Silver(II) fluoride

Silver(II) fluoride is a chemical compound with the formula AgF2. It is a rare example of a silver(II) compound. Silver usually exists in its +1 oxidation state. It is used as a fluorinating agent.

Silver(II) fluoride
Names
IUPAC name
silver(II) fluoride
Other names
silver difluoride
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.029.124
EC Number
  • 232-037-5
UNII
Properties
AgF2
Molar mass 145.865 g/mol
Appearance white or grey crystalline powder, hygroscopic
Density 4.58 g/cm3
Melting point 690 °C (1,274 °F; 963 K)
Boiling point 700 °C (1,292 °F; 973 K) (decomposes)
Decomposes violently
Structure
orthorhombic
tetragonally elongated
octahedral coordination
linear
Hazards
Main hazards toxic, reacts violently with water, powerful oxidizer
Safety data sheet MSDS
GHS pictograms
GHS Signal word Danger
GHS hazard statements
H272, H301, H302, H311, H312, H314, H331, H332
P210, P220, P221, P260, P261, P264, P270, P271, P280, P301+310, P301+312, P301+330+331, P302+352, P303+361+353, P304+312, P304+340, P305+351+338, P310, P311, P312, P321, P322, P330, P361, P363
NFPA 704 (fire diamond)
Related compounds
Other anions
Silver(I,III) oxide
Other cations
Copper(II) fluoride
Palladium(II) fluoride
Zinc fluoride
Cadmium(II) fluoride
Mercury(II) fluoride
Related compounds
Silver subfluoride
Silver(I) fluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Preparation

AgF2 can be synthesized by fluorinating Ag2O with elemental fluorine. Also, at 200 °C (473 K) elemental fluorine will react with AgF or AgCl to produce AgF2.[1][2]

As a strong fluorinating agent, AgF2 should be stored in Teflon or a passivated metal container. It is light sensitive.

AgF2 can be purchased from various suppliers, the demand being less than 100 kg/year. While laboratory experiments find use for AgF2, it is too expensive for large scale industry use. In 1993, AgF2 cost between 1000-1400 US dollars per kg.

Composition and structure

AgF2 is a white crystalline powder, but it is usually black/brown due to impurities. The F/Ag ratio for most samples is < 2, typically approaching 1.75 due to contamination with Ag and oxides and carbon.[3]

For some time, it was doubted that silver was actually in the +2 oxidation state, rather than some combination of states such as AgI[AgIIIF4], which would be similar to silver(I,III) oxide. Neutron diffraction studies, however, confirmed its description as silver(II). The AgI[AgIIIF4] was found to be present at high temperatures, but it was unstable with respect to AgF2.[4]

In the gas phase, AgF2 is believed to have D∞h symmetry.

Approximately 14 kcal/mol (59 kJ/mol) separate the ground and first excited states. The compound is paramagnetic, but it becomes ferromagnetic at temperatures below −110 °C (163 K).

Uses

AgF2 is a strong fluorinating and oxidising agent. It is formed as an intermediate in the catalysis of gaseous reactions with fluorine by silver. With fluoride ions, it forms complex ions such as AgF
3
, the blue-violet AgF2−
4
, and AgF4−
6
.[5]

It is used in the fluorination and preparation of organic perfluorocompounds.[6] This type of reaction can occur in three different ways (here Z refers to any element or group attached to carbon, X is a halogen):

  1. CZ3H + 2 AgF2 → CZ3F + HF + 2 AgF
  2. CZ3X + 2AgF2 → CZ3F + X2 + 2 AgF
  3. Z2C=CZ2 + 2 AgF2 → Z2CFCFZ2 + 2 AgF

Similar transformations can also be effected using other high valence metallic fluorides such as CoF3, MnF3, CeF4, and PbF4.

AgF
2
is also used in the fluorination of aromatic compounds, although selective monofluorinations are more difficult:[7]

C6H6 + 2 AgF2 → C6H5F + 2 AgF + HF

AgF
2
oxidises xenon to xenon difluoride in anhydrous HF solutions.[8]

2 AgF2 + Xe → 2 AgF + XeF2

It also oxidises carbon monoxide to carbonyl fluoride.

2 AgF2 + CO → 2 AgF + COF2

It reacts with water to form oxygen gas:

4 AgF2 + 4 H2O → 2 Ag2O + 8 HF + O2

AgF
2
can be used to selectively fluorinate pyridine at the ortho position under mild conditions.[9]

Safety

AgF
2
is a very strong oxidizer that reacts violently with water,[10] reacts with dilute acids to produce ozone, oxidizes iodide to iodine,[10][11] and upon contact with acetylene forms the contact explosive silver acetylide.[12] It is light-sensitive,[10] very hygroscopic and corrosive. It decomposes violently on contact with hydrogen peroxide, releasing oxygen gas.[12] It also liberates HF, F
2
, and elemental silver.[11]

gollark: !pingwhen online <@!258639553357676545> Rust.
gollark: !pingwhen online <@!258639553357676545> Rust.
gollark: !pingwhen online <@!258639553357676545> Rust.
gollark: !pingwhen online <@!258639553357676545> Rust.
gollark: !pingwhen online <@!258639553357676545> Rust.

References

  1. Priest, H. F.; Swinehert, Carl F. (1950). "Anhydrous Metal Fluorides". Inorg. Synth. Inorganic Syntheses. 3: 171–183. doi:10.1002/9780470132340.ch47. ISBN 978-0-470-13234-0.
  2. Encyclopedia of Chemical Technology. Kirk-Othermer. Vol.11, 4th Ed. (1991)
  3. J.T. Wolan; G.B. Hoflund (1998). "Surface Characterization Study of AgF and AgF2 Powders Using XPS and ISS". Applied Surface Science. 125 (3–4): 251. doi:10.1016/S0169-4332(97)00498-4.
  4. Hans-Christian Miller; Axel Schultz & Magdolna Hargittai (2005). "Structure and Bonding in Silver Halides. A Quantum Chemical Study of the Monomers: Ag2X, AgX, AgX2, and AgX3(X = F, Cl, Br, I)". J. Am. Chem. Soc. 127 (22): 8133–45. doi:10.1021/ja051442j. PMID 15926841.
  5. Egon Wiberg; Nils Wiberg; Arnold Frederick Holleman (2001). Inorganic chemistry. Academic Press. pp. 1272–1273. ISBN 0-12-352651-5.
  6. Rausch, D.; Davis, r.; Osborne, D. W. (1963). "The Addition of Fluorine to Halogenated Olefins by Means of Metal Fluorides". J. Org. Chem. 28 (2): 494–497. doi:10.1021/jo01037a055.
  7. Zweig, A.; Fischer, R. G.; Lancaster, J. (1980). "New Methods for Selective Monofluorination of Aromatics Using Silver Difluoride". J. Org. Chem. 45 (18): 3597. doi:10.1021/jo01306a011.
  8. Levec, J.; Slivnik, J.; Zemva, B. (1974). "On the Reaction Between Xenon and Fluorine". Journal of Inorganic and Nuclear Chemistry. 36 (5): 997. doi:10.1016/0022-1902(74)80203-4.
  9. Fier, P. S.; Hartwig, J. F. (2013). "Selective C-H Fluorination of Pyridines and Diazines Inspired by a Classic Amination Reaction". Science. 342: 956. doi:10.1126/science.1243759. PMID 24264986.
  10. Dale L. Perry; Sidney L. Phillips (1995). Handbook of inorganic compounds. CRC Press. p. 352. ISBN 0-8493-8671-3.
  11. W. L. F. Armarego; Christina Li Lin Chai (2009). Purification of Laboratory Chemicals (6th ed.). Butterworth-Heinemann. p. 490. ISBN 1-85617-567-7.
  12. Richard P. Pohanish; Stanley A. Greene (2009). Wiley Guide to Chemical Incompatibilities (3rd ed.). John Wiley and Sons. p. 93. ISBN 0-470-38763-7.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.