HMS Investigator (1848)

HMS Investigator was a merchant ship purchased in 1848 to search for Sir John Franklin's ill-fated Northwest Passage expedition. She made two voyages to the Arctic and had to be abandoned in 1853, after becoming trapped in the ice.

For other ships with the same name, see HMS Investigator.

HMS Investigator stuck in ice
History
United Kingdom
Name: HMS Investigator
Operator: Royal Navy
Builder: Scotts Shipbuilding Company
Cost: £25,337
Acquired: February 1848 (1848-02)
Abandoned:3 June 1853 (1853-06-03)
General characteristics
Class and type: Survey vessel
Tons burthen: 422–480 tonnes BOM[1]
Length: 118 feet (36 metres)
Beam: 28 1⁄4 feet (8.6 metres)
Depth of hold: 18 11⁄12 feet (5.8 metres)
Sail plan: Barque-rigged

Her wreckage was found in July 2010, off Banks Island in the Beaufort Sea. She was the fourth ship of the Royal Navy to bear the name.

Characteristics

Built at Scotts Shipbuilding and Engineering Company of Greenock on the Firth of Clyde, and running 422 tonnes, Investigator was purchased by the Admiralty in February 1848 and was fitted for Arctic exploration by R. & H. Green at Blackwall Yard on the River Thames.[2]

She was strengthened for Arctic service by William M. Rice, master shipwright of Woolwich Dockyard. She was extensively strengthened with timber—teak, English oak, Canadian elm—and ​5⁄16 inch (8 mm) steel plating. Ten pairs of wrought iron diagonal riders were set in the hold, with ten pairs of diagonal plates on the sides of the vessel between decks.

To cope with snow and ice loads, the upper decks were doubled with three-inch (76 mm) fir planking. Preston's Patent Ventilating Illuminators were installed to improve light and ventilation. Charles Sylvester's warming apparatus, a modern stove system capable of warming the entire ship, was also employed with good results.[3] The same or similar device had been used by William Edward Parry in 1821, to prevent condensation and aerate the lowest deck.

Career
Enterprise and Investigator (right)

In 1848, she accompanied HMS Enterprise on James Clark Ross's expedition to find the missing Franklin expedition. Also aboard Investigator on this expedition was naturalist Edward Adams. On their return journey she was commanded by Robert McClure,[4] but the ship became trapped in the ice and was abandoned on 3 June 1853, in Mercy Bay, where she had been stuck for nearly three years.[2]

The following year, she was inspected by crews of HMS Resolute, still frozen in, and reported to be in fair condition despite having taken on some water during the summer thaw.

Unlike the loss of Erebus and Terror, the events surrounding Investigator's abandonment are not a mystery. McClure provided an official account of the journey, and the ship's surgeon, Alexander Armstrong, published an unofficial account in 1857.[5] However, the location of her wreckage remained unknown for over 150 years because of difficulties in reaching the area, which is inhospitable and frequently iced over.[6]

Legacy
Investigator is abandoned in Mercy Bay

Oral traditions of the Inuit tell stories of the ship. The abandoned ship was a source of copper and iron for the indigenous people in the area; metal nails were missing from smaller boats on the shore when they were discovered.[6] One Inuit account from 1910 noted that "one year she had still been on the beach and the next year she was gone without a trace."[7] When Canadian anthropologist Vilhjalmur Stefansson reached Mercy Bay during his 1915 voyage to the Arctic, he failed to find her remains.

After meeting the Inuit who made pilgrimages to the wreckage, he suggested a link between the Investigator's stranding and the absence of muskoxen on Banks Island. He speculated that the Inuit had killed off the animals during their journeys to and from the wreckage over the 40 years since abandonment. The muskoxen have since repopulated the island and now number nearly 50,000.[8]

Discovery of wreck

In July 2010, a team of Parks Canada scientists, archaeologists, and surveyors began searching for the sunken Investigator in Mercy Bay at the northern tip of Aulavik National Park. It was the first expedition to search for the ship.[9][10] The team arrived on Banks Island in the Beaufort Sea on 22 July and began a sonar scan of the area three days later.[6][11] Its remains were discovered on the shores of the island with the deck of the ship about eight meters (30 ft) below the surface.

According to a superintendent with Parks Canada, the ship was found "sitting upright in silt; the three masts have been removed, probably by ice."[12] She lies partially buried in silt 150 meters (500 ft) off the north shore of Banks Island. The cold arctic water prevented the outer deck from deteriorating quickly. There are no plans to raise the ship's remains, although the team did send a remotely operated underwater vehicle to take photos.[6]

Footnotes
  1. Colledge 2006, p. 174.
  2. Winfield 2004, p. 141.
  3. Armstrong 1857.
  4. Davis, P. "Mid-Victorian RN vessel HMS Investigator". William Loney RN. Retrieved 29 July 2010.
  5. "HMS Investigator is familiar wreckage". The Globe and Mail. 28 July 2010. Retrieved 29 July 2010.
  6. "Abandoned 1854 ship found in Arctic". CBC News. 28 July 2010. Retrieved 29 July 2010.
  7. Stefansson 1922, p. 361.
  8. Struzik, E. (25 July 2010). "In Far North, a missing ship could hold the key to a century-old muskoxen mystery". Edmonton Journal. Retrieved 26 July 2010.
  9. Ormsby, M. (2 July 2010). "Canada searches for Sir John Franklin's rescue ship". Toronto Star. Retrieved 29 July 2010.
  10. Griffiths, S. (21 July 2010). "Canadian archaeologists hunt long-lost Arctic explorers". BBC News. Retrieved 29 July 2010.
  11. Martin, D. (28 July 2010). "How the Arctic search team found HMS Investigator". National Post. Archived from the original on 11 August 2010. Retrieved 17 June 2019.
  12. Martin, D. (28 July 2010). "Historic Northwest Passage wreckage discovered beneath Beaufort Sea". Calgary Herald. Retrieved 29 July 2010.

Bibliography
gollark: TIS-100 nodes have two registers and basic arithmetic.
gollark: Probably.
gollark: Yes, it is.
gollark: Nodes without a preloaded program can be transferred a boot program.
gollark: It's like TIS-100 but eventually to be made 3D, self-modifying-code-capable due to having machine code, and infinite.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.