Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [hpe]

96 questions
0
votes
0 answers

Does the HPE ML350 support 970 Pro?

I am going in for an IO intensive application and have though of HPE ML350 for the purpose. I need to know if the NVMe SSDs are supported as boot drivers or not. Also if the drives are supported inherently supported or do I need to have any upgrade…
Utkarsh Narain Srivastava
  • 101
  • 1
0
votes
1 answer

Boot from SD card on Gen8 DL360

I'm attempting to get VMWare ESXi running from an SD card on an eBay purchased DL360 Gen8. I'm guessing that the firmware is probably out of date (iLO 4 - v2.50). The only options I have in boot are USB storage device (which I guess the internal SD…
Nick
  • 161
  • 1
  • 5
0
votes
1 answer

Physical volume for RAID missing in Ubuntu 16.04.4

I am trying to configure software RAID 1 on ubuntu 16.04.4, but the option “physical volume for RAID” is missing during the disk partitioning process.. Does anyone have a solution for that issue? Noting that the server that we are using is HP…
Anonymous
  • 1
  • 1
0
votes
1 answer

HP Proliant ML350 CPU Turbo

I am unable to get my CPU to go into Turbo ML350 with 1 x Xeon 4110, Windows Server 2016 Supposed turbo speed is 3ghz I have the server set "Static High Performance Mode" from the iLo, and "High Performance" in windows I run a 7z single core…
Patrick
  • 250
  • 1
  • 11
0
votes
1 answer

HP DL580 G7 "Temp 20" high, fans at 90%

We've recently purchased as used HP DL580 G7, and we noticed within a few hours of hookup that the fans were ramping up very high. I then proceeded to configure the iLO 3 to see what was causing the fan ramp, but the only temp sensor which reads…
Dr. Krieger
  • 1
  • 1
0
votes
1 answer

Pulling logs from HP Superdome 2

I'm trying to pull some event and hardware failure logs from HP Superdome 2 servers (through some scripts) for some analysis. I need this data with timestamp of the event/failure. I came across a few suggestions like IPMI, ILO and RedFish. IPMI…
Ankit Jaiswal
  • 103
  • 5
0
votes
1 answer

Unable to access Redfish on HPE Superdome 2

I'm trying to explore Redfish API using a Python client (python-ilorest-library) from HPE, however, it seems to be failing to connect with the RedFish service. I'm getting following error message: redfish.rest.v1.ServerDownOrUnreachableError: Server…
Ankit Jaiswal
  • 103
  • 5
0
votes
1 answer

Can't set HPE BootRom password on newer versions

Could someone please explain to me where can I find option to set BootRom password in newer Comware switch like HP 3600 v2? The menu looks like this: 1. Download application file to flash 2. Select application file to boot 3. Display all files in…
uQuad
  • 3
  • 2
0
votes
1 answer

What does this RSOD mean? - Trying to use Firepro S9100 in ML350PG8

I've bought two FirePro S9100 for my VDI enviroment. They work perfectly fine on a DL580G7. But within a ML350PG8 I got the following Red Screens Of Death, shortly after the first Booting, when it initialize the PCIe extansions. I had clearified,…
AN602
  • 21
  • 4
0
votes
1 answer

HPE SAS Expander card with breakout cables?

I have an old HP ML350 G6 server and I was wondering if I could buy a SAS expander card (this one 468406-B21) and buy a couple of SFF-8087 breakout cables and use it for my internal SATA drives instead of connecting it to a back plane? Or does the…
PatricF
  • 153
  • 2
  • 7
0
votes
1 answer

Bonding 802.3ad and HPE switches: ingress and egress traffic not in the same interface

I have LACP configured between my server (802.3ad, layer2, so based on source MAC and destination MAC) and my switch. Recently I saw that ingress traffic for a network peer is using one interface (eth3) while egress, for the same network peer, is…
Thomas Martin
  • 3
  • 2
0
votes
2 answers

HPE ProLiant XL270d Gen9 - Ubuntu remote login into shell after Installation

I have installed ubuntu-16.04.1-server-amd64 on a HPE ProLiant XL270d Gen9. The installation is fine, it is booting correctly. Since I'm not located nearby the data center, therefore, I installed the operating system via iLO remote console…
FullPatrickJoin
  • 1
  • 2
0
votes
1 answer

MSA 2040 SAN - duplicate virtual volume

Good Afternoon guys, I have a MSA 2040 SAN for storage. My problem is that when I create a virtual volume and map it to a server, the server shows 2 volumes on the disk management. I've tried, many times, to delete the virtual volume and re-map it…
user412122
  • 11
0
votes
1 answer

New ProLiant ML10 v2 won't power on

I just unpacked a brand new HP (HPE now I guess) ProLiant ML10 v2 Tower Server System i3-4150 3.5 GHz. It responded as expected to a press and release of the power-on button once, but the system became unresponsive after I waited for it to complete…
Kevin Ford The Submariner
  • 121
  • 1
  • 2
  • 5
0
votes
0 answers

HPE SSA : replace both HDD & bay in a logical volume

We have a HPE DL380p G8 server with smart array P420i in Slot 0. There are 4 drives in a RAID-10 array and 3 drives in a RAID-5 array. There is no spare drive. Yesterday one of the drives in RAID-10 array (in 1I:2:1) failed and we replaced it with…
Nabi
  • 1
  • 1
1 2 3
4
5 6 7