Styrene-acrylonitrile resin

Styrene acrylonitrile resin is a copolymer plastic consisting of styrene and acrylonitrile. It is also known as SAN. It is widely used in place of polystyrene owing to its greater thermal resistance. The chains of between 70 and 80% by weight styrene and 20 to 30% acrylonitrile.[1] Larger acrylonitrile content improves mechanical properties and chemical resistance, but also adds a yellow tint to the normally transparent plastic.[2]

Styrene acrylonitrile
Names
Other names
SAN
Identifiers
ChemSpider
  • none
ECHA InfoCard 100.127.519
Properties
(C8H8)n-(C3H3N)m
Molar mass variable
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Properties

SAN is similar in use to polystyrene. Like polystyrene itself, it is optically transparent and brittle in mechanical behavior. The copolymer has a glass transition temperature greater than 100 °C owing to the acrylonitrile units in the chain, thus making the material resistant to boiling water. It is structurally related to ABS plastic, where polybutadiene is copolymerised with SAN to give a much tougher material. The rubber chains form separate phases which are 10-20 micrometers in diameter. When the product is stressed, crazing from the particles helps to increase the strength of the polymer. The method of rubber toughening has been used to strengthen other polymers such as PMMA and nylon.

Uses

Uses include food containers, water bottles, kitchenware, computer products, packaging material, battery cases and plastic optical fibers.

Health risks

The acrylonitrile from SAN containers has been found to migrate to content in variable amounts.[3] Acrylonitrile is classified as a Class 2B carcinogen (possibly carcinogenic) by the International Agency for Research on Cancer (IARC).[4] Acrylonitrile has been shown to increase rates of cancer appearance in high dosage tests in male and female rats and mice.[5]

gollark: I mean, from what I've read, the evidence it does something is minimal, and it *definitely* has problematic side effects.
gollark: Trump did suggest that people research injecting disinfectant to cure COVID-19 as well as being obsessed with hydroxychloroquine for a bit, no?
gollark: ⒲⒣⒴ ⒟⒤⒟ ⒯⒣⒠⒴ ⒟⒪ ⒯⒣⒤⒮
gollark: 𝙔𝙖𝙮 𝙛𝙤𝙧 𝙐𝙣𝙞𝙘𝙤𝙙𝙚 𝙝𝙖𝙫𝙞𝙣𝙜 𝙨𝙥𝙚𝙘𝙞𝙖𝙡 𝙛𝙤𝙣𝙩𝙨 𝙗𝙪𝙞𝙡𝙩 𝙞𝙣 𝙛𝙤𝙧 𝙨𝙤𝙢𝙚 𝙧𝙚𝙖𝙨𝙤𝙣!
gollark: 𝓦𝓱𝔂 𝓷𝓸𝓽 𝓼𝓹𝓮𝓪𝓴 𝓲𝓷 𝓬𝓾𝓻𝓼𝓲𝓿𝓮?

References
  1. "Ullmann's Encyclopedia of Industrial Chemistry". Vol 29. Polystyrene and Styrene Copolymers. Wiley Online Library. p. 487
  2. Charles A. Harper, ed., Modern Plastics Handbook, ISBN 0-07-026714-6, 2000.
  3. http://www.agriculturejournals.cz/publicFiles/00366.pdf
  4. "Re-evaluation of Some Organic Chemicals, Hydrazine and Hydrogen Peroxide". IARC Monographs, Volume 71 (1999)
  5. "Acrylonitrile: Carcinogenic Potency Database". berkeley.edu.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.