Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [hpe]

96 questions
0
votes
0 answers

How to get SNMP on HP StoreOnce working?

I'm trying to add HPE StoreOnce 3640 Gen4 to the Nagios using SNMP v3 (other SNMP versions aren't supported in this device), and I'm stuck. It has the SW version 4.2.1-1942.21. This is not the first time configuring SNMP v3; I'v done it already on…
Nikita Kipriyanov
  • 8,033
  • 1
  • 21
  • 39
0
votes
1 answer

HP FlexFabric 10Gb 2-Port 534FLB Adapter and vSphere 6.5

we have an HP C3000 blade enclosure equipped with 2 ProLiant BL460c Gen8 each with 1x HP FlexFabric 10Gb 2-Port 534FLB Adapter and 1x HP Flex-10 10Gb 2-port 530M Adapter. On interconnect bay 1 we have a HP 6125G/XG Blade Switch. Our problem is that…
Mihai Magdalin
  • 3
  • 1
0
votes
2 answers

Monitoring processes/services Error by Zabbix over HPe Server

Would you mind sharing your experience with me? I monitor the ilo HP server with Zabbix Whenever there is a problem with the RAM or hard disk on the server, I receive a critical alarm through this OID. 1.3.6.1.4.1.232.6.1.3.0 It's just that, even if…
sasanalem
  • 1
  • 1
0
votes
0 answers

I want to reset a FC_HOST before the multipath tries to mount paths from it

I have an HPE SN1100Q 2port 16G HBA card on my hpe proliant gen10 server which is connected to HPE 3par storage direct attach. And some wierd stuff happening. Im using qla2xxx driver version 10.01.00.19-k which comes built-in in ubuntu 20.04. When…
Zekeriya Akgül
  • 123
  • 3
0
votes
0 answers

How Do I Apply Hotfixes with HPE Smart Update Manager?

I have recently installed HPE's SUM (Smart Update Manager) on a dedicated Linux VM using their provided RPM. I have been able to successfully load a node/physical server in to the interface, download and install an SPP baseline image, assign that…
Ken S.
  • 479
  • 5
  • 14
0
votes
0 answers

HPE SSD Slow performance

We are facing a extremely slow server. We are using SSD RAID 6 but cannot seem to find the cause why. After doing some research, it appears something related to the RAID and SSD. Server is HPE Gen 9 DL 360 Memory is 64GB RAID 6 SSD HPE Disks HPE…
Julien Angelo
  • 9
  • 1
0
votes
0 answers

HP SAS SSD drives are locked?

I have 2 HP SAS SSD drives I acquired as part of a bulk purchase of parts. One is HPE Model: DOPE1920S5xnNMRI and the other is HPE Model:ARFX1920S5xnMTRI I have 6 servers here with Raid Controllers. Most are older LSI cards like 9208's I have 1 Dell…
Chris P
  • 1
0
votes
0 answers

Adapter VMQ and processor groups in Hyper-V (using Switch Embedded Teaming) not working

I thought I had a pretty good understanding of virtual machine queuing but I am getting unexpected results that I do not quite understand. I have a system that has two processors in it with each processor having 22 logical cores (hyperthreading is…
Jacob
  • 31
  • 3
0
votes
0 answers

can't reboot Clonezilla after restoring

I use hpe dl20 gen10 server. When restoring img file from nfs, it successed. but it doesn't work after entering reboot/shutdown. it just displaying loading like ~embedded lom1~ how can i fix it?
KimTiger
  • 1
0
votes
1 answer

Issues with Ubuntu not booting on HPE Proliant ML30 Gen9

One of the server machines we use for database backup procedures is having issues and I ran out of ideas. At some point, it froze completely, and so it was forcefully rebooted. After that, the machine couldn't boot into the OS anymore. The machine…
Maximiliano Segovia
  • 1
  • 2
0
votes
1 answer

Fedora Server 34 crashes randomly every few minutes on HP ProLiant DL380e G8

I am unfortunately having a problem with my HP ProLiant DL380e G8 server running Fedora Server 34. I suspect these are memory errors or a DIMM being/going bad, however I'm not sure. Feedback is very welcome! I've ran journalctl -r, which returns the…
jonasclaes
  • 101
  • 7
0
votes
2 answers

P420i controller / 2 disks failed in RAID5 / RAW FS after parity initilization

We woke up this morning with 2 failed disks on RAID5 with a single hot-spare configuration. Hot-spare disk didn't replace any damaged disk maybe because there are 2 disks failed at the same time. However, I added two new disks and the parity is…
Maroon
  • 1
0
votes
1 answer

Is it possible to coonect the power to the sata power slot on a PCIE card from HPE ProLiant DL360p Gen8 server?

This is my first server and I never had one before... I recently need to use USB 3.0 for external HDD but there is none on this server, all USB 2.0. So I bought a "3 Ports USB 3.0 with 1Gbps Gigabit Ethernet Controller PCIe Expansion…
Arst
  • 101
  • 1
0
votes
0 answers

Connect extra 4 SAS HDDs to HPE Proliant Dle360 gen9

I have an HPE Proliant Dle360 gen9 configured with 1x 500w PS, 32GB ram, 1x 12 core Xeon cpu. At the moment its 4 front bays are occupied by 4 SAS HDDs. I want to replace them with 4 SAS SSDs and also reconnect the 4 SAS HDDs some other way. Do I…
Michael
  • 1
0
votes
0 answers

HP MicroServer N54L - HP logo light not lit

I bought an HP MicroServer N54L recently, and a few days ago, upgraded the RAM to 8GB from 4GB. When I booted it up again, the HP health LED lit up red briefly, then turned off again. I noted that the power LED was on, fans were spinning, but the HP…
archie
  • 1
  • 2
1 2 3 4
5
6 7