Cadmium acetate

Cadmium acetate is the chemical compound with the formula Cd(CH3CO2)2. This colourless solid is classified coordination polymer, featuring acetate ligands interconnecting cadmium centers. The compound exists in anhydrous form and as a dihydrate. It forms by treating cadmium oxide with acetic acid:[3][4]

CdO + 2 CH3COOH → Cd(CH3COO)2 + H2O
Cadmium acetate
Names
IUPAC name
Cadmium acetate
Other names
Cadmium diacetate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.008.049
EC Number
  • 208-853-2
RTECS number
  • AF7505000
UNII
UN number 2570
Properties
Cd(CH3COO)2 (anhydrous)
Cd(CH3COO)2·2H2O (dihydrate)
Molar mass 230.500 g/mol (anhydrous)
266.529 g/mol (dihydrate)
Appearance colorless crystals (anhydrous)
white crystals (dihydrate)
Odor acetic acid
Density 2.341 g/cm3 (anhydrous)
2.01 g/cm3 (dihydrate)
Melting point 255 °C (491 °F; 528 K) (anhydrous) dihydrate decomposes at 130°C [1]
soluble (anhydrous), very soluble (dihydrate)
Solubility soluble in methanol, ethanol (anhydrous)
soluble in ethanol (dihydrate)
-83.7·10−6 cm3/mol
Structure
monoclinic
Hazards
GHS pictograms
GHS Signal word Warning
GHS hazard statements
H302, H312, H332, H400, H410
P261, P264, P270, P271, P273, P280, P301+312, P302+352, P304+312, P304+340, P312, P322, P330, P363, P391, P501
NFPA 704 (fire diamond)
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
3
0
NIOSH (US health exposure limits):
PEL (Permissible)
[1910.1027] TWA 0.005 mg/m3 (as Cd)[2]
REL (Recommended)
Ca[2]
IDLH (Immediate danger)
Ca [9 mg/m3 (as Cd)][2]
Related compounds
Other anions
Cadmium fluoride
Cadmium chloride
Cadmium bromide
Cadmium iodide
Other cations
Zinc acetate
Mercury(II) acetate
Silver acetate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Uses

Cadmium acetate is used for glazing ceramics and pottery; in electroplating baths, in dyeing and printing textiles; and as an analytic reagent for sulfur, selenium and tellurium.[4]

Preparation

Cadmium acetate is prepared by treating cadmium oxide with acetic acid. The compound may also be prepared by treating cadmium nitrate with acetic anhydride.

Safety

Cadmium compounds are considered Group 1 carcinogens by the IARC.

gollark: Now to figure out where my mysterious extra disk drive is.
gollark: It probably did have files on it. Never mind.
gollark: Wait, I think there was a weird mixup and I was reading from a different disk drive somehow.
gollark: rm disk/* with it in a disk drive.
gollark: It had no files on it - including hidden ones - and stayed bricked after I wiped it.

References

  1. Lide, David R. (1998). Handbook of Chemistry and Physics (87 ed.). Boca Raton, Florida: CRC Press. p. 447. ISBN 0-8493-0594-2.
  2. NIOSH Pocket Guide to Chemical Hazards. "#0087". National Institute for Occupational Safety and Health (NIOSH).
  3. Gangolli, S. (1999). The Dictionary of Substances and Their Effects. London: Royal Society of Chemistry. pp. 12–13. Retrieved 2009-03-29.
  4. Patnaik, Pradyot (2003). Handbook of Inorganic Chemical Compounds. McGraw-Hill Professional. pp. 143–144. ISBN 0-07-049439-8. Retrieved 2009-03-29.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.