, A. F. (Alexander Frank) (1984). Structural inorganic chemistry. Oxford: Clarendon Press. ISBN 978-0-19-855370-0.
  3. "Preparation of Americium Dioxide by Thermal Decomposition of Americium Oxalate in Air" (PDF). Oak Ridge National Laboratory. December 1960. Retrieved 2 May 2013.
  4. "Preparation of Americium-Aluminium Alloys". KERNFORSCHUNG GMBH GES FUER. January 1974. Archived from the original on 2013-06-29. Retrieved May 3, 2013.
  5. "Toxicological profile for americium" (PDF). U.S. Department of Health and Human Services. April 2004. Retrieved 15 January 2011.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.