Antikythera mechanism

The Antikythera mechanism (/ˌæntɪkɪˈθɪərə/ AN-tih-kih-THIH-ə-rə, /ˌæntiːˈkɪθʌrə/ AN-tee-KIH-thuh-rə) is an ancient hand-powered Greek analogue computer[1] which has also been described as the first example of such device[2][3][4] used to predict astronomical positions and eclipses for calendar and astrological purposes decades in advance.[5][6][7] It could also be used to track the four-year cycle of athletic games which was similar to an Olympiad, the cycle of the ancient Olympic Games.[8][9][10]

Antikythera mechanism
Αντικύθηρα
The Antikythera mechanism (Fragment A–Front and Rear); visible is the largest gear in the mechanism, approximately 14 centimetres (5.5 in) in diameter.
WritingAncient Greek
Period/cultureHellenistic
Discovered1901
Antikythera, Greece
Present locationNational Archaeological Museum, Athens

This artefact was retrieved from the sea in 1901, and identified on 17 May 1902 as containing a gear by archaeologist Valerios Stais,[11] among wreckage retrieved from a shipwreck off the coast of the Greek island Antikythera.[12][13] The instrument is believed to have been designed and constructed by Greek scientists and has been variously dated to about 87 BC,[14] or between 150 and 100 BC,[5] or to 205 BC,[15][16] or to within a generation before the shipwreck, which has been dated to approximately 70–60 BC.[17][18]

The device, housed in the remains of a 34 cm × 18 cm × 9 cm (13.4 in × 7.1 in × 3.5 in) wooden box, was found as one lump, later separated into three main fragments which are now divided into 82 separate fragments after conservation efforts. Four of these fragments contain gears, while inscriptions are found on many others.[19][20] The largest gear is approximately 14 centimetres (5.5 in) in diameter and originally had 223 teeth.[21]

It is a complex clockwork mechanism composed of at least 30 meshing bronze gears. A team led by Mike Edmunds and Tony Freeth at Cardiff University used modern computer x-ray tomography and high resolution surface scanning to image inside fragments of the crust-encased mechanism and read the faintest inscriptions that once covered the outer casing of the machine.

Detailed imaging of the mechanism suggests that it had 37 gear wheels enabling it to follow the movements of the Moon and the Sun through the zodiac, to predict eclipses and even to model the irregular orbit of the Moon, where the Moon's velocity is higher in its perigee than in its apogee. This motion was studied in the 2nd century BC by astronomer Hipparchus of Rhodes, and it is speculated that he may have been consulted in the machine's construction.[22]

The knowledge of this technology was lost at some point in antiquity. Similar technological works later appeared in the medieval Byzantine and Islamic worlds, but works with similar complexity did not appear again until the development of mechanical astronomical clocks in Europe in the fourteenth century.[23] All known fragments of the Antikythera mechanism are now kept at the National Archaeological Museum in Athens, along with a number of artistic reconstructions and replicas[24][25] of the mechanism to demonstrate how it may have looked and worked.[26]

History
See also: Antikythera wreck

Discovery
Derek J. de Solla Price (1922–1983) with a model of the Antikythera mechanism

Captain Dimitrios Kontos (Δημήτριος Κοντός) and a crew of sponge divers from Symi island discovered the Antikythera shipwreck during the spring of 1900, and recovered artefacts during the first expedition with the Hellenic Royal Navy, in 1900–01.[27] This wreck of a Roman cargo ship was found at a depth of 45 metres (148 ft) off Point Glyphadia on the Greek island of Antikythera. The team retrieved numerous large artefacts, including bronze and marble statues, pottery, unique glassware, jewellery, coins, and the mechanism. The mechanism was retrieved from the wreckage in 1901, most probably in July of that year.[28] It is not known how the mechanism came to be on the cargo ship, but it has been suggested that it was being taken from Rhodes to Rome, together with other looted treasure, to support a triumphal parade being staged by Julius Caesar.[29]

All of the items retrieved from the wreckage were transferred to the National Museum of Archaeology in Athens for storage and analysis. The mechanism appeared at the time to be little more than a lump of corroded bronze and wood; it went unnoticed for two years, while museum staff worked on piecing together more obvious treasures, such as the statues.[23]

On 17 May 1902, archaeologist Valerios Stais found that one of the pieces of rock had a gear wheel embedded in it. He initially believed that it was an astronomical clock, but most scholars considered the device to be prochronistic, too complex to have been constructed during the same period as the other pieces that had been discovered. Investigations into the object were dropped until British science historian and Yale University professor Derek J. de Solla Price became interested in it in 1951.[30] In 1971, Price and Greek nuclear physicist Charalampos Karakalos made X-ray and gamma-ray images of the 82 fragments. Price published an extensive 70-page paper on their findings in 1974.[31]

Two other searches for items at the Antikythera wreck site in 2012 and 2015 have yielded a number of fascinating art objects and a second ship which may or may not be connected with the treasure ship on which the Mechanism was found.[32] Also found was a bronze disc, embellished with the image of a bull. The disc has four "ears" which have holes in them, and it was thought by some that it may have been part of the Antikythera Mechanism itself, as a "cog wheel". However, there appears to be little evidence that it was part of the Mechanism; it is more likely that the disc was a bronze decoration on a piece of furniture.[33]

Origin

The Antikythera mechanism is generally referred to as the first known analogue computer.[34] The quality and complexity of the mechanism's manufacture suggests that it must have had undiscovered predecessors made during the Hellenistic period.[35] Its construction relied on theories of astronomy and mathematics developed by Greek astronomers during the second century BC, and it is estimated to have been built in the late second century BC[5] or the early first century BC.[36]

In 1974, Derek de Solla Price concluded from gear settings and inscriptions on the mechanism's faces that it was made about 87 BC and lost only a few years later.[13] Jacques Cousteau and associates visited the wreck in 1976 and recovered coins dated between 76 and 67 BC.[37][38] The mechanism's advanced state of corrosion has made it impossible to perform an accurate compositional analysis, but it is believed that the device was made of a low-tin bronze alloy (of approximately 95% copper, 5% tin).[39] Its instructions were composed in Koine Greek.[6]

In 2008, continued research by the Antikythera Mechanism Research Project suggested that the concept for the mechanism may have originated in the colonies of Corinth, since they identified the calendar on the Metonic Spiral as coming from Corinth or one of its colonies in northwest Greece or Sicily.[40] Syracuse was a colony of Corinth and the home of Archimedes, and the Antikythera Mechanism Research project argued in 2008 that it might imply a connection with the school of Archimedes.[8] However, it was demonstrated in 2017 that the calendar on the Metonic Spiral is indeed of the Corinthian type but cannot be that of Syracuse.[41] Another theory suggests that coins found by Jacques Cousteau at the wreck site in the 1970s date to the time of the device's construction, and posits that its origin may have been from the ancient Greek city of Pergamon,[42] home of the Library of Pergamum. With its many scrolls of art and science, it was second in importance only to the Library of Alexandria during the Hellenistic period.[43]

The ship carrying the device also contained vases in the Rhodian style, leading to a hypothesis that it was constructed at an academy founded by Stoic philosopher Posidonius on that Greek island.[44] Rhodes was a busy trading port in antiquity and a centre of astronomy and mechanical engineering, home to astronomer Hipparchus who was active from about 140 BC to 120 BC. The mechanism uses Hipparchus's theory for the motion of the Moon, which suggests the possibility that he may have designed it or at least worked on it.[23] In addition, it has recently been argued that the astronomical events on the Parapegma of the Antikythera Mechanism work best for latitudes in the range of 33.3–37.0 degrees north;[45] the island of Rhodes is located between the latitudes of 35.85 and 36.50 degrees north.

In 2014, a study by Carman and Evans argued for a new dating of approximately 200 BC based on identifying the start-up date on the Saros Dial as the astronomical lunar month that began shortly after the new moon of 28 April 205 BC.[15][16] Moreover, according to Carman and Evans, the Babylonian arithmetic style of prediction fits much better with the device's predictive models than the traditional Greek trigonometric style.[15] A study by Paul Iversen published in 2017 reasons that the prototype for the device was indeed from Rhodes, but that this particular model was modified for a client from Epirus in northwestern Greece; Iversen argues that it was probably constructed no earlier than a generation before the shipwreck, a date supported also by Jones.[46]

Further dives were undertaken in 2014, with plans to continue in 2015, in the hope of discovering more of the mechanism.[16] A five-year programme of investigations began in 2014 and ended in October 2019, with a new five-year session starting in May 2020.[47][48]

Description

The original mechanism apparently came out of the Mediterranean as a single encrusted piece. Soon afterward it fractured into three major pieces. Other small pieces have broken off in the interim from cleaning and handling,[49] and still others were found on the sea floor by the Cousteau expedition. Other fragments may still be in storage, undiscovered since their initial recovery; Fragment F came to light in that way in 2005. Of the 82 known fragments, seven are mechanically significant and contain the majority of the mechanism and inscriptions. There are also 16 smaller parts that contain fractional and incomplete inscriptions.[5][8][50]

Major fragments
Fragment Size [mm] Weight [g] Gears Inscriptions Notes
A180 × 150369.127Yes The main fragment contains the majority of the known mechanism. Clearly visible on the front is the large b1 gear, and under closer inspection further gears behind said gear (parts of the l, m, c, and d trains are clearly visible as gears to the naked eye). The crank mechanism socket and the side-mounted gear that meshes with b1 is on Fragment A. The back of the fragment contains the rearmost e and k gears for synthesis of the moon anomaly, noticeable also is the pin and slot mechanism of the k train. It is noticed from detailed scans of the fragment that all gears are very closely packed and have sustained damage and displacement due to their years in the sea. The fragment is approximately 30 mm thick at its thickest point.

Fragment A also contains divisions of the upper left quarter of the Saros spiral and 14 inscriptions from said spiral. The fragment also contains inscriptions for the Exeligmos dial and visible on the back surface the remnants of the dial face. Finally, this fragment contains some back door inscriptions.

B125 × 6099.41Yes Contains approximately the bottom right third of the Metonic spiral and inscriptions of both the spiral and back door of the mechanism. The Metonic scale would have consisted of 235 cells of which 49 have been deciphered from fragment B either in whole or partially. The rest so far are assumed from knowledge of the Metonic cycle. This fragment also contains a single gear (o1) used in the Olympic train.
C120 × 11063.81Yes Contains parts of the upper right of the front dial face showing calendar and zodiac inscriptions. This fragment also contains the Moon indicator dial assembly including the Moon phase sphere in its housing and a single bevel gear (ma1) used in the Moon phase indication system.
D45 × 3515.01 Contains at least one unknown gear and according to Michael T. Wright possibly two. Their purpose and position has not been ascertained to any accuracy or consensus, but lends to the debate for the possible planet displays on the face of the mechanism.
E60 × 3522.1Yes Found in 1976 and contains six inscriptions from the upper right of the Saros spiral.
F90 × 8086.2Yes Found in 2005 and contains 16 inscriptions from the lower right of the Saros spiral. It also contains remnants of the mechanism's wooden housing.
G125 × 11031.7Yes A combination of fragments taken from fragment C while cleaning.

Minor fragments

Many of the smaller fragments that have been found contain nothing of apparent value; however, a few have some inscriptions on them. Fragment 19 contains significant back door inscriptions including one reading "... 76 years ..." which refers to the Callippic cycle. Other inscriptions seem to describe the function of the back dials. In addition to this important minor fragment, 15 further minor fragments have remnants of inscriptions on them.[21]:7

Mechanism
Schematic of the artefact's known mechanism

Information on the specific data gleaned from the ruins by the latest inquiries is detailed in the supplement to Freeth's 2006 Nature article.[5]

Operation

On the front face of the mechanism there is a fixed ring dial representing the ecliptic, the twelve zodiacal signs marked off with equal 30-degree sectors. This matched with the Babylonian custom of assigning one twelfth of the ecliptic to each zodiac sign equally, even though the constellation boundaries were variable. Outside that dial is another ring which is rotatable, marked off with the months and days of the Sothic Egyptian calendar, twelve months of 30 days plus five intercalary days. The months are marked with the Egyptian names for the months transcribed into the Greek alphabet. The first task, then, is to rotate the Egyptian calendar ring to match the current zodiac points. The Egyptian calendar ignored leap days, so it advanced through a full zodiac sign in about 120 years.[6]

The mechanism was operated by turning a small hand crank (now lost) which was linked via a crown gear to the largest gear, the four-spoked gear visible on the front of fragment A, the gear named b1. This moved the date pointer on the front dial, which would be set to the correct Egyptian calendar day. The year is not selectable, so it is necessary to know the year currently set, or by looking up the cycles indicated by the various calendar cycle indicators on the back in the Babylonian ephemeris tables for the day of the year currently set, since most of the calendar cycles are not synchronous with the year. The crank moves the date pointer about 78 days per full rotation, so hitting a particular day on the dial would be easily possible if the mechanism were in good working condition. The action of turning the hand crank would also cause all interlocked gears within the mechanism to rotate, resulting in the simultaneous calculation of the position of the Sun and Moon, the moon phase, eclipse, and calendar cycles, and perhaps the locations of planets.[51]

The operator also had to be aware of the position of the spiral dial pointers on the two large dials on the back. The pointer had a "follower" that tracked the spiral incisions in the metal as the dials incorporated four and five full rotations of the pointers. When a pointer reached the terminal month location at either end of the spiral, the pointer's follower had to be manually moved to the other end of the spiral before proceeding further.[5]:10

Faces
Computer-generated front panel of the Freeth model

Front face

The front dial has two concentric circular scales that represent the path of the ecliptic through the heavens. The outer ring is marked off with the days of the 365-day Egyptian civil calendar. On the inner ring, a second dial marks the Greek signs of the Zodiac, with division into degrees. The mechanism predates the Julian calendar reform, but the Sothic and Callippic cycles had already pointed to a ​365 1⁄4-day solar year, as seen in Ptolemy III's abortive calendrical reform of 238 BC. The dials are not believed to reflect his proposed leap day (Epag. 6), but the outer calendar dial may be moved against the inner dial to compensate for the effect of the extra quarter-day in the solar year by turning the scale backward one day every four years.

The position of the Sun on the ecliptic corresponds to the current date in the year. The orbits of the Moon and the five planets known to the Greeks are close enough to the ecliptic to make it a convenient reference for defining their positions as well.

The following three Egyptian months are inscribed in Greek letters on the surviving pieces of the outer ring:[52]

  • ΠΑΧΩΝ (Pachon)
  • ΠΑΥΝΙ (Payni)
  • ΕΠΙΦΙ (Epiphi)

The other months have been reconstructed, although some reconstructions of the mechanism omit the five days of the Egyptian intercalary month. The Zodiac dial contains Greek inscriptions of the members of the zodiac, which is believed to be adapted to the tropical month version rather than the sidereal:[21]:8

Front panel of a 2007 recreation
  • ΚΡΙΟΣ (Krios [Ram], Aries)
  • ΤΑΥΡΟΣ (Tauros [Bull], Taurus)
  • ΔΙΔΥΜΟΙ (Didymoi [Twins], Gemini)
  • ΚΑΡΚΙΝΟΣ (Karkinos [Crab], Cancer)
  • ΛΕΩΝ (Leon [Lion], Leo)
  • ΠΑΡΘΕΝΟΣ (Parthenos [Maiden], Virgo)
  • ΧΗΛΑΙ (Chelai [Scorpio's Claw or Zygos], Libra)
  • ΣΚΟΡΠΙΟΣ (Skorpios [Scorpion], Scorpio)
  • ΤΟΞΟΤΗΣ (Toxotes [Archer], Sagittarius)
  • ΑΙΓΟΚΕΡΩΣ (Aigokeros [Goat-horned], Capricorn)
  • ΥΔΡΟΧΟΟΣ (Hydrokhoos [Water carrier], Aquarius)
  • ΙΧΘΥΕΣ (Ichthyes [Fishes], Pisces)

Also on the zodiac dial are a number of single characters at specific points (see reconstruction here:[53]). They are keyed to a parapegma, a precursor of the modern day almanac inscribed on the front face above and beneath the dials. They mark the locations of longitudes on the ecliptic for specific stars. The parapegma above the dials reads (square brackets indicate inferred text):

ΑΑΙΓΟΚΕΡΩΣ ΑΡΧΕΤΑΙ ΑΝΑΤΕΛΛΕΙΝ [...] ΑCapricorn begins to riseΙΚΡΙΟΣ ΑΡΧΕΤΑΙ ΕΠΙΤΕΛΛΕΙΝ [...] ΑAries begins to rise
ΤΡΟΠΑΙ ΧΕΙΜΕΡΙΝΑΙ [...] ΑWinter solsticeΙΣΗΜΕΡΙΑ ΕΑΡΙΝΗ [...] ΑVernal equinox
Β[...] ΕΙ ΕΣΠΕΡΙ... eveningΚ[...] ΕΣΠΕΡΙΑ [...] ΙΑ... evening
Γ[...] ΙΕΣΠΕΡΙ... eveningΛΥΑΔΕΣ ΔΥΝΟΥΣΙΝ ΕΣΠΕΡΙΑΙ [...] ΚΑThe Hyades set in the evening
Δ[...] ΥΔΡΟΧΟΟΣ ΑΡΧΕΤΑΙ ΕΠΙΤΕΛΛΕΙΝΑAquarius begins to riseΜΤΑΥΡΟΣ ΑΡΧΕΤΑΙ Ε{Π}ΙΤΕΛΛΕΙΝΑTaurus begins to rise
Ε[...] ΕΣΠΕΡΙΟΣ [...] Ι{Ο}... eveningΝΛΥΡΑ ΕΠΙΤΕΛΛΕΙ ΕΣΠΕΡΙΛ [...] ΔLyra rises in the evening
Ζ[...] ΡΙΑΙ [...] Κ... {evening}ΞΠΛΕΙΑΣ ΕΠΙΤΕΛΛΕΙ ΕΩΙΑ [...] ΙThe Pleiades rise in the morning
ΗΙΧΘΥΕΣ ΑΡΧΟΝΤΑΙ ΕΠΙΤΕΛΛΕΙΝ [...] ΑPisces begins to riseΟΥΑΣ ΕΠΙΤΕΛΛΕΙ ΕΩΙΑ [...] ΔThe Hyades rise in the morning
Θ[...] {Ι}ΑΠΔΙΔΥΜΟΙ ΑΡΧΟΝΤΑ ΕΠΙΤΕΛΛΕΙΝ [...] ΑGemini begins to rise
ΡΑΕΤΟΣ ΕΠΙΤΕΛΛΕΙ ΕΣΠΕΡΙΟΣAltair rises in the evening
ΣΑΡΚΤΟΥΡΟΣ ΔΥΝΕΙ Ε{Ω}{Ι}ΟΣArcturus sets in the morning

The parapegma beneath the dials reads:

ΑΧΗΛΑΙ ΑΡΧΟΝΤΑ ΕΠΙΤΕΛΛΕΙΝ [...] ΑLibra begins to riseΜΚΑΡΚΙΝΟΣ ΑΡΧΕΤΑΙ [...] ΑCancer begins {to rise}
ΣΗΜΕΡΙΑ ΦΟΙΝΟΠΩΡΙΝΗ [...] ΑAutumnal equinoxΤΡΟΠΑΙ ΘΕΡΙΝΑΙ [...] ΑSummer solstice
Β[...] ΑΝΑΤΕΛΛΟΥΣΙΝ ΕΣΠΕΡΙΟΙΙΑ... rise in the eveningΝΩΡΙΩΝ ΑΝΤΕΛΛΕΙ ΕΩΙΟΣOrion precedes the morning
Γ[...] ΑΝΑΤΕΛΛΕΙ ΕΣΠΕΡΙΑΙΔ... rise in the eveningΞ{Κ}ΥΩΝ ΑΝΤΕΛΛΕΙ ΕΩΙΟΣCanis Major precedes the morning
Δ[...] ΤΕΛΛΕΙΙ{Ο}... riseΟΑΕΤΟΣ ΔΥΝΕΙ ΕΩΙΟΣAltair sets in the morning
ΕΣΚΟΡΠΙΟΣ ΑΡΧΕΤΑΙ ΑΝΑΤΕΛΛΕΙΝΑScorpio begins to riseΠΛΕΩΝ ΑΡΧΕΤΑΙ ΕΠΙΤΕΛΛΕΙΝ [...] ΑLeo begins to rise
Ζ[...]Ρ[...]
Η[...]Σ[...]
Θ[...]Τ[...]
ΙΤΟΞΟΤΗΣ ΑΡΧΕΤΑΙ ΕΠΙΤΕΛΛΕΙΝ [...] ΑSagittarius begins to riseΥ[...]
Κ[...]Φ[...]
Λ[...]Χ[...]

At least two pointers indicated positions of bodies upon the ecliptic. A lunar pointer indicated the position of the Moon, and a mean Sun pointer also was shown, perhaps doubling as the current date pointer. The Moon position was not a simple mean Moon indicator that would indicate movement uniformly around a circular orbit; it approximated the acceleration and deceleration of the Moon's elliptical orbit, through the earliest extant use of epicyclic gearing.

It also tracked the precession of the elliptical orbit around the ecliptic in an 8.88-year cycle. The mean Sun position is, by definition, the current date. It is speculated that since such pains were taken to get the position of the Moon correct,[21]:20, 24 then there also was likely to have been a "true sun" pointer in addition to the mean Sun pointer likewise, to track the elliptical anomaly of the Sun (the orbit of Earth around the Sun), but there is no evidence of it among the ruins of the mechanism found to date.[6] Similarly, neither is there the evidence of planetary orbit pointers for the five planets known to the Greeks among the ruins. See Proposed planet indication gearing schemes below.

Mechanical engineer Michael Wright demonstrated that there was a mechanism to supply the lunar phase in addition to the position.[54] The indicator was a small ball embedded in the lunar pointer, half-white and half-black, which rotated to show the phase (new, first quarter, half, third quarter, full, and back) graphically. The data to support this function is available given the Sun and Moon positions as angular rotations; essentially, it is the angle between the two, translated into the rotation of the ball. It requires a differential gear, a gearing arrangement that sums or differences two angular inputs.

Rear face
Computer-generated back panel

In July 2008, scientists reported new findings in the journal Nature showing that the mechanism not only tracked the Metonic calendar and predicted solar eclipses, but also calculated the timing of several panhellenic athletic games, including the Ancient Olympic Games.[8] Inscriptions on the instrument closely match the names of the months that are used on calendars from Epirus in northwestern Greece and with the island of Corfu, which in antiquity was known as Corcyra.[55][56][57]

On the back of the mechanism, there are five dials: the two large displays, the Metonic and the Saros, and three smaller indicators, the so-called Olympiad Dial,[8] which has recently been renamed the Games dial as it did not track Olympiad years (the four-year cycle it tracks most closely is the Halieiad),[10] the Callippic, and the Exeligmos.[5]:11

The Metonic Dial is the main upper dial on the rear of the mechanism. The Metonic cycle, defined in several physical units, is 235 synodic months, which is very close (to within less than 13 one-millionths) to 19 tropical years. It is therefore a convenient interval over which to convert between lunar and solar calendars. The Metonic dial covers 235 months in five rotations of the dial, following a spiral track with a follower on the pointer that keeps track of the layer of the spiral. The pointer points to the synodic month, counted from new moon to new moon, and the cell contains the Corinthian month names.[8][58][59]

  1. ΦΟΙΝΙΚΑΙΟΣ (Phoinikaios)
  2. ΚΡΑΝΕΙΟΣ (Kraneios)
  3. ΛΑΝΟΤΡΟΠΙΟΣ (Lanotropios)
  4. ΜΑΧΑΝΕΥΣ (Machaneus, "mechanic", referring to Zeus the inventor)
  5. ΔΩΔΕΚΑΤΕΥΣ (Dodekateus)
  6. ΕΥΚΛΕΙΟΣ (Eukleios)
  7. ΑΡΤΕΜΙΣΙΟΣ (Artemisios)
  8. ΨΥΔΡΕΥΣ (Psydreus)
  9. ΓΑΜΕΙΛΙΟΣ (Gameilios)
  10. ΑΓΡΙΑΝΙΟΣ (Agrianios)
  11. ΠΑΝΑΜΟΣ (Panamos)
  12. ΑΠΕΛΛΑΙΟΣ (Apellaios)

Thus, setting the correct solar time (in days) on the front panel indicates the current lunar month on the back panel, with resolution to within a week or so.

Based on the fact that the calendar month names are consistent with all the evidence of the Epirote calendar and that the Games dial mentions the very minor Naa games of Dodona (in Epirus), it has recently been argued that the calendar on the Antikythera Mechanism is likely to be the Epirote calendar, and that this calendar was probably adopted from a Corinthian colony in Epirus, possibly Ambracia.[59] It has also been argued that the first month of the calendar, Phoinikaios, was ideally the month in which the autumn equinox fell, and that the start-up date of the calendar began shortly after the astronomical new moon of 23 August 205 BC.[60]

The Callippic dial is the left secondary upper dial, which follows a 76-year cycle. The Callippic cycle is four Metonic cycles, and so this dial indicates the current Metonic cycle in the overall Callippic cycle.

The Games dial is the right secondary upper dial; it is the only pointer on the instrument that travels in a counter-clockwise direction as time advances. The dial is divided into four sectors, each of which is inscribed with a year indicator and the name of two Panhellenic Games: the "crown" games of Isthmia, Olympia, Nemea, and Pythia; and two lesser games: Naa (held at Dodona),[61] and the sixth and final set of Games recently deciphered as the Halieia of Rhodes.[62] The inscriptions on each one of the four divisions are:[5][8]

Olympic dial
Year of the cycle Inside the dial inscription Outside the dial inscription
1 LΑ ΙΣΘΜΙΑ (Isthmia)
ΟΛΥΜΠΙΑ (Olympia)
2 LΒ ΝΕΜΕΑ (Nemea)
NAA (Naa)
3 LΓ ΙΣΘΜΙΑ (Isthmia)
ΠΥΘΙΑ (Pythia)
4 LΔ ΝΕΜΕΑ (Nemea)
ΑΛΙΕΙΑ (Halieia)

The Saros dial is the main lower spiral dial on the rear of the mechanism.[5]:4–5, 10 The Saros cycle is 18 years and ​11 1⁄3 days long (6585.333... days), which is very close to 223 synodic months (6585.3211 days). It is defined as the cycle of repetition of the positions required to cause solar and lunar eclipses, and therefore, it could be used to predict them—not only the month, but the day and time of day. Note that the cycle is approximately 8 hours longer than an integer number of days. Translated into global spin, that means an eclipse occurs not only eight hours later, but one-third of a rotation farther to the west. Glyphs in 51 of the 223 synodic month cells of the dial specify the occurrence of 38 lunar and 27 solar eclipses. Some of the abbreviations in the glyphs read:

  • Σ = ΣΕΛΗΝΗ ("Selene", Moon)
  • Η = ΗΛΙΟΣ ("Helios", Sun)
  • H\M = ΗΜΕΡΑΣ ("Hemeras", of the day)
  • ω\ρ = ωρα ("hora", hour)
  • N\Y = ΝΥΚΤΟΣ ("Nuktos", of the night)

The glyphs show whether the designated eclipse is solar or lunar, and give the day of the month and hour. Solar eclipses may not be visible at any given point, and lunar eclipses are visible only if the moon is above the horizon at the appointed hour.[21]:6 In addition, the inner lines at the cardinal points of the Saros dial indicate the start of a new full moon cycle. Based on the distribution of the times of the eclipses, it has recently been argued that the start-up date of the Saros dial was shortly after the astronomical new moon of 28 April 205 BC.[63]

The Exeligmos Dial is the secondary lower dial on the rear of the mechanism. The Exeligmos cycle is a 54-year triple Saros cycle that is 19,756 days long. Since the length of the Saros cycle is to a third of a day (eight hours), so a full Exeligmos cycle returns counting to integer days, hence the inscriptions. The labels on its three divisions are:[5]:10

  • Blank or o ? (representing the number zero, assumed, not yet observed)
  • H (number 8) means add 8 hours to the time mentioned in the display
  • Iϛ (number 16) means add 16 hours to the time mentioned in the display

Thus the dial pointer indicates how many hours must be added to the glyph times of the Saros dial in order to calculate the exact eclipse times.

Doors

The mechanism has a wooden casing with a front and a back door, both containing inscriptions.[8][21] The back door appears to be the "instruction manual". On one of its fragments is written "76 years, 19 years" representing the Callippic and Metonic cycles. Also written is "223" for the Saros cycle. On another one of its fragments, it is written "on the spiral subdivisions 235" referring to the Metonic dial.

Gearing

The mechanism is remarkable for the level of miniaturisation and the complexity of its parts, which is comparable to that of fourteenth-century astronomical clocks. It has at least 30 gears, although mechanism expert Michael Wright has suggested that the Greeks of this period were capable of implementing a system with many more gears.[51]

There is much debate as to whether the mechanism had indicators for all five of the planets known to the ancient Greeks. No gearing for such a planetary display survives and all gears are accounted for—with the exception of one 63-toothed gear (r1) otherwise unaccounted for in fragment D.[6]

The purpose of the front face was to position astronomical bodies with respect to the celestial sphere along the ecliptic, in reference to the observer's position on the Earth. That is irrelevant to the question of whether that position was computed using a heliocentric or geocentric view of the Solar System; either computational method should, and does, result in the same position (ignoring ellipticity), within the error factors of the mechanism.

The epicyclic Solar System of Ptolemy (c. AD 100–170)—still 300 years in the future from the apparent date of the mechanism—carried forward with more epicycles, and was more accurate predicting the positions of planets than the view of Copernicus (1473–1543), until Kepler (1571–1630) introduced the possibility that orbits are ellipses.[64]

Evans et al. suggest that to display the mean positions of the five classical planets would require only 17 further gears that could be positioned in front of the large driving gear and indicated using individual circular dials on the face.[65]

Tony Freeth and Alexander Jones have modelled and published details of a version using several gear trains mechanically-similar to the lunar anomaly system allowing for indication of the positions of the planets as well as synthesis of the Sun anomaly. Their system, they claim, is more authentic than Wright's model as it uses the known skill sets of the Greeks of that period and does not add excessive complexity or internal stresses to the machine.[6]

The gear teeth were in the form of equilateral triangles with an average circular pitch of 1.6 mm, an average wheel thickness of 1.4 mm and an average air gap between gears of 1.2 mm. The teeth probably were created from a blank bronze round using hand tools; this is evident because not all of them are even.[6] Due to advances in imaging and X-ray technology it is now possible to know the precise number of teeth and size of the gears within the located fragments. Thus the basic operation of the device is no longer a mystery and has been replicated accurately. The major unknown remains the question of the presence and nature of any planet indicators.[21]:8

A table of the gears, their teeth, and the expected and computed rotations of various important gears follows. The gear functions come from Freeth et al. (2008)[8] and those for the lower half of the table from Freeth and Jones 2012.[6] The computed values start with 1 year/revolution for the b1 gear, and the remainder are computed directly from gear teeth ratios. The gears marked with an asterisk (*) are missing, or have predecessors missing, from the known mechanism; these gears have been calculated with reasonable gear teeth counts.[8][21]

The Antikythera Mechanism: known gears and accuracy of computation
Gear name[table 1] Function of the gear/pointer Expected simulated interval of a full circular revolution Mechanism formula[table 2] Computed interval Gear direction[table 3]
x Year gear 1 tropical year 1 (by definition) 1 year (presumed) cw[table 4]
b the Moon's orbit 1 sidereal month (27.321661 days) Time(b) = Time(x) * (c1 / b2) * (d1 / c2) * (e2 / d2) * (k1 / e5) * (e6 / k2) * (b3 / e1) 27.321 days[table 5] cw
r lunar phase display 1 synodic month (29.530589 days) Time(r) = 1 / (1 / Time(b2 [mean sun] or sun3 [true sun])) – (1 / Time(b))) 29.530 days[table 5]
n* Metonic pointer Metonic cycle () / 5 spirals around the dial = 1387.94 days Time(n) = Time(x) * (l1 / b2) * (m1 /l2) * (n1 / m2) 1387.9 days ccw[table 6]
o* Games dial pointer 4 years Time(o) = Time(n) * (o1 / n2) 4.00 years cw[table 6][table 7]
q* Callippic pointer 27758.8 days Time(q) = Time(n) * (p1 / n3) * (q1 /p2) 27758 days ccw[table 6]
e* lunar orbit precession 8.85 years Time(e) = Time(x) * (l1 / b2) * (m1 / l2) * (e3 / m3) 8.8826 years ccw[table 8]
g* Saros cycle Saros time / 4 turns = 1646.33 days Time(g) = Time(e) * (f1 / e4) * (g1 / f2) 1646.3 days ccw[table 6]
i* Exeligmos pointer 19755.8 days Time(i) = Time(g) * (h1 / g2) * (i1 / h2) 19756 days ccw[table 6]
The following are proposed gearing from the 2012 Freeth and Jones reconstruction:
sun3* True sun pointer 1 mean year Time(sun3) = Time(x) * (sun3 / sun1) * (sun2 / sun3) 1 mean year[table 5] cw[table 9]
mer2* Mercury pointer 115.88 days (synodic period) Time(mer2) = Time(x) * (mer2 / mer1) 115.89 days[table 5] cw[table 9]
ven2* Venus pointer 583.93 days (synodic period) Time(ven2) = Time(x) * (ven1 / sun1) 584.39 days[table 5] cw[table 9]
mars4* Mars pointer 779.96 days (synodic period) Time(mars4) = Time(x) * (mars2 / mars1) * (mars4 / mars3) 779.84 days[table 5] cw[table 9]
jup4* Jupiter pointer 398.88 days (synodic period) Time(jup4) = Time(x) * (jup2 / jup1) * (jup4 / jup3) 398.88 days[table 5] cw[table 9]
sat4* Saturn pointer 378.09 days (synodic period) Time(sat4) = Time(x) * (sat2 / sat1) * (sat4 / sat3) 378.06 days[table 5] cw[table 9]

Table notes:

  1. Change from traditional naming: X is the main year axis, turns once per year with gear B1. The B axis is the axis with gears B3 and B6, while the E axis is the axis with gears E3 and E4. Other axes on E (E1/E6 and E2/E5) are irrelevant to this table.
  2. "Time" is the interval represented by one complete revolution of the gear.
  3. As viewed from the front of the Mechanism. The "natural" view is viewing the side of the Mechanism the dial/pointer in question is actually displayed on.
  4. The Greeks, being in the northern hemisphere, assumed proper daily motion of the stars was from east to west, ccw when the ecliptic and zodiac is viewed to the south. As viewed on the front of the Mechanism.
  5. On average, due to epicyclic gearing causing accelerations and decelerations.
  6. Being on the reverse side of the box, the "natural" rotation is the opposite
  7. This was the only visual pointer naturally travelling in the counter-clockwise direction.
  8. Internal and not visible.
  9. Prograde motion; retrograde is obviously the opposite direction.

There are several gear ratios for each planet that result in close matches to the correct values for synodic periods of the planets and the Sun. The ones chosen above seem to provide good accuracy with reasonable tooth counts, but the specific gears that may have been used are, and probably will remain, unknown.[6]

Known gear scheme
A hypothetical schematic representation of the gearing of the Antikythera Mechanism, including the 2012 published interpretation of existing gearing, gearing added to complete known functions, and proposed gearing to accomplish additional functions, namely true sun pointer and pointers for the five then-known planets, as proposed by Freeth and Jones, 2012.[6] Based also upon similar drawing in the Freeth 2006 Supplement[21] and Wright 2005, Epicycles Part 2.[66] Proposed (as opposed to known from the artefact) gearing crosshatched.

It is very probable that there were planetary dials, as the complicated motions and periodicities of all planets are mentioned in the manual of the mechanism. The exact position and mechanisms for the gears of the planets is not known. There is no coaxial system but only for the Moon. Fragment D that is an epicycloidal system is considered as a planetary gear for Jupiter (Moussas, 2011, 2012, 2014) or a gear for the motion of the Sun (University of Thessaloniki group). The Sun gear is operated from the hand-operated crank (connected to gear a1, driving the large four-spoked mean Sun gear, b1) and in turn drives the rest of the gear sets. The Sun gear is b1/b2 and b2 has 64 teeth. It directly drives the date/mean sun pointer (there may have been a second, "true sun" pointer that displayed the Sun's elliptical anomaly; it is discussed below in the Freeth reconstruction). In this discussion, reference is to modelled rotational period of various pointers and indicators; they all assume the input rotation of the b1 gear of 360 degrees, corresponding with one tropical year, and are computed solely on the basis of the gear ratios of the gears named.[5][8][67]

The Moon train starts with gear b1 and proceeds through c1, c2, d1, d2, e2, e5, k1, k2, e6, e1, and b3 to the Moon pointer on the front face. The gears k1 and k2 form an epicyclic gear system; they are an identical pair of gears that don't mesh, but rather, they operate face-to-face, with a short pin on k1 inserted into a slot in k2. The two gears have different centres of rotation, so the pin must move back and forth in the slot. That increases and decreases the radius at which k2 is driven, also necessarily varying its angular velocity (presuming the velocity of k1 is even) faster in some parts of the rotation than others. Over an entire revolution the average velocities are the same, but the fast-slow variation models the effects of the elliptical orbit of the Moon, in consequence of Kepler's second and third laws. The modelled rotational period of the Moon pointer (averaged over a year) is 27.321 days, compared to the modern length of a lunar sidereal month of 27.321661 days. As mentioned, the pin/slot driving of the k1/k2 gears varies the displacement over a year's time, and the mounting of those two gears on the e3 gear supplies a precessional advancement to the ellipticity modelling with a period of 8.8826 years, compared with the current value of precession period of the moon of 8.85 years.[5][8][67]

The system also models the phases of the Moon. The Moon pointer holds a shaft along its length, on which is mounted a small gear named r, which meshes to the Sun pointer at B0 (the connection between B0 and the rest of B is not visible in the original mechanism, so whether b0 is the current date/mean Sun pointer or a hypothetical true Sun pointer is not known). The gear rides around the dial with the Moon, but is also geared to the Sun—the effect is to perform a differential gear operation, so the gear turns at the synodic month period, measuring in effect, the angle of the difference between the Sun and Moon pointers. The gear drives a small ball that appears through an opening in the Moon pointer's face, painted longitudinally half white and half black, displaying the phases pictorially. It turns with a modelled rotational period of 29.53 days; the modern value for the synodic month is 29.530589 days.[5][8][67]

The Metonic train is driven by the drive train b1, b2, l1, l2, m1, m2, and n1, which is connected to the pointer. The modelled rotational period of the pointer is the length of the 6939.5 days (over the whole five-rotation spiral), while the modern value for the Metonic cycle is 6939.69 days.[5][8][67]

The Olympiad train is driven by b1, b2, l1, l2, m1, m2, n1, n2, and o1, which mounts the pointer. It has a computed modelled rotational period of exactly four years, as expected. Incidentally, it is the only pointer on the mechanism that rotates counter-clockwise; all of the others rotate clockwise.[5][8][67]

The Callippic train is driven by b1, b2, l1, l2, m1, m2, n1, n3, p1, p2, and q1, which mounts the pointer. It has a computed modelled rotational period of 27758 days, while the modern value is 27758.8 days.[5][8][67]

The Saros train is driven by b1, b2, l1, l2, m1, m3, e3, e4, f1, f2, and g1, which mounts the pointer. The modelled rotational period of the Saros pointer is 1646.3 days (in four rotations along the spiral pointer track); the modern value is 1646.33 days.[5][8][67]

The Exeligmos train is driven by b1, b2, l1, l2, m1, m3, e3, e4, f1, f2, g1, g2, h1, h2, and i1, which mounts the pointer. The modelled rotational period of the Exeligmos pointer is 19,756 days; the modern value is 19755.96 days.[5][8][67]

Apparently, gears m3, n1-3, p1-2, and q1 did not survive in the wreckage. The functions of the pointers were deduced from the remains of the dials on the back face, and reasonable, appropriate gearage to fulfill the functions was proposed, and is generally accepted.[5][8][67]

Proposed gear schemes

Because of the large space between the mean Sun gear and the front of the case and the size of and mechanical features on the mean Sun gear it is very likely that the mechanism contained further gearing that either has been lost in or subsequent to the shipwreck or was removed before being loaded onto the ship.[6] This lack of evidence and nature of the front part of the mechanism has led to numerous attempts to emulate what the Greeks of the period would have done and, of course, because of the lack of evidence many solutions have been put forward.

Wright proposal
Evans et al. proposal
Freeth et al. proposal

Michael Wright was the first person to design and build a model with not only the known mechanism, but also, with his emulation of a potential planetarium system. He suggested that along with the lunar anomaly, adjustments would have been made for the deeper, more basic solar anomaly (known as the "first anomaly"). He included pointers for this "true sun", Mercury, Venus, Mars, Jupiter, and Saturn, in addition to the known "mean sun" (current time) and lunar pointers.[6]

Evans, Carman, and Thorndike published a solution with significant differences from Wright's.[65] Their proposal centred on what they observed as irregular spacing of the inscriptions on the front dial face, which to them seemed to indicate an off-centre sun indicator arrangement; this would simplify the mechanism by removing the need to simulate the solar anomaly. They also suggested that rather than accurate planetary indication (rendered impossible by the offset inscriptions) there would be simple dials for each individual planet showing information such as key events in the cycle of planet, initial and final appearances in the night sky, and apparent direction changes. This system would lead to a much simplified gear system, with much reduced forces and complexity, as compared to Wright's model.[65]

Their proposal used simple meshed gear trains and accounted for the previously unexplained 63 toothed gear in fragment D. They proposed two face plate layouts, one with evenly spaced dials, and another with a gap in the top of the face to account for criticism regarding their not using the apparent fixtures on the b1 gear. They proposed that rather than bearings and pillars for gears and axles, they simply held weather and seasonal icons to be displayed through a window.[65]

In a paper published in 2012 Carman, Thorndike, and Evans also proposed a system of epicyclic gearing with pin and slot followers.[68]

Freeth and Jones published their proposal in 2012 after extensive research and work. They came up with a compact and feasible solution to the question of planetary indication. They also propose indicating the solar anomaly (that is, the sun's apparent position in the zodiac dial) on a separate pointer from the date pointer, which indicates the mean position of the Sun, as well as the date on the month dial. If the two dials are synchronised correctly, their front panel display is essentially the same as Wright's. Unlike Wright's model however, this model has not been built physically, and is only a 3-D computer model.[6]

Internal gearing relationships of the Antikythera Mechanism, based on the Freeth and Jones proposal

The system to synthesise the solar anomaly is very similar to that used in Wright's proposal: three gears, one fixed in the centre of the b1 gear and attached to the Sun spindle, the second fixed on one of the spokes (in their proposal the one on the bottom left) acting as an idle gear, and the final positioned next to that one; the final gear is fitted with an offset pin and, over said pin, an arm with a slot that in turn, is attached to the sun spindle, inducing anomaly as the mean Sun wheel turns.[6]

The inferior planet mechanism includes the Sun (treated as a planet in this context), Mercury, and Venus.[6] For each of the three systems there is an epicyclic gear whose axis is mounted on b1, thus the basic frequency is the Earth year (as it is, in truth, for epicyclic motion in the Sun and all the planets—excepting only the Moon). Each meshes with a gear grounded to the mechanism frame. Each has a pin mounted, potentially on an extension of one side of the gear that enlarges the gear, but doesn't interfere with the teeth; in some cases the needed distance between the gear's centre and the pin is farther than the radius of the gear itself. A bar with a slot along its length extends from the pin toward the appropriate coaxial tube, at whose other end is the object pointer, out in front of the front dials. The bars could have been full gears, although there is no need for the waste of metal, since the only working part is the slot. Also, using the bars avoids interference between the three mechanisms, each of which are set on one of the four spokes of b1. Thus there is one new grounded gear (one was identified in the wreckage, and the second is shared by two of the planets), one gear used to reverse the direction of the sun anomaly, three epicyclic gears and three bars/coaxial tubes/pointers, which would qualify as another gear each: five gears and three slotted bars in all.[6]

The superior planet systems—Mars, Jupiter, and Saturn—all follow the same general principle of the lunar anomaly mechanism.[6] Similar to the inferior systems, each has a gear whose centre pivot is on an extension of b1, and which meshes with a grounded gear. It presents a pin and a centre pivot for the epicyclic gear which has a slot for the pin, and which meshes with a gear fixed to a coaxial tube and thence to the pointer. Each of the three mechanisms can fit within a quadrant of the b1 extension, and they are thus all on a single plane parallel with the front dial plate. Each one uses a ground gear, a driving gear, a driven gear, and a gear/coaxial tube/pointer, thus, twelve gears additional in all.

In total, there are eight coaxial spindles of various nested sizes to transfer the rotations in the mechanism to the eight pointers. So in all, there are 30 original gears, seven gears added to complete calendar functionality, 17 gears and three slotted bars to support the six new pointers, for a grand total of 54 gears, three bars, and eight pointers in Freeth and Jones' design.[6]

On the visual representation Freeth supplies in the paper, the pointers on the front zodiac dial have small, round identifying stones. He mentions a quote from an ancient papyrus:

...a voice comes to you speaking. Let the stars be set upon the board in accordance with [their] nature except for the Sun and Moon. And let the Sun be golden, the Moon silver, Kronos [Saturn] of obsidian, Ares [Mars] of reddish onyx, Aphrodite [Venus] lapis lazuli veined with gold, Hermes [Mercury] turquoise; let Zeus [Jupiter] be of (whitish?) stone, crystalline (?)...[69]

Accuracy

Investigations by Freeth and Jones reveal that their simulated mechanism is not particularly accurate, the Mars pointer being up to 38° off at times (these inaccuracies occur at the nodal points of Mars' retrograde motion, and the error recedes at other locations in the orbit). This is not due to inaccuracies in gearing ratios in the mechanism, but rather to inadequacies in the Greek theory of planetary movements. The accuracy could not have been improved until first Ptolemy put forth his Planetary Hypotheses in the second half of the second century AD (particularly adding the concept of the equant to his theory) and then finally by the introduction of Kepler's Second Law in the early 17th century.[6]

In short, the Antikythera Mechanism was a machine designed to predict celestial phenomena according to the sophisticated astronomical theories current in its day, the sole witness to a lost history of brilliant engineering, a conception of pure genius, one of the great wonders of the ancient world—but it didn't really work very well![6]

In addition to theoretical accuracy, there is the matter of mechanical accuracy. Freeth and Jones note that the inevitable "looseness" in the mechanism due to the hand-built gears, with their triangular teeth and the frictions between gears, and in bearing surfaces, probably would have swamped the finer solar and lunar correction mechanisms built into it:

Though the engineering was remarkable for its era, recent research indicates that its design conception exceeded the engineering precision of its manufacture by a wide margin—with considerable cumulative inaccuracies in the gear trains, which would have cancelled out many of the subtle anomalies built into its design.[6][70]

While the device itself may have struggled with inaccuracies due to the triangular teeth being hand-made, the calculations used and the technology implemented to create the elliptical paths of the planets and retrograde motion of the Moon and Mars by using a clockwork-type gear train with the addition of a pin-and-slot epicyclic mechanism predated that of the first known clocks found in antiquity in Medieval Europe by more than 1000 years.[71] Archimedes' development of the approximate value of pi and his theory of centres of gravity along with the steps he made towards developing the calculus[72] all suggest that the Greeks had access to more than enough mathematical knowledge beyond that of just Babylonian algebra in order to be able to model the elliptical nature of planetary motion.

Of special delight to physicists, the Moon mechanism uses a special train of bronze gears, two of them linked with a slightly offset axis, to indicate the position and phase of the moon. As is known today from Kepler's Laws of Planetary Motion, the moon travels at different speeds as it orbits the Earth, and this speed differential is modelled by the Antikythera Mechanism, even though the ancient Greeks were not aware of the actual elliptical shape of the orbit.[73]

Similar devices in ancient literature

Cicero's De re publica, a 1st-century BC philosophical dialogue, mentions two machines that some modern authors consider as some kind of planetarium or orrery, predicting the movements of the Sun, the Moon, and the five planets known at that time. They were both built by Archimedes and brought to Rome by the Roman general Marcus Claudius Marcellus after the death of Archimedes at the siege of Syracuse in 212 BC. Marcellus had great respect for Archimedes and one of these machines was the only item he kept from the siege (the second was placed in the Temple of Virtue). The device was kept as a family heirloom, and Cicero has Philus (one of the participants in a conversation that Cicero imagined had taken place in a villa belonging to Scipio Aemilianus in the year 129 BC) saying that Gaius Sulpicius Gallus (consul with Marcellus's nephew in 166 BC, and credited by Pliny the Elder as the first Roman to have written a book explaining solar and lunar eclipses) gave both a "learned explanation" and a working demonstration of the device.

I had often heard this celestial globe or sphere mentioned on account of the great fame of Archimedes. Its appearance, however, did not seem to me particularly striking. There is another, more elegant in form, and more generally known, moulded by the same Archimedes, and deposited by the same Marcellus, in the Temple of Virtue at Rome. But as soon as Gallus had begun to explain, by his sublime science, the composition of this machine, I felt that the Sicilian geometrician must have possessed a genius superior to any thing we usually conceive to belong to our nature. Gallus assured us, that the solid and compact globe, was a very ancient invention, and that the first model of it had been presented by Thales of Miletus. That afterwards Eudoxus of Cnidus, a disciple of Plato, had traced on its surface the stars that appear in the sky, and that many years subsequent, borrowing from Eudoxus this beautiful design and representation, Aratus had illustrated them in his verses, not by any science of astronomy, but the ornament of poetic description. He added, that the figure of the sphere, which displayed the motions of the Sun and Moon, and the five planets, or wandering stars, could not be represented by the primitive solid globe. And that in this, the invention of Archimedes was admirable, because he had calculated how a single revolution should maintain unequal and diversified progressions in dissimilar motions. When Gallus moved this globe it showed the relationship of the Moon with the Sun, and there were exactly the same number of turns on the bronze device as the number of days in the real globe of the sky. Thus it showed the same eclipse of the Sun as in the globe [of the sky], as well as showing the Moon entering the area of the Earth's shadow when the Sun is in line ... [missing text] [i.e. It showed both solar and lunar eclipses.][74]

Pappus of Alexandria stated that Archimedes had written a now lost manuscript on the construction of these devices entitled On Sphere-Making.[75][76] The surviving texts from ancient times describe many of his creations, some even containing simple drawings. One such device is his odometer, the exact model later used by the Romans to place their mile markers (described by Vitruvius, Heron of Alexandria and in the time of Emperor Commodus).[77] The drawings in the text appeared functional, but attempts to build them as pictured had failed. When the gears pictured, which had square teeth, were replaced with gears of the type in the Antikythera mechanism, which were angled, the device was perfectly functional.[78]

If Cicero's account is correct, then this technology existed as early as the 3rd century BC. Archimedes' device is also mentioned by later Roman era writers such as Lactantius (Divinarum Institutionum Libri VII), Claudian (In sphaeram Archimedes), and Proclus (Commentary on the first book of Euclid's Elements of Geometry) in the 4th and 5th centuries.

Cicero also said that another such device was built "recently" by his friend Posidonius, "... each one of the revolutions of which brings about the same movement in the Sun and Moon and five wandering stars [planets] as is brought about each day and night in the heavens ..."[79]

It is unlikely that any one of these machines was the Antikythera mechanism found in the shipwreck since both the devices fabricated by Archimedes and mentioned by Cicero were located in Rome at least 30 years later than the estimated date of the shipwreck, and the third device was almost certainly in the hands of Posidonius by that date. The scientists who have reconstructed the Antikythera mechanism also agree that it was too sophisticated to have been a unique device.

This evidence that the Antikythera mechanism was not unique adds support to the idea that there was an ancient Greek tradition of complex mechanical technology that was later, at least in part, transmitted to the Byzantine and Islamic worlds, where mechanical devices which were complex, albeit simpler than the Antikythera mechanism, were built during the Middle Ages.[80] Fragments of a geared calendar attached to a sundial, from the 5th or 6th century Byzantine Empire, have been found; the calendar may have been used to assist in telling time.[81] In the Islamic world, Banū Mūsā's Kitab al-Hiyal, or Book of Ingenious Devices, was commissioned by the Caliph of Baghdad in the early 9th century AD. This text described over a hundred mechanical devices, some of which may date back to ancient Greek texts preserved in monasteries. A geared calendar similar to the Byzantine device was described by the scientist al-Biruni around 1000, and a surviving 13th-century astrolabe also contains a similar clockwork device.[81] It is possible that this medieval technology may have been transmitted to Europe and contributed to the development of mechanical clocks there.[23]

On 17 May 2017, Google marked the 115th anniversary of the discovery with a Doodle.[82][83]

As of 2012, the Antikythera mechanism was displayed as part of a temporary exhibition about the Antikythera Shipwreck,[84] accompanied by reconstructions made by Ioannis Theofanidis, Derek de Solla Price, Michael Wright, the Thessaloniki University and Dionysios Kriaris. Other reconstructions are on display at the American Computer Museum in Bozeman, Montana, at the Children's Museum of Manhattan in New York, at Astronomisch-Physikalisches Kabinett in Kassel, Germany, and at the Musée des Arts et Métiers in Paris.

The National Geographic documentary series Naked Science had an episode dedicated to the Antikythera Mechanism entitled "Star Clock BC" that aired on 20 January 2011.[85] A documentary, The World's First Computer, was produced in 2012 by the Antikythera mechanism researcher and film-maker Tony Freeth.[86] In 2012 BBC Four aired The Two-Thousand-Year-Old Computer;[87] it was also aired on 3 April 2013 in the United States on NOVA, the PBS science series, under the name Ancient Computer.[88] It documents the discovery and 2005 investigation of the mechanism by the Antikythera Mechanism Research Project.

A fully functioning Lego reconstruction of the Antikythera mechanism was built in 2010 by hobbyist Andy Carrol, and featured in a short film produced by Small Mammal in 2011.[89] Several exhibitions have been staged worldwide,[90] leading to the main "Antikythera shipwreck" exhibition at the National Archaeological Museum in Athens, Greece.

A fictionalised version of the device was a central plot point in the film Stonehenge Apocalypse (2010), where it was used as the artefact that saved the world from impending doom.[91]

The massively multiplayer video game Eve Online contains an item named "Antikythera Element" obtained from game content surrounding a mysterious group of non-player characters themed as ancient Greeks.[92]

gollark: Have: CB Thunder, 4d17h CB NexusWant: Unbreedable (Cheese/Paper/Chicken/Dino) or red hatchlings or offfersPM me!
gollark: https://dragcave.net/teleport/038c863977a8d85ae16cbcf2c8547238Have: 4G silver tinsel/shimmer arrow thingWant: Any hatchlinng
gollark: ~~trade has vanished mysteriously~~
gollark: https://dragcave.net/teleport/2a52f7240c4bc18d1612a1c5439eb559
gollark: H: CB Black Zyu hatchling, CB Blue Zyu egg.W: CB Yellow ZyuPM me.

See also

References
  1. Efstathiou, Kyriakos; Efstathiou, Marianna (1 September 2018). "Celestial Gearbox: The Oldest Known Computer is a Mechanism Designed to Calculate the Location of the Sun, Moon, and Planets". Mechanical Engineering. 140 (9): 31–35. doi:10.1115/1.2018-SEP1. ISSN 0025-6501.
  2. Ken Steiglitz (5 February 2019). The Discrete Charm of the Machine: Why the World Became Digital. Princeton University Press. p. 108. ISBN 978-0-691-18417-3. The Antkythera Mechanism [The first computer worthy of the name...]
  3. Swedin, Eric G.; Ferro, David L. (24 October 2007). Computers: The Life Story of a Technology. JHU Press. p. 1. ISBN 978-0-8018-8774-1. Retrieved 28 May 2013. It was a mechanical computer for calculating lunar, solar, and stellar calendars.
  4. Paphitis, Nicholas (30 November 2006). "Experts: Fragments an Ancient Computer". Washington Post. Archived from the original on 8 June 2017. Imagine tossing a top-notch laptop into the sea, leaving scientists from a foreign culture to scratch their heads over its corroded remains centuries later. A Roman shipmaster inadvertently did something just like it 2,000 years ago off southern Greece, experts said late Thursday.
  5. Freeth, Tony; Bitsakis, Yanis; Moussas, Xenophon; Seiradakis, John. H.; Tselikas, A.; Mangou, H.; Zafeiropoulou, M.; Hadland, R.; et al. (30 November 2006). "Decoding the ancient Greek astronomical calculator known as the Antikythera Mechanism" (PDF). Nature. 444 (7119): 587–91. Bibcode:2006Natur.444..587F. doi:10.1038/nature05357. PMID 17136087. Archived from the original (PDF) on 20 July 2015. Retrieved 20 May 2014.
  6. Freeth, Tony; Jones, Alexander (2012). "The Cosmos in the Antikythera Mechanism". Institute for the Study of the Ancient World. Retrieved 19 May 2014. Cite journal requires |journal= (help)
  7. Pinotsis, A. D. (30 August 2007). "The Antikythera mechanism: who was its creator and what was its use and purpose?". Astronomical and Astrophysical Transactions. 26 (4–5): 211–26. Bibcode:2007A&AT...26..211P. doi:10.1080/10556790601136925. S2CID 56126896.
  8. Freeth, Tony; Jones, Alexander; Steele, John M.; Bitsakis, Yanis (31 July 2008). "Calendars with Olympiad display and eclipse prediction on the Antikythera Mechanism" (PDF). Nature. 454 (7204): 614–17. Bibcode:2008Natur.454..614F. doi:10.1038/nature07130. PMID 18668103. Archived from the original (PDF) on 27 September 2013. Retrieved 20 May 2014.
  9. Kaplan, Sarah (14 June 2016). "The World's Oldest Computer Is Still Revealing Its Secrets", The Washington Post. Retrieved 16 June 2016.
  10. Paul Iversen, "The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars, Hesperia 86 (2017): 130 and note 4.
  11. Palazzo, Chiara (17 May 2017). "What is the Antikythera Mechanism? How was this ancient 'computer' discovered?". The Telegraph. Retrieved 10 June 2017.
  12. Alexander Jones, A Portable Cosmos, Oxford: Oxford University Press, pp. 10–11.
  13. Price, Derek de Solla (1974). "Gears from the Greeks. The Antikythera Mechanism: A Calendar Computer from ca. 80 B. C.". Transactions of the American Philosophical Society. New Series. 64 (7): 1–70. doi:10.2307/1006146. JSTOR 1006146.
  14. Price, Derek de Solla (1974). "Gears from the Greeks. The Antikythera Mechanism: A Calendar Computer from ca. 80 BC" Transactions of the American Philosophical Society, New Series. 64 (7): 19.
  15. Carman, Christián C.; Evans, James (15 November 2014). "On the epoch of the Antikythera mechanism and its eclipse predictor". Archive for History of Exact Sciences. 68 (6): 693–774. doi:10.1007/s00407-014-0145-5.
  16. Markoff, John (24 November 2014). "On the Trail of an Ancient Mystery – Solving the Riddles of an Early Astronomical Calculator". The New York Times. Retrieved 25 November 2014.
  17. Iversen, Paul (2017). "The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars". Hesperia. 86: 182–83.
  18. Alexander Jones, A Portable Cosmos, Oxford: Oxford University Press, pp. 93, 157–60, 233–46.
  19. T. Freeth, Y. Bitsakis, X. Moussas, J.H. Seiradakis, A.Tselikas, E. Mangou, M. Zafeiropoulou, R. Hadland, D. Bate, A. Ramsey, M. Allen, A. Crawley, P. Hockley, T. Malzbender, D. Gelb, W. Ambrisco and M.G. Edmunds. "Decoding The Antikythera Mechanism – Investigation of An Ancient Astronomical Calculator". Retrieved 27 June 2020.CS1 maint: multiple names: authors list (link)
  20. Vetenskapens värld: Bronsklumpen som kan förutsäga framtiden. SVT. 17 October 2012. Archived 20 October 2012 at the Wayback Machine
  21. Freeth, Tony (2006). "Decoding the Antikythera Mechanism: Supplementary Notes 2" (PDF). Nature. 444 (7119): 587–91. Bibcode:2006Natur.444..587F. doi:10.1038/nature05357. PMID 17136087. Archived from the original (PDF) on 26 January 2013. Retrieved 20 May 2014.
  22. Sample, Ian. "Mysteries of computer from 65 BC are solved". The Guardian. One of the remaining mysteries is why the Greek technology invented for the machine seemed to disappear..."This device is extraordinary, the only thing of its kind," said Professor Edmunds. "The astronomy is exactly right ... in terms of historic and scarcity value, I have to regard this mechanism as being more valuable than the Mona Lisa."
  23. Marchant, Jo (30 November 2006). "In search of lost time". Nature. 444 (7119): 534–38. Bibcode:2006Natur.444..534M. doi:10.1038/444534a. PMID 17136067.
  24. Efstathiou, M.; Basiakoulis, A.; Efstathiou, K.; Anastasiou, M.; Boutbaras, P.; Seiradakis, J.H. (September 2013). "The Reconstruction of the Antikythera Mechanism". International Journal of Heritage in the Digital Era. 2 (3): 307–34. doi:10.1260/2047-4970.2.3.307.
  25. Efstathiou, K.; Basiakoulis, A.; Efstathiou, M.; Anastasiou, M.; Seiradakis, J.H. (June 2012). "Determination of the gears geometrical parameters necessary for the construction of an operational model of the Antikythera Mechanism". Mechanism and Machine Theory. 52: 219–31. doi:10.1016/j.mechmachtheory.2012.01.020.
  26. "The Antikythera Mechanism at the National Archaeological Museum" Archived 21 February 2017 at the Wayback Machine. Retrieved 8 August 2015.
  27. Dimitrios (Dimitris) Kontos
  28. "History – Antikythera Mechanism Research Project". www.antikythera-mechanism.gr.
  29. "Ancient 'computer' starts to yield secrets". IOL: Technology. Independent Media. 7 June 2006. Archived from the original on 13 March 2007. Retrieved 16 July 2017.
  30. Haughton, Brian (26 December 2006). Hidden History: Lost Civilizations, Secret Knowledge, and Ancient Mysteries. Career Press. pp. 43–44. ISBN 978-1-56414-897-1. Retrieved 16 May 2011.
  31. Price, D. de S. (1974). "Gears from the Greeks: The Antikythera Mechanism, a Calendar Computer from c. 80 BC". Transactions of the American Philosophical Society. 64 (7): 1–70. doi:10.2307/1006146. JSTOR 1006146.
  32. Bohstrom, Philippe (18 November 2018), Missing Piece of Antikythera Mechanism Found on Aegean Seabed, Haaretz, retrieved 26 June 2020.
  33. Daley, Jason (15 November 2018), No, Archaeologists Probably Did Not Find a New Piece of the Antikythera Mechanism, Smithsonian Magazine, retrieved 15 November 2018.
  34. Angelakis, Dimitris G. (2 May 2005). Quantum Information Processing: From Theory to Experiment. Proceedings of the NATO Advanced Study Institute on Quantum Computation and Quantum Information. Chania, Crete, Greece: IOS Press (published 2006). p. 5. ISBN 978-1-58603-611-9. Retrieved 28 May 2013. The Antikythera mechanism, as it is now known, was probably the world's first 'analog computer'—a sophisticated device for calculating the motions of stars and planets. This remarkable assembly of more than 30 gears with a differential...
  35. Allen, Martin (27 May 2007). "Were there others? The Antikythera Mechanism Research Project". Antikythera-mechanism.gr. Archived from the original on 21 July 2011. Retrieved 24 August 2011.
  36. Iversen, Paul (2017). "The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars". Hesperia. 86: 129–203. doi:10.2972/hesperia.86.1.0129.
  37. Lazos, Christos (1994). The Antikythera Computer. Aeolus Publications GR.
  38. "Jacques-Yves Cousteau – Antikythera Mechanism Research Project". www.antikythera-mechanism.gr. Archived from the original on 5 December 2014. Retrieved 7 December 2014.
  39. "What was it made of?". Antikythera Mechanism Research Project. 4 July 2007. Archived from the original on 18 April 2012. Retrieved 16 May 2012.
  40. Freeth, Tony; Jones, Alexander; Steele, John M.; Bitsakis, Yanis (31 July 2008). "Calendars with Olympiad display and eclipse prediction on the Antikythera Mechanism".
  41. Iversen, Paul (2017). "The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars". Hesperia. 86: 134–41.
  42. Freeth, Tony (December 2009). "Decoding an Ancient Computer" (PDF). Scientific American. 301 (6): 78. Bibcode:2009SciAm.301f..76F. doi:10.1038/scientificamerican1209-76. PMID 20058643. Retrieved 26 November 2014.
  43. Article "Pergamum", Columbia Electronic Encyclopedia, 6th Edition, 1.
  44. Price, Derek de Solla (1974). "Gears from the Greeks. The Antikythera Mechanism: A Calendar Computer from ca. 80 BC". Transactions of the American Philosophical Society, New Series. 64 (7): 13; 57–62.
  45. Bitsakis, Yannis; Jones, Alexander (2013). "The Inscriptions of the Antikythera Mechanism 3: The Front Dial and Parapegma Inscriptions", Almagest 7 (2016), pp. 117–19. See also Magdalini Anastasiou et al. "The Astronomical Events of the Parapegma of the Antikythera Mechanism". Journal for the History of Astronomy. 44: 173–86.
  46. Paul Iversen, "The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars, Hesperia 86 (2017): 141–47; Alexander Jones, A Portable Cosmos, Oxford: Oxford University Press, p. 93.
  47. Kampouris, Nick. "Important New Discoveries from Greece's Ancient Antikythera Shipwreck". Greek Reporter. Retrieved 26 June 2020.
  48. "The new findings from the underwater archaeological research at the Antikythera Shipwreck". Aikaterini Laskaridis Foundation. 18 October 2019. Retrieved 23 January 2020.
  49. Marchant, Jo (2006). Decoding the Heavens. Da Capo Press. p. 180. mechanical engineer and former curator of London's Science Museum Michael Wright tells of a piece breaking off in his inspection, which was glued back into place by the museum staff.
  50. Wright, Michael T. (2007). "The Antikythera Mechanism reconsidered". Interdisciplinary Science Reviews. 32 (1): 21–43. doi:10.1179/030801807X163670. S2CID 54663891.
  51. Freeth, T. (2009). "Decoding an Ancient Computer". Scientific American. 301 (6): 76–83. Bibcode:2009SciAm.301f..76F. doi:10.1038/scientificamerican1209-76. PMID 20058643.
  52. Jones, Alexander (2017), A Portable Cosmos, Oxford: Oxford University Press, p. 97, ISBN 978-0190618599.
  53. "The Cosmos on the front of the Antikythera Mechanism". Archived from the original on 17 May 2018. Retrieved 21 May 2014.CS1 maint: BOT: original-url status unknown (link)
  54. Wright, Michael T. (March 2006). "The Antikythera Mechanism and the early history of the moon phase display" (PDF). Antiquarian Horology. 29 (3): 319–29. Retrieved 16 June 2014.
  55. Wilford, J. N. (31 July 2008). "Discovering how Greeks computed in 100 B.C." The New York Times.
  56. Connor, S. (31 July 2008). "Ancient Device Was Used To Predict Olympic Games". The Independent. London. Retrieved 27 March 2010.
  57. Paul Iversen, "The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars, Hesperia 86 (2017): 148–68.
  58. Freeth, T (2009). "Decoding an Ancient Computer". Scientific American. 301 (6): 76–83. Bibcode:2009SciAm.301f..76F. doi:10.1038/scientificamerican1209-76. PMID 20058643.
  59. Paul Iversen, "The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars, Hesperia 86 (2017): 148–64.
  60. Paul Iversen, "The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars, Hesperia 86 (2017): 165–85.
  61. "Olympic link to early 'computer'". BBC News. Retrieved 15 December 2008.
  62. Paul Iversen, "The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars, Hesperia 86 (2017): 141–47.
  63. Carman, Christián C.; Evans, James (2014). "On the epoch of the Antikythera mechanism and its eclipse predictor". Archive for History of Exact Sciences. 68 (6): 693–774. doi:10.1007/s00407-014-0145-5.
  64. "Does it favour a Heliocentric, or Geocentric Universe?". Antikythera Mechanism Research Project. 27 July 2007. Archived from the original on 21 July 2011. Retrieved 24 August 2011.
  65. Evans, James; Carman, Christián C.; Thorndyke, Alan (February 2010). "Solar anomaly and planetary displays in the Antikythera Mechanism" (PDF). Journal for the History of Astronomy. xli (1): 1–39. Bibcode:2010JHA....41....1E. doi:10.1177/002182861004100101. Retrieved 20 May 2014.
  66. Wright, Michael T. (June 2005). "The Antikythera Mechanism: a new gearing scheme" (PDF). Bulletin of the Scientific Instrument Society. 85: 2–7. Retrieved 12 March 2017.
  67. Edmunds, Mike G.; Freeth, Tony (July 2011). "Using Computation to Decode the First Known Computer". Computer. 2011–7 (7): 32–39. doi:10.1109/MC.2011.134.
  68. Carman, Christián C.; Thorndyke, Alan; Evans, James (2012). "On the Pin-and-Slot Device of the Antikythera Mechanism, with a New Application to the Superior Planets" (PDF). Journal for the History of Astronomy. 43 (1): 93–116. Bibcode:2012JHA....43...93C. doi:10.1177/002182861204300106. Retrieved 21 May 2014.
  69. An extract from a 2nd or 3rd century AD papyrus (P.Wash.Univ.inv. 181+221) about an "Astrologer's Board", where the astrologer lays out particular stones to represent the Sun, Moon and planets
  70. Geoffrey, Edmunds, Michael (1 August 2011). "An Initial Assessment of the Accuracy of the Gear Trains in the Antikythera Mechanism". Journal for the History of Astronomy. 42 (3): 307–20. Bibcode:2011JHA....42..307E. doi:10.1177/002182861104200302. Retrieved 10 May 2016.
  71. Marchant, Jo (2009). Decoding the Heavens. First Da Capo Press. pp. 40. ISBN 978-0-306-81742-7.
  72. Netz & Noel, Reviel & William (2007). The Archimedes Codex. Da Capo Press. p. 1. ISBN 978-0-306-81580-5.
  73. Pickover, Clifford (2011). The Physics Book. Sterling. p. 52. ISBN 978-1-4027-7861-2.
  74. "M. TVLLI CICERONIS DE RE PVBLICA LIBER PRIMVS" (in Latin). Archived from the original on 22 March 2007. Retrieved 23 March 2007.
  75. Rorres, Chris. "Archimedes: Spheres and Planetaria (Introduction)". New York University. Archived from the original on 10 May 2011. Retrieved 27 March 2011.
  76. Fildes, Jonathan (29 November 2006). "Ancient Moon 'computer' revisited". BBC News. Retrieved 25 April 2010.
  77. Needham, Joseph (2000). Science and Civilisation in China. 4, Part 2. Cambridge. p. 285. ISBN 0-521-05803-1.
  78. Sleeswyk, Andre (October 1981). "Vitruvius' odometer". Scientific American. 252 (4). pp. 188–200. See also: Andre Wegener Sleeswyk, "Vitruvius' waywiser", Archives internationales d'histoire des sciences, vol. 29, pp. 11–22 (1979).
  79. "Cicero, De Natura Deorum II.88 (or 33–34)". Archived from the original on 16 March 2007. Retrieved 23 March 2007.
  80. Charette, F (November 2006). "Archaeology: high tech from Ancient Greece". Nature. 444 (7119): 551–52. Bibcode:2006Natur.444..551C. doi:10.1038/444551a. PMID 17136077..
  81. Maddison, Francis (28 March 1985). "Early mathematical wheelwork: Byzantine calendrical gearing". Nature. 314 (6009): 316–17. Bibcode:1985Natur.314..316M. doi:10.1038/314316b0..
  82. Staff (17 May 2017). "115 Anniversary of the Antikythera Mechanism Discovery". Google. Retrieved 17 May 2017.
  83. Smith, Reiss (17 May 2017). "What is the Antikythera mechanism? Google Doodle marks discovery of ancient Greek computer". BBC. Retrieved 17 May 2017.
  84. "The Antikythera Shipwreck: the Ship, the Treasures, the Mechanism". Antikythera Mechanism Research Project. 6 June 2012. Retrieved 16 April 2013.
  85. "Naked Science – Star Clock BC (TV Episode)". 2011.
  86. "The World's First Computer". Antikythera Mechanism Research Project. Retrieved 21 January 2013.
  87. "BBC Four – The Two-Thousand-Year-Old Computer".
  88. "Ancient Computer". Nova. PBS. Retrieved 13 May 2014.
  89. Pavlus, John. "Small Mammal, Behind the Scenes: Lego Antikythera Mechanism". Small Mammal. Retrieved 19 July 2018.
  90. "Exhibitions". The Antikythera Mechanism Research Project.
  91. Gracey, James (23 May 2011). "Behind The Couch: 'Stonehenge Apocalypse'". BehindTheCouch web site. Retrieved 23 May 2011.
  92. "Antikythera Element - EVE Online Reference". EVE Ref.

Further reading

Books
  • Allen, M.; Ambrisco, W.; e.a. (2016). "The Inscriptions of the Antikythera Mechanism". Almagest. Almagest 7.1. Turnhout, Belgium: Brepols Publishers. ISSN 1792-2593.
  • James, Peter; Thorpe, Nick (1995). Ancient Inventions. New York: Ballantine. ISBN 978-0-345-40102-1.
  • Jones, Alexander (2017). A Portable Cosmos: Revealing the Antikythera Mechanism, Scientific Wonder of the Ancient World. Oxford: Oxford University Press. ISBN 978-0199739349.
  • Lin, Jian-Liang; Yan, Hong-Sen (2016). Decoding the Mechanisms of Antikythera Astronomical Device. Berlin [u.a.]: Springer. ISBN 978-3662484456.
  • Marchant, Jo (2008). Decoding the Heavens: Solving the Mystery of the World's First Computer. William Heinemann Ltd. ISBN 978-0-434-01835-2.
  • Price, Derek De Solla, 1975). Gears from the Greeks: The Antikythera Mechanism – A Calendar Computer from ca. 80 B.C.. Science History Publications, New York. ISBN 0-87169-647-9
  • Rosheim, Mark E. (1994). Robot Evolution: The Development of Anthrobotics. John Wiley & Sons. ISBN 978-0-471-02622-8.
  • Russo, Lucio (2004). The Forgotten Revolution: How Science Was Born in 300 BC and Why It Had To Be Reborn. Berlin: Springer. ISBN 978-3-540-20396-4.
  • Steele, J. M. (2000). Observations and Predictions of Eclipse Times by Early Astronomers. Dordrecht: Kluwer Academic. ISBN 978-0-7923-6298-2.
  • Stephenson, F. R. (1997). Historical Eclipses and the Earth's Rotation. Cambridge, UK: Cambridge University Press. ISBN 978-0-521-46194-8.
  • Toomer, G. J. (1998). Ptolemy's Almagest. Translated by Toomer, G. J. Princeton, NJ: Princeton University Press.

Journals

Other
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.