1918 California gubernatorial election
The 1918 California gubernatorial election was held on November 5, 1918.
 | |||||||||||||||||
| |||||||||||||||||
| |||||||||||||||||
| |||||||||||||||||
_portrait_circa_1917_(cropped).jpg)
.jpg)
General election results
| Party | Candidate | Votes | % | ± | |
|---|---|---|---|---|---|
| Republican | William D. Stephens (incumbent) | 387,547 | 56.28 | ||
| Independent | Theodore Arlington Bell | 251,189 | 36.48 | ||
| Socialist | Henry H. Roser | 29,003 | 4.21 | ||
| Republican | James Rolph (write-in) | 20,605 | 2.99 | ||
| Total votes | 688,344 | 100.0% | |||
| Republican hold | Swing | ||||
gollark: Consdaisdasf.
gollark: I see.
gollark: This is just a bad implementation of a "boost converter", so just look up that.
gollark: The capacitor smooths the very wobbly lines into nonwobbly lines.
gollark: The transistor switches the inductor between being connected to the voltage source's other end and being connected to it only through the diode and capacitor and resistor and such. The inductor "wants" to keep the current through it constant. When it's connected to the other end of the voltage source, it's "charging", and when it is disconnected there is a voltage across it slightly bigger than the voltage source's voltage, which causes a current through the left side of the circuit.
References
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.