Nacra 20

The Nacra 20 is a catamaran sailing dinghy that was designed by Gino Morrelli and Pete Melvin as a one-design racer and first built in 1998.[1][2]

Nacra 20
Nacra F20 Carbon
Development
DesignerGino Morrelli and Pete Melvin
LocationNetherlands
Year1998
Builder(s)Performance Catamarans
Nacra Sailing
Boat
CrewTwo
Boat weight390 lb (177 kg)
Draft3.18 ft (0.97 m) with the daggerboards down
Hull
Typecatamaran
ConstructionFibreglass foam sandwich
LOA20.00 ft (6.10 m)
Beam8.50 ft (2.59 m)
Hull appendages
Keel/board typetwin daggerboards
Rudder(s)twin transom-mounted rudders
Rig
Rig typeBermuda rig
Sails
SailplanFractional rigged sloop
Mainsail area206 sq ft (19.1 m2)
Jib/genoa area50 sq ft (4.6 m2)
Spinnaker area269 sq ft (25.0 m2)
Total sail area256 sq ft (23.8 m2)

The design is a development of the Nacra F18 Infusion, using the same rudders, mast, inter-hull beams and other small parts and fittings, but with new, longer hulls.[3]

The design was originally marketed by the manufacturer as the Nacra Inter 20 and later as the Nacara 20, more recently it has been developed into the Nacara F20 Carbon and the hydrofoil-equipped Nacara F20 Carbon FCS.[1][3][4]

The Nacara F20 Carbon is a recognized World Sailing international competition class.[5]

Production

The design was initially built by Performance Catamarans in Santa Ana, California, United States, but that company is out of business. Since 2007 the design has been built by Nacra Sailing in Scheveningen, Netherlands, and it remains in production as the Nacara F20 Carbon and Nacara F20 Carbon FCS models.[1][3][6][7]

Design

The Nacra 20 is a racing catamaran sailboat. All models have fractional sloop rigs with rotating masts, vertical transoms, transom-hung rudders controlled by a tiller and retractable daggerboards. They are normally sailed by a crew of two and the design is equipped with two trapezes for balance.[1][3]

Variants

Nacra 20
This model was introduced in 1998 as the Nacra Inter 20 and later called the Nacra 20. Production of this model ended after three years, in 2001. The hulls are built from a fibreglass foam sandwich. It has a length overall of 20.00 ft (6.1 m), a beam of 8.50 ft (2.6 m) and displaces 390 lb (177 kg). The hulls have plumb stems and a draft of 3.18 ft (0.97 m) with the daggerboards extended and 0.42 ft (0.13 m) with them retracted, allowing beaching or ground transportation on a trailer.[1][8]
Nacra F20 Carbon
The hulls on this model are built predominantly from a carbon fibre foam sandwich with epoxy resin. It has a length overall of 20.25 ft (6.2 m), a beam of 10.42 ft (3.2 m) and displaces 401 lb (182 kg). The hulls have reverse raked stems and the rudders are a "kick-up" design. The rudders and daggerboards are made from pre-preg carbon fibre. The spinnaker is made from nylon.[3][4]
Nacra F20 Carbon FCS (Flight Control System)
This sailing hydrofoil model commenced production in 2014. It shares most of its parts with the Nacra F20 Carbon, including hulls built predominantly from a carbon fibre foam sandwich with epoxy resin. It has a length overall of 20.25 ft (6.2 m), a beam of 10.42 ft (3.2 m) and displaces 445 lb (202 kg). The hulls have reverse raked stems. The pre-preg carbon fibre hydrofoil daggerboards and rudders are unique to this model. The daggerboards are "L"-shaped and the rudders "T"-shaped. The spinnaker is made from polyester.[3][4][9]

Operational history

In a 2012 review of the Nacra 20 Carbon in Sail magazine, reviewer Jeremy Evans wrote, "the Nacra 20 Carbon is a spectacular new one-design that is very light—20 pounds lighter than the smaller Formula 18—very stiff and very powerful, with its all-carbon wave-piercing hulls and a superb carbon/Kevlar mainsail ... Sailing in a light to moderate breeze, I found the boat to be stable, predictable and effortlessly quick .. All in all, this is a beautiful boat capable of blistering speed and a truly thrilling ride in a wide range of conditions."[10]

gollark: The main obstacle is that the data structures are very discorduous.
gollark: ABR's event bus mechanism should allow adding a new transport quite easily.
gollark: ++tel unlink apionet #g
gollark: ++remind 13h chdck
gollark: Huh, permissions mistake?

See also

References

  1. McArthur, Bruce (2020). "Nacra 20 sailboat". sailboatdata.com. Archived from the original on 27 July 2020. Retrieved 27 July 2020.
  2. McArthur, Bruce (2020). "Morrelli & Melvin". sailboatdata.com. Archived from the original on 27 July 2020. Retrieved 27 July 2020.
  3. Nacra Sailing (2019). "Nacra F20 Carbon". nacrasailing.com. Archived from the original on 27 July 2020. Retrieved 27 July 2020.
  4. McArthur, Bruce (2020). "Nacara F20 Carbon sailboat". sailboatdata.com. Archived from the original on 29 June 2020. Retrieved 29 June 2020.
  5. World Sailing (2020). "Nacara F20 Carbon". sailing.org. Archived from the original on 27 July 2020. Retrieved 15 July 2020.
  6. McArthur, Bruce (2020). "Performance Catamarans Inc". sailboatdata.com. Archived from the original on 27 July 2020. Retrieved 27 July 2020.
  7. McArthur, Bruce (2020). "NACRA Catamarans". sailboatdata.com. Archived from the original on 27 July 2020. Retrieved 27 July 2020.
  8. "Nacra Inter 20". Boat-Specs.com. 2019. Archived from the original on 27 July 2020. Retrieved 27 June 2020.
  9. "Nacra 20 FCS". Boat-Specs.com. 2019. Archived from the original on 27 July 2020. Retrieved 27 June 2020.
  10. Evans, Jeremy (2 August 2017). "Nacra 20 Carbon". Sail magazine. Archived from the original on 27 July 2020. Retrieved 27 July 2020.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.