Camera

A camera is an optical instrument used to record images. At their most basic, cameras are sealed boxes (the camera body) with a small hole (the aperture) that allow light in to capture an image on a light-sensitive surface (usually photographic film or a digital sensor). Cameras have various mechanisms to control how the light falls onto the light-sensitive surface. Lenses focus the light entering the camera, the size of the aperture can be widened or narrowed to let more or less light into the camera, and a shutter mechanism determines the amount of time the photo-sensitive surface is exposed to the light.

This article is about the mechanics and primary types of cameras. For the history of camera development, see History of the camera. For modern specifics, see Digital camera. For a more comprehensive list of cameras, see List of camera types. For other uses, see Camera (disambiguation).

Leica Camera (1950s)
Hasselblad 500 C/M with Zeiss lens

The still image camera is the main instrument in the art of photography and captured images may be reproduced later as a part of the process of photography, digital imaging, photographic printing. The similar artistic fields in the moving image camera domain are film, videography, and cinematography.

The word camera comes from camera obscura, which means "dark chamber" and is the Latin name of the original device for projecting an image of external reality onto a flat surface. The modern photographic camera evolved from the camera obscura. The functioning of the camera is very similar to the functioning of the human eye. The first permanent photograph was made in 1825 by Joseph Nicéphore Niépce.

Mechanics
Basic elements of a modern digital SLR still camera

A camera captures light photons, usually from the visible spectrum for human viewing, but in general could also be from other portions of the electromagnetic spectrum.[1]:vii

All cameras use the same basic design: light enters an enclosed box through a converging or convex lens and an image is recorded on a light-sensitive medium (mainly a transition metal-halide). A shutter mechanism controls the length of time that light can enter the camera.[2]:1182–1183

Most cameras also have a viewfinder, which shows the scene to be recorded, and the ability to control focus and exposure so that it is not too bright or too dim.[3]:4

Exposure control

Aperture
Main article: Aperture
Different apertures of a lens

The aperture, sometimes called the diaphragm or iris,[4][5] is the opening through which light enters the camera.[6] Typically located in the lens,[7] this opening can be widened or narrowed to control the amount of light that strikes the film.[8] The aperture is controlled by the movements of overlapping plates or blades that rotate together and apart to shrink and expand the hole at the center.[8][9] The diameter of the aperture can be set manually, typically by adjusting a dial on the camera body or lens, or automatically based on calculations influenced by an internal light meter.[8]

The size of the opening is set at standard increments, typically called "f-stops"[8] (but also "f-numbers", "stop numbers", or simply "steps" or "stops"), that usually range from f/1.4 to f/32 in standard increments: 1.4, 2, 2.8, 4, 5.6, 8, 11, 16, 22, and 32.[4] As the numbers increase, each increment (or "stop") halves the amount of light entering the camera.[7] Conversely, the lower the number, the larger the opening, and so the more light that is let into the camera.[8]

The wider opening at the lower f-stops narrows the range of focus so the background of an image is blurry when focusing on the foreground, and vice-versa. This "depth of field" increases as the aperture closes, so that objects that are at differing distances from the camera can both be in focus; when the aperture is at its narrowest, the foreground and background are both in sharp focus.[5]

Shutter
Main article: Shutter (photography)

The shutter, along with the aperture, is one of two ways to control the amount of light entering the camera. The shutter determines the duration that the light-sensitive surface is exposed to light. The shutter is opened, light enters the camera and exposes the film or sensor to light, and then the shutter closes.[7][10]

There are two types of mechanical shutters. The leaf-type uses a circular iris diaphragm maintained under spring tension inside or just behind the lens that rapidly opens and closes when the shutter is released.[4]

A focal-plane shutter. In this shutter, the metal shutter blades travel vertically.

More commonly, a focal-plane shutter is used.[7] This shutter operates close to the film plane and employs metal plates or cloth curtains with an opening that passes across the light-sensitive surface. The curtains or plates have an opening that is pulled across the film plane during an exposure. The focal-plane shutter is typically used in single-lens reflex (SLR) cameras, since covering the film rather than blocking the light passing through the lens allows the photographer to view through the image through the lens at all times except during the exposure itself. Covering the film also facilitates removing the lens from a loaded camera (many SLRs have interchangeable lenses).[8][4]

Digital cameras may use one of these types of mechanical shutters or they may use an electronic shutter, the type used in the cameras of smartphones. Electronic shutters either record data from the entire sensor at the same time (a global shutter) or record the data line by line across the sensor (a rolling shutter).[8]

In movie cameras, a rotary shutter opens and closes in sync with the advancing of each frame of film.[8][11]

The duration is called the shutter speed or exposure time. The longer the shutter speed, the slower it is. Typical exposure times can range from one second to 1/1,000 of a second, though durations longer and shorter than this are not uncommon. In the early stages of photography, exposures were often several minutes long. These long exposure times often result in blurry images, as a single object is recorded in multiple places across a single image for the duration of the exposure. To prevent this, shorter exposure times can be used. Very short exposure times can capture fast-moving action and completely eliminate motion blur.[12][4][8][7]

Like aperture settings, exposure times increment in powers of two. The two settings determine the exposure value (EV), a measure of how much light is recorded during the exposure. There is a direct relationship between the exposure times and aperture settings so that if the exposure time is lengthened one step, but the aperture opening is also narrowed one step, the amount of light exposing the film or sensor is the same.[7]

Metering
Main article: Light meter
A handheld digital light meter showing an exposure of 1/200th at an aperture of f/11, at ISO 100. The light sensor is on top, under the white diffusing hemisphere.

In most modern cameras, the amount of light entering the camera is measured using a built-in light meter or exposure meter.[lower-alpha 1] Taken through the lens (and so called TTL metering), these readings are taken using a panel of semi-conductors that are sensitive to light.[9] They are used to help calculate the best exposure settings. These settings are typically determined automatically as the reading is used by the camera's microprocessor. The reading from the light meter is combined with aperture settings, exposure times, and film or sensor sensitivity to calculate the optimal exposure.[lower-alpha 2]

Light meters typically average the light in a scene to 18% middle gray. More advanced cameras are more nuanced in their metering, weighing the center of the frame more heavily (center-weighted metering), considering the differences in light across the image (matrix metering), or allowing the photographer to take a light reading at a specific point within the image (spot metering).[5][12][6][8]

Lens
Main articles: Camera lens and Photographic lens design

The lens of a camera captures the light from the subject and brings it to a focus on the sensor. The design and manufacture of the lens is critical to the quality of the photograph being taken. The technological revolution in camera design in the 19th century revolutionized optical glass manufacture and lens design with great benefits for modern lens manufacture in a wide range of optical instruments from reading glasses to microscopes. Pioneers included Zeiss and Leitz.

Camera lenses are made in a wide range of focal lengths. They range from extreme wide angle, and standard, medium telephoto. Each lens is best suited to a certain type of photography. The extreme wide angle may be preferred for architecture because it has the capacity to capture a wide view of a building. The normal lens, because it often has a wide aperture, is often used for street and documentary photography. The telephoto lens is useful for sports and wildlife but it is more susceptible to camera shake.[13]

Focus
The distance range in which objects appear clear and sharp, called depth of field, can be adjusted by many cameras. This allows for a photographer to control which objects appear in focus, and which do not.

Due to the optical properties of photographic lenses, only objects within a limited range of distances from the camera will be reproduced clearly. The process of adjusting this range is known as changing the camera's focus. There are various ways of focusing a camera accurately. The simplest cameras have fixed focus and use a small aperture and wide-angle lens to ensure that everything within a certain range of distance from the lens, usually around 3 metres (10 ft) to infinity, is in reasonable focus. Fixed focus cameras are usually inexpensive types, such as single-use cameras. The camera can also have a limited focusing range or scale-focus that is indicated on the camera body. The user will guess or calculate the distance to the subject and adjust the focus accordingly. On some cameras this is indicated by symbols (head-and-shoulders; two people standing upright; one tree; mountains).

Rangefinder cameras allow the distance to objects to be measured by means of a coupled parallax unit on top of the camera, allowing the focus to be set with accuracy. Single-lens reflex cameras allow the photographer to determine the focus and composition visually using the objective lens and a moving mirror to project the image onto a ground glass or plastic micro-prism screen. Twin-lens reflex cameras use an objective lens and a focusing lens unit (usually identical to the objective lens.) in a parallel body for composition and focusing. View cameras use a ground glass screen which is removed and replaced by either a photographic plate or a reusable holder containing sheet film before exposure. Modern cameras often offer autofocus systems to focus the camera automatically by a variety of methods.[14]

Some experimental cameras, for example the planar Fourier capture array (PFCA), do not require focusing to allow them to take pictures. In conventional digital photography, lenses or mirrors map all of the light originating from a single point of an in-focus object to a single point at the sensor plane. Each pixel thus relates an independent piece of information about the far-away scene. In contrast, a PFCA does not have a lens or mirror, but each pixel has an idiosyncratic pair of diffraction gratings above it, allowing each pixel to likewise relate an independent piece of information (specifically, one component of the 2D Fourier transform) about the far-away scene. Together, complete scene information is captured and images can be reconstructed by computation.

Some cameras have post focusing. Post focusing means take the pictures first and then focusing later at the personal computer. The camera uses many tiny lenses on the sensor to capture light from every camera angle of a scene and is called plenoptics technology. A current plenoptic camera design has 40,000 lenses working together to grab the optimal picture.[15]

Image capture on film

Traditional cameras capture light onto photographic plate or photographic film. Video and digital cameras use an electronic image sensor, usually a charge-coupled device (CCD) or a CMOS sensor to capture images which can be transferred or stored in a memory card or other storage inside the camera for later playback or processing.

A wide range of film and plate formats have been used by cameras. In the early history plate sizes were often specific for the make and model of camera although there quickly developed some standardisation for the more popular cameras. The introduction of roll film drove the standardization process still further so that by the 1950s only a few standard roll films were in use. These included 120 film providing 8, 12 or 16 exposures, 220 film providing 16 or 24 exposures, 127 film providing 8 or 12 exposures (principally in Brownie cameras) and 135 (35mm film) providing 12, 20 or 36 exposures – or up to 72 exposures in the half-frame format or in bulk cassettes for the Leica Camera range.

For cine cameras, film 35 mm wide and perforated with sprocket holes was established as the standard format in the 1890s. It was used for nearly all film-based professional motion picture production. For amateur use, several smaller and therefore less expensive formats were introduced. 17.5 mm film, created by splitting 35 mm film, was one early amateur format, but 9.5 mm film, introduced in Europe in 1922, and 16 mm film, introduced in the US in 1923, soon became the standards for "home movies" in their respective hemispheres. In 1932, the even more economical 8 mm format was created by doubling the number of perforations in 16 mm film, then splitting it, usually after exposure and processing. The Super 8 format, still 8 mm wide but with smaller perforations to make room for substantially larger film frames, was introduced in 1965.

Film speed

Traditionally used to "tell the camera" the film speed of the selected film on film cameras, film speed numbers are employed on modern digital cameras as an indication of the system's gain from light to numerical output and to control the automatic exposure system. Film speed is usually measured via the ISO system. The higher the film speed number the greater the film sensitivity to light, whereas with a lower number, the film is less sensitive to light.

White balance

On digital cameras, electronic compensation for the color temperature associated with a given set of lighting conditions, ensuring that white light is registered as such on the imaging chip and therefore that the colors in the frame will appear natural. On mechanical, film-based cameras, this function is served by the operator's choice of film stock or with color correction filters. In addition to using white balance to register natural coloration of the image, photographers may employ white balance to aesthetic end, for example, white balancing to a blue object in order to obtain a warm color temperature.

Camera accessories

Flash

A flash, which provides a short burst of bright light during the exposure, is a commonly used artificial light source in photography. Most modern flash systems use a battery-powered high-voltage discharge through a gas-filled tube to generate bright light for a very short time (1/1,000 of a second or less).[lower-alpha 3][6]

Many flash units measure the light reflected from the flash to help determine the appropriate duration of the flash. When the flash is attached directly to the camera—typically in a slot at the top of the camera (the flash shoe or hot shoe) or through a cable—activating the shutter on the camera triggers the flash, and the camera's internal light meter can help determine the duration of the flash.[6][5]

Other accessories

Accessories for cameras are mainly for care, protection, special effects and functions.

  • Lens hood: used on the end of a lens to block the sun or other light source to prevent glare and lens flare (see also matte box).
  • Lens cap: covers and protects the lens during storage.
  • Lens adapter: allows the use of lenses other than those for which the camera was designed.
  • Lens filters: allow artificial colors or change light density.
  • Lens extension tubes allow close focus in macro photography.
  • Flash equipment: including light diffuser, mount and stand, reflector, soft box, trigger and cord.
  • Care and protection: including camera case and cover, maintenance tools, and screen protector.
  • Camera monitor: provides an off-camera view of the composition with a brighter and more colorful screen, and typically exposes more advanced tools such as framing guides, focus peaking, zebra stripes, waveform monitors (oftentimes as an "RGB parade"), vectorscopes and false color to highlight areas of the image critical to the photographer.
  • Large format cameras use special equipment which includes magnifier loupe, view finder, angle finder, focusing rail /truck.
  • Battery and sometimes a charger.
  • Some professional SLR could be provided with interchangeable finders for eye-level or waist-level focusing, focusing screens, eye-cup, data backs, motor-drives for film transportation or external battery packs.
  • Tripod, primarily used for keeping the camera steady while recording video, doing long exposure and timelapse photography.
  • microscope adapter, an adapter used to connect a camera to a microscope to photograph what the microscope is examining.
  • cable release, a remote shutter button that can be connected to the camera via a cable to remotely control the shutter, it can be used to lock the shutter open for a desired period of time. It is also commonly used to prevent camera shake from pressing the built in camera shutter button.
  • Dew shield – Prevents moisture build up on the lens.
  • UV filter, Can protect the front element of a lens from scratches, cracks, smudges, dirt, dust and moisture while keeping a minimum impact on image quality.

Primary types

Single-lens reflex (SLR) camera
Main article: Single-lens reflex camera
Further information: Instant return mirror
Nikon D200 Digital Camera

In photography, the single-lens reflex camera (SLR) is provided with a mirror to redirect light from the picture taking lens to the viewfinder prior to releasing the shutter for composing and focusing an image. When the shutter is released, the mirror swings up and away allowing the exposure of the photographic medium and instantly returns after the exposure. No SLR camera before 1954 had this feature, although the mirror on some early SLR cameras was entirely operated by the force exerted on the shutter release and only returned when the finger pressure was released.[16][17] The Asahiflex II, released by Japanese company Asahi (Pentax) in 1954, was the world's first SLR camera with an instant return mirror.[18]

In the single-lens reflex camera, the photographer sees the scene through the camera lens. This avoids the problem of parallax which occurs when the viewfinder or viewing lens is separated from the taking lens. Single-lens reflex cameras have been made in several formats including sheet film 5x7" and 4x5", roll film 220/120 taking 8,10, 12 or 16 photographs on a 120 roll and twice that number of a 220 film. These correspond to 6x9, 6x7, 6x6 and 6x4.5 respectively (all dimensions in cm). Notable manufacturers of large format and roll film SLR cameras include Bronica, Graflex, Hasselblad, Mamiya, and Pentax. However the most common format of SLR cameras has been 35 mm and subsequently the migration to digital SLR cameras, using almost identical sized bodies and sometimes using the same lens systems.

Almost all SLR cameras use a front surfaced mirror in the optical path to direct the light from the lens via a viewing screen and pentaprism to the eyepiece. At the time of exposure the mirror is flipped up out of the light path before the shutter opens. Some early cameras experimented with other methods of providing through-the-lens viewing, including the use of a semi-transparent pellicle as in the Canon Pellix[19] and others with a small periscope such as in the Corfield Periflex series.[20]

Large-format camera
Main article: View camera

The large-format camera, taking sheet film, is a direct successor of the early plate cameras and remained in use for high quality photography and for technical, architectural and industrial photography. There are three common types, the view camera with its monorail and field camera variants, and the press camera. They have an extensible bellows with the lens and shutter mounted on a lens plate at the front. Backs taking rollfilm, and later digital backs are available in addition to the standard dark slide back. These cameras have a wide range of movements allowing very close control of focus and perspective. Composition and focusing is done on view cameras by viewing a ground-glass screen which is replaced by the film to make the exposure; they are suitable for static subjects only, and are slow to use.

Plate camera
19th century studio camera, with bellows for focusing
Main article: Photographic plate

The earliest cameras produced in significant numbers used sensitised glass plates were plate cameras. Light entered a lens mounted on a lens board which was separated from the plate by an extendible bellows.There were simple box cameras for glass plates but also single-lens reflex cameras with interchangeable lenses and even for color photography (Autochrome Lumière). Many of these cameras had controls to raise or lower the lens and to tilt it forwards or backwards to control perspective.

Focusing of these plate cameras was by the use of a ground glass screen at the point of focus. Because lens design only allowed rather small aperture lenses, the image on the ground glass screen was faint and most photographers had a dark cloth to cover their heads to allow focussing and composition to be carried out more easily. When focus and composition were satisfactory, the ground glass screen was removed and a sensitised plate put in its place protected by a dark slide. To make the exposure, the dark slide was carefully slid out and the shutter opened and then closed and the dark slide replaced.

Glass plates were later replaced by sheet film in a dark slide for sheet film; adaptor sleeves were made to allow sheet film to be used in plate holders. In addition to the ground glass, a simple optical viewfinder was often fitted.

Medium-format camera
Main article: Medium-format

Medium-format cameras have a film size between the large-format cameras and smaller 35 mm cameras. Typically these systems use 120 or 220 rollfilm. The most common image sizes are 6×4.5 cm, 6×6 cm and 6×7 cm; the older 6×9 cm is rarely used. The designs of this kind of camera show greater variation than their larger brethren, ranging from monorail systems through the classic Hasselblad model with separate backs, to smaller rangefinder cameras. There are even compact amateur cameras available in this format.

Twin-lens reflex camera
Twin-lens reflex camera
Main article: Twin-lens reflex camera

Twin-lens reflex cameras used a pair of nearly identical lenses, one to form the image and one as a viewfinder. The lenses were arranged with the viewing lens immediately above the taking lens. The viewing lens projects an image onto a viewing screen which can be seen from above. Some manufacturers such as Mamiya also provided a reflex head to attach to the viewing screen to allow the camera to be held to the eye when in use. The advantage of a TLR was that it could be easily focussed using the viewing screen and that under most circumstances the view seen in the viewing screen was identical to that recorded on film. At close distances however, parallax errors were encountered and some cameras also included an indicator to show what part of the composition would be excluded.

Some TLR had interchangeable lenses but as these had to be paired lenses they were relatively heavy and did not provide the range of focal lengths that the SLR could support. Most TLRs used 120 or 220 film; some used the smaller 127 film.

Compact cameras

Instant camera
Main article: Instant camera

After exposure every photograph is taken through pinch rollers inside of the instant camera. Thereby the developer paste contained in the paper 'sandwich' distributes on the image. After a minute, the cover sheet just needs to be removed and one gets a single original positive image with a fixed format. With some systems it was also possible to create an instant image negative, from which then could be made copies in the photo lab. The ultimate development was the SX-70 system of Polaroid, in which a row of ten shots – engine driven – could be made without having to remove any cover sheets from the picture. There were instant cameras for a variety of formats, as well as adapters for instant film use in medium- and large-format cameras.

Subminiature camera
Subminiature spy camera

Cameras taking film significantly smaller than 35 mm were made. Subminiature cameras were first produced in the nineteenth century. The expensive 8×11 mm Minox, the only type of camera produced by the company from 1937 to 1976, became very widely known and was often used for espionage (the Minox company later also produced larger cameras). Later inexpensive subminiatures were made for general use, some using rewound 16 mm cine film. Image quality with these small film sizes was limited.

Folding camera
Main article: Folding camera

The introduction of films enabled the existing designs for plate cameras to be made much smaller and for the base-plate to be hinged so that it could be folded up compressing the bellows. These designs were very compact and small models were dubbed vest pocket cameras. Folding rollfilm cameras were preceded by folding plate cameras, more compact than other designs.

Box camera
Main article: Box camera

Box cameras were introduced as a budget level camera and had few if any controls. The original box Brownie models had a small reflex viewfinder mounted on the top of the camera and had no aperture or focusing controls and just a simple shutter. Later models such as the Brownie 127 had larger direct view optical viewfinders together with a curved film path to reduce the impact of deficiencies in the lens.

Rangefinder camera
Rangefinder camera, Leica c. 1936
Main article: Rangefinder camera

As camera a lens technology developed and wide aperture lenses became more common, rangefinder cameras were introduced to make focusing more precise. Early rangefinders had two separate viewfinder windows, one of which is linked to the focusing mechanisms and moved right or left as the focusing ring is turned. The two separate images are brought together on a ground glass viewing screen. When vertical lines in the object being photographed meet exactly in the combined image, the object is in focus. A normal composition viewfinder is also provided. Later the viewfinder and rangefinder were combined. Many rangefinder cameras had interchangeable lenses, each lens requiring its own range- and viewfinder linkages.

Rangefinder cameras were produced in half- and full-frame 35 mm and rollfilm (medium format).

Motion picture cameras
Main article: Movie camera
Further information: Digital movie camera

A movie camera or a video camera operates similarly to a still camera, except it records a series of static images in rapid succession, commonly at a rate of 24 frames per second. When the images are combined and displayed in order, the illusion of motion is achieved.[21]:4

Cameras that capture many images in sequence are known as movie cameras or as ciné cameras in Europe; those designed for single images are still cameras. However these categories overlap as still cameras are often used to capture moving images in special effects work and many modern cameras can quickly switch between still and motion recording modes.

A ciné camera or movie camera takes a rapid sequence of photographs on image sensor or strips of film. In contrast to a still camera, which captures a single snapshot at a time, the ciné camera takes a series of images, each called a "frame" through the use of an intermittent mechanism.

The frames are later played back in a ciné projector at a specific speed, called the "frame rate" (number of frames per second). While viewing, a person's eyes and brain merge the separate pictures to create the illusion of motion. The first ciné camera was built around 1888 and by 1890 several types were being manufactured. The standard film size for ciné cameras was quickly established as 35mm film and this remained in use until transition to digital cinematography. Other professional standard formats include 70 mm film and 16 mm film whilst amateurs film makers used 9.5 mm film, 8 mm film or Standard 8 and Super 8 before the move into digital format.

The size and complexity of ciné cameras varies greatly depending on the uses required of the camera. Some professional equipment is very large and too heavy to be hand held whilst some amateur cameras were designed to be very small and light for single-handed operation.

Professional video camera
Arri Alexa, a digital movie camera
Main article: Professional video camera
Further information: Video camera

A professional video camera (often called a television camera even though the use has spread beyond television) is a high-end device for creating electronic moving images (as opposed to a movie camera, that earlier recorded the images on film). Originally developed for use in television studios, they are now also used for music videos, direct-to-video movies, corporate and educational videos, marriage videos etc.

These cameras earlier used vacuum tubes and later electronic image sensors.

Camcorders
Main article: Camcorders

A camcorder is an electronic device combining a video camera and a video recorder. Although marketing materials may use the colloquial term "camcorder", the name on the package and manual is often "video camera recorder". Most devices capable of recording video are camera phones and digital cameras primarily intended for still pictures; the term "camcorder" is used to describe a portable, self-contained device, with video capture and recording its primary function.

Digital camera
Main article: Digital camera
Further information: Digital image, Digital imaging, Digital photography, Digital single-lens reflex camera, and Digital video

A digital camera (or digicam) is a camera that encodes digital images and videos digitally and stores them for later reproduction.[22] They typically use semiconductor image sensors.[23] Most cameras sold today are digital,[24] and digital cameras are incorporated into many devices ranging from mobile phones (called camera phones) to vehicles.

Digital and film cameras share an optical system, typically using a lens with a variable diaphragm to focus light onto an image pickup device.[25] The diaphragm and shutter admit the correct amount of light to the imager, just as with film but the image pickup device is electronic rather than chemical. However, unlike film cameras, digital cameras can display images on a screen immediately after being recorded, and store and delete images from memory. Most digital cameras can also record moving videos with sound. Some digital cameras can crop and stitch pictures and perform other elementary image editing.

Consumers adopted digital cameras in 1990s. Professional video cameras transitioned to digital around the 2000s–2010s. Finally movie cameras transitioned to digital in the 2010s.

The first camera using digital electronics to capture and store images was developed by Kodak engineer Steven Sasson in 1975. He used a charge-coupled device (CCD) provided by Fairchild Semiconductor, which provided only 0.01 megapixels to capture images. Sasson combined the CCD device with movie camera parts to create a digital camera that saved black and white images onto a cassette tape.[26]:442The images were then read from the cassette and viewed on a TV monitor.[27]:225 Later, cassette tapes were replaced by flash memory.

In 1986, Japanese company Nikon introduced an analog-recording electronic single-lens reflex camera, the Nikon SVC.[28]

The first full-frame digital SLR cameras were developed in Japan from around 2000 to 2002: the MZ-D by Pentax,[29] the N Digital by Contax's Japanese R6D team,[30] and the EOS-1Ds by Canon.[31] Gradually in the 2000s, the full-frame DSLR became the dominant camera type for professional photography.

On most digital cameras a display, often a liquid crystal display (LCD), permits the user to view the scene to be recorded and settings such as ISO speed, exposure, and shutter speed.[3]:6–7[32]:12

Camera phone
Smartphone with built-in camera spreads private images globally, c. 2013
Main article: Camera phone
Further information: Front-facing camera and Selfie

In 2000, Sharp introduced the world's first digital camera phone, the J-SH04 J-Phone, in Japan.[33] By the mid-2000s, higher-end cell phones had an integrated digital camera. By the beginning of the 2010s, almost all smartphones had an integrated digital camera.

gollark: A clear sign of heavpoot's manifestation within the noösphere.
gollark: Interesting.
gollark: Conceptual bees?
gollark: No, the person responsible for its *containment* is stopped anomalously by the "narf".
gollark: Did you READ the SCP?

See also

Footnotes
  1. Some photographers use handheld exposure meters independent of the camera and use the readings to manually set the exposure settings on the camera.[6]
  2. Film canisters typically contain a DX code that can be read by modern cameras so that the camera's computer knows the sensitivity of the film, the ISO.[7]]
  3. The older type of disposable flashbulb uses an aluminum or zirconium wire in a glass tube filled with oxygen. During the exposure, the wire is burned away, producing a bright flash.[6]

References
  1. Gustavson, Todd (2009). Camera: a history of photography from daguerreotype to digital. New York: Sterling Publishing Co., Inc. ISBN 978-1-4027-5656-6.
  2. Young, Hugh D.; Freedman, Roger A.; Ford, A. Lewis (2008). Sears and Zemansky's University Physics (12 ed.). San Francisco, California: Pearson Addison-Wesley. ISBN 978-0-321-50147-9.CS1 maint: ref=harv (link)
  3. London, Barbara; Upton, John; Kobré, Kenneth; Brill, Betsy (2002). Photography (7 ed.). Upper Saddle River, New Jersey: Prentice Hall. ISBN 978-0-13-028271-2.
  4. "technology of photography". Britannica Academic. Retrieved 13 December 2019.
  5. Lynne Warren, ed. (2006). "Camera: 35 mm". Encyclopedia of twentieth-century photography. New York: Routledge. ISBN 978-1-57958-393-4.
  6. "camera". Britannica Academic. Retrieved 12 December 2019.
  7. Lynne Warren, ed. (2006). "Camera: An Overview". Encyclopedia of twentieth-century photography. New York: Routledge. ISBN 978-1-57958-393-4.
  8. Columbia University (2018). "camera". In Paul Lagasse (ed.). The Columbia Encyclopedia (8 ed.). Columbia University Press.
  9. "How Cameras Work". How Stuff Works. Retrieved 13 December 2019.
  10. Rose, B (2007). "The Camera Defined". The Focal Encyclopedia of Photography. Elsevier. pp. 770–771. ISBN 978-0-240-80740-9. Retrieved 12 December 2019.
  11. "Motion-picture camera". Encyclopedia Britannica. Retrieved 12 December 2019.
  12. "Camera". World Encyclopedia. Philip's. 2004. ISBN 978-0-19-954609-1. Retrieved 12 December 2019.
  13. McHugh, Sean. "Understanding Camera Lenses". Cambridge in Colour. Archived from the original on 19 August 2013.
  14. Brown, Gary (April 2000). "How Autofocus Cameras Work". HowStuffWorks.com. Archived from the original on 30 September 2013.
  15. Wehner, Mike (19 October 2011). "Lytro camera lets you focus after shooting, now available for pre-order". Yahoo! News. Archived from the original on 22 October 2011.
  16. Roger Hicks (1984). A History of the 35 mm Still Camera. Focal Press, London & Boston. p. 137. ISBN 978-0-240-51233-4.
  17. Rudolph Lea (1993). Register of 35 mm SLR cameras. Wittig Books, Hückelhoven. p. 23. ISBN 978-3-88984-130-8.
  18. Michael R. Peres (2013), The Focal Encyclopedia of Photography, p. 779, Taylor & Francis
  19. "Canon Pellix Camera". Photography in Malaysia. Archived from the original on 16 October 2013.
  20. Parker, Bev. "Corfield Cameras – The Periflex Era". Wolverhampton Museum of Industry.
  21. Ascher, Steven; Pincus, Edward (2007). The Filmmaker's Handbook: A Comprehensive Guide for the Digital Age (3 ed.). New York: Penguin Group. ISBN 978-0-452-28678-8.
  22. Farlex Inc: definition of digital camera at the Free Dictionary; retrieved 7 September 2013
  23. Williams, J. B. (2017). The Electronics Revolution: Inventing the Future. Springer. pp. 245–8. ISBN 978-3-319-49088-5.
  24. Musgrove, Mike (12 January 2006). "Nikon Says It's Leaving Film-Camera Business". Washington Post. Retrieved 23 February 2007.
  25. MakeUseOf: How does a Digital Camera Work; retrieved 7 September 2013
  26. Gustavson, Todd (1 November 2011). 500 Cameras: 170 Years of Photographic Innovation. Toronto, Ontario: Sterling Publishing, Inc. ISBN 978-1-4027-8086-8.
  27. Hitchcock, Susan (editor) (20 September 2011). Susan Tyler Hitchcock (ed.). National Geographic complete photography. Washington, D.C.: National Geographic Society. ISBN 978-1-4351-3968-8.CS1 maint: extra text: authors list (link)
  28. Nikon SLR-type digital cameras, Pierre Jarleton
  29. The long, difficult road to Pentax full-frame The long, difficult road to Pentax full-frame, Digital Photography Review
  30. British Journal of Photography, Issues 7410-7422, 2003, p. 2
  31. Canon EOS-1Ds, 11 megapixel full-frame CMOS, Digital Photography Review
  32. Burian, Peter; Caputo, Robert (2003). National Geographic photography field guide (2 ed.). Washington, D.C.: National Geographic Society. ISBN 978-0-7922-5676-2.
  33. "Evolution of the Camera phone: From Sharp J-SH04 to Nokia 808 Pureview". Hoista.net. 28 February 2012. Retrieved 21 June 2013.

Further reading
  • Ascher, Steven; Pincus, Edward (2007). The Filmmaker's Handbook: A Comprehensive Guide for the Digital Age (3 ed.). New York: Penguin Group. ISBN 978-0-452-28678-8.
  • Frizot, Michel (January 1998). "Light machines: On the threshold of invention". In Michel Frizot (ed.). A New History of Photography. Koln, Germany: Konemann. ISBN 978-3-8290-1328-4.
  • Gernsheim, Helmut (1986). A Concise History of Photography (3 ed.). Mineola, New York: Dover Publications, Inc. ISBN 978-0-486-25128-8.
  • Hirsch, Robert (2000). Seizing the Light: A History of Photography. New York: McGraw-Hill Companies, Inc. ISBN 978-0-697-14361-7.
  • Hitchcock, Susan (editor) (20 September 2011). Susan Tyler Hitchcock (ed.). National Geographic complete photography. Washington, D.C.: National Geographic Society. ISBN 978-1-4351-3968-8.CS1 maint: extra text: authors list (link)
  • Johnson, William S.; Rice, Mark; Williams, Carla (2005). Therese Mulligan; David Wooters (eds.). A History of Photography. Los Angeles, California: Taschen America. ISBN 978-3-8228-4777-0.
  • Spira, S.F.; Lothrop, Jr., Easton S.; Spira, Jonathan B. (2001). The History of Photography as Seen Through the Spira Collection. New York: Aperture. ISBN 978-0-89381-953-8.
  • Starl, Timm (January 1998). "A New World of Pictures: The Daguerreotype". In Michel Frizot (ed.). A New History of Photography. Koln, Germany: Konemann. ISBN 978-3-8290-1328-4.
  • Wenczel, Norma (2007). "Part I – Introducing an Instrument" (PDF). In Wolfgang Lefèvre (ed.). The Optical Camera Obscura II Images and Texts. Inside the Camera Obscura – Optics and Art under the Spell of the Projected Image. Max Planck Institute for the History of Science. pp. 13–30. Archived from the original (PDF) on 2 April 2012.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.