Frazil ice

Frazil ice is a collection of loose, randomly oriented, plate or discoid ice crystals formed in supercooled turbulent water.[1] Its formation is common during the winter in rivers and lakes located in northern latitudes, and usually forms in open-water reaches of rivers where and when the heat exchange between the air and the water is such that the water temperature can drop below its freezing point (typically not lower than -0.1 °C in rivers). As a rule of thumb, such conditions may happen on cold and clear nights, when the air temperature is lower than −6 °C (21 °F). Frazil ice also forms in oceans, where it is often referred to as grease ice when floating on the surface.

Frazil ice in Yosemite Creek

Frazil ice is notorious for blocking water intakes [2][3][4] as crystals accumulate and build up on the intake trash rack. Such blockages negatively impact water supply facilities, hydropower plants, nuclear power facilities, and vessels navigating in cold waters, and can lead to unexpected shut downs of the facility or even collapse of the trash rack.

Formation
Frazil ice flowing in the mouth of the river Blanda in Iceland

When the water surface begins to lose heat rapidly, the water becomes supercooled. Turbulence, caused by strong winds or flow from a river, will mix the supercooled water throughout its entire depth. The supercooled water will already be encouraging the formation of small ice crystals (frazil ice) and the crystals get taken to the bottom of the water body. Ice generally floats, but due to frazil ice's small size relative to current speeds, it has an ineffective buoyancy and can be carried to the bottom very easily.

Through a process called secondary nucleation, the crystals quickly increase in number, and because of its supercooled surrounding, the crystals will continue to grow. Sometimes, the concentration is estimated to reach one million ice crystals per cubic meter.

As the crystals grow in number and size, the frazil ice will begin to adhere to objects in the water, especially if the objects themselves are at a temperature below water's freezing point. The accumulation of frazil ice often causes flooding or damage to objects such as trash racks. Since frazil ice is found below the surface of water, it is difficult to detect its formation.

Usually what happens is the frazil ice accumulates on the upstream side of objects and sticks to them. The frazil ice accumulates as more gets deposited. The growth will extend upstream and increase in width until the point where the frazil ice accumulations bridge together and block the water. As more and more water flows against this block, the pressure on the upstream side increases and causes a differential pressure (difference in pressure from the upstream side and the downstream side). This will cause the growth of the bridge to extend downstream. Once this happens, flooding and damage is likely unless otherwise prevented.

Frazil ice has also been demonstrated to form beneath temperate (or "warm-based") glaciers as water flows quickly downhill and supercools due to a rapid loss of pressure. This "glaciohydraulic supercooling" process forms an open network of platy ice crystals that can effectively trap silt from the sediment-laden water that flows beneath glaciers and ice sheets. Subsequent freezing and recrystallization can result in a layer of sediment-rich ice at the base of the glacier which, upon melting at the terminus, can result in significant accumulation of sediment in moraines. This phenomenon has been verified by elevated concentrations of tritium — produced by nuclear weapons testing and therefore almost entirely absent in ice frozen before 1945 — in the basal ice of several glaciers (signifying young ice) and the observation of rapid growth of ice crystals around water discharge vents at glacier termini.

Control

There are several ways to control frazil ice build up. They include suppression, mechanical control, thermal control, vibration, materials selection and damage mitigation.

Suppression

Frazil ice forms in supercooled water which occurs because the surface water loses heat to cooler air above. Suppression is the idea of ‘insulating’ the surface water with an intact, stable ice cover. The ice cover will prevent heat loss and warm the supercooled water that might have already formed. Sufficient area needs to be covered in order for this method to work, but it is still unknown what is meant by "sufficient". The St. Lawrence River is explicitly managed to create "flow conditions that help form a stable ice cover" to prevent frazil ice and subsequent ice jams.[5]

Mechanical control

These methods include stabilizing freeze without restricting water flow, such as implementing weirs and ice booms, installing water jets to break up any accumulation that might occur, and using manual labour to rake away the accumulation. This final method is often not preferred because of high labour costs, cold, wet and late night working conditions. Back flushing is another technology that uses the idea of cancelling out the differential pressure caused by the frazil ice accumulation. This technology creates a high pressure on the downstream side of objects to reverse the differential pressure.

Thermal control

These methods either heat the structures in the water to prevent frazil ice adhesion or heat the water to prevent frazil ice from forming in the first place. When heating the structure, it must be heated to a temperature above freezing. Electrical resistance heaters have been found to work well, but these have potential safety problems. Installing hollow tubes in the structures through which steam or warm water is pumped also works, but this method has been seen to cause operational problems. Other active methods are also available. Sometimes warm water byproducts are released from nearby water facilities, and the warm water is wasted. Redirecting this water to potential frazil ice accumulation regions could raise the water temperature by 0.1–0.2 °C (0.18–0.36 °F), often enough to prevent supercooled water from developing.

Vibration

Although still in the experimental stages, blasting with dynamite is one form of vibrational control that will break loose any frazil ice accumulation. The charge must be precise such that the ice breaks, but surrounding structures and environment are not harmed. Safety of the blasting also is important and nearby residents might complain about sound pollution. For all these reasons, this method is not often used, except as an emergency last resort.

Materials selection

Man-made structures are often the objects to which frazil ice adheres. As such, the choice of materials for these structures should include consideration of ice adhesion. Steel structures, for example will rust, and rust-to-ice adhesion is very strong. Choosing a material with lower adhesion such as plastic, fiberglass, graphite or even an epoxy paint coating on the steel will reduce the adhesion probability. Although adhesion will still occur, using such materials makes other methods, such as raking, easier.

Damage mitigation

Damage could be reduced by protecting designated flood regions with mechanical structures.

gollark: "Private" information which you apparently don't keep...?
gollark: That does not actually justify said rules.
gollark: I mean, if it's just that, then why can you *not* actually show people the contents of the seeecret page on them?
gollark: I meant what the "moderative actions" are.
gollark: No, I mean the "no telling people what they are".

See also

References
  1. Daly, Steven F. (1994). Report on Frazil Ice. Cold Regions Research and Engineering Laboratory.
  2. Richard, Martin; Morse, Brian (2008-07-01). "Multiple frazil ice blockages at a water intake in the St. Lawrence River". Cold Regions Science and Technology. 53 (2): 131–149. doi:10.1016/j.coldregions.2007.10.003. ISSN 0165-232X.
  3. Daly, Steven F.; Ettema, Robert (August 2006). "Frazil Ice Blockage of Water Intakes in the Great Lakes". Journal of Hydraulic Engineering. 132 (8): 814–824. doi:10.1061/(asce)0733-9429(2006)132:8(814). ISSN 0733-9429.
  4. Daly, Steven F. (1991). Frazil Ice Blockage of Intake Trash Racks. Cold Regions Research and Engineering Laboratory.
  5. International Lake Ontario - St. Lawrence River Board (25 May 2018). Observed Conditions & Regulated Outflows in 2017 (PDF). International Joint Commission. p. 21. Retrieved 3 May 2019.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.