Separation process

A separation process is a method that converts a mixture or solution of chemical substances into two or more distinct product mixtures.[1] At least one of results of the separation is enriched in one or more of the source mixture's constituents. In some cases, a separation may fully divide the mixture into pure constituents. Separations exploit differences in chemical properties or physical properties (such as size, shape, mass, density, or chemical affinity) between the constituents of a mixture.

Part of a series on
Chemical engineering
Fundamentals
Unit processes
Aspects
Glossaries
Category

Processes are often classified according to the particular differences they use to achieve separation. If no single difference can be used to accomplish the desired separation, multiple operations can often be combined to achieve the desired end.

With a few exceptions, elements or compounds exist in nature in an impure state. Often these raw materials must go through a separation before they can be put to productive use, making separation techniques essential for the modern industrial economy.

The purpose of separation may be analytical, can be used as a lie component in the original mixture without any attempt to save the fractions, or maybe preparative, i.e. to "prepare" fractions or samples of the components that can be saved. The separation can be done on a small scale, effectively a laboratory scale for analytical or preparative purposes, or on a large scale, effectively an industrial scale for preparative purposes, or on some intermediate scale.

Complete and incomplete separation

In some cases, separations require total purification, as in the electrolysis refining of bauxite ore for aluminum metal, but a good example of an incomplete separation technique is oil refining. Crude oil occurs naturally as a mixture of various hydrocarbons and impurities. The refining process splits this mixture into other, more valuable mixtures such as natural gas, gasoline and chemical feedstocks, none of which are pure substances, but each of which must be separated from the raw crude. In both of these cases, a series of separations is necessary to obtain the desired end products. In the case of oil refining, crude is subjected to a long series of individual distillation steps, each of which produces a different product or intermediate.

Separating liquids

Separators are used to divide liquids. Vertically supported centrifuges are built with flying bearings. A separator is a continuous sedimentation centrifuge. Both exit streams are continuously discharged, using a pump (under pressure) or pressure-free. The solid material can be discharged discontinuously (chamber drum, solid-walled disc drum), pseudo continuously (self-cleaning disc drum) or continuously (nozzle drum). The drum is the centerpiece of the separator, in which the separation process takes place. There are two types of drums: the chamber drum (known as chamber separators) and the disc drum (known as disc separators). The power transmission on the spindle and thereby on the drum can take place by using one of the three drive motors: helical gears, a belt drive or direct drive, via a special motor. The sealing of the separators is differentiated into four types: open, semi-closed, hydro-hermetic (sealing of the product space) or fully hermetic (absolute airtight).

List of separation techniques

Chromatography

Chromatography separates dissolved substances by different interaction with (i.e., travel through) a material.

Electrophoresis

Electrophoresis, separates organic molecules based on their different interaction with a gel under an electric potential (i.e., different travel)

  • Electrostatic separation, works on the principle of corona discharge, where two plates are placed close together and high voltage is applied. This high voltage is used to separate the ionized particles.
  • Elutriation
  • Evaporation

Extraction

Flotation
  • Flotation
    • Dissolved air flotation, removes suspended solids non-selectively from slurry by bubbles that are generated by air coming out of solution
    • Froth flotation, recovers valuable, hydrophobic solids by attachment to air bubbles generated by mechanical agitation of an air-slurry mixture, which floats, and are recovered
    • Deinking, separating hydrophobic ink particles from the hydrophilic paper pulp in paper recycling
gollark: And far less magic.
gollark: Though at least *it* has generics!
gollark: Same problem as Go, except instead of simplicity they went for overcomplicated crazy syntactical whatsits.
gollark: No.
gollark: Well, you might write less code if you're busy staring at blurry text.

See also

References
  1. Wilson, Ian D.; Adlard, Edward R.; Cooke, Michael; et al., eds. (2000). Encyclopedia of separation science. San Diego: Academic Press. ISBN 978-0-12-226770-3.

Further reading
  • National Academies of Sciences, Engineering, and Medicine (2019). A Research Agenda for Transforming Separation Science (Report). Washington, DC: The National Academies Press. doi:10.17226/25421.CS1 maint: multiple names: authors list (link)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.