Questions tagged [hpe]
96 questions
2
votes
3 answers
Couldn't mark volume as bootable in hpacucli (SmartArray P400i)
I've got HP ProLiant G5 with hardware controller HP SmartArray P400i. I created logical drive from 4 HDD and installed OS, but i don't know hot to mark this volume as boot. Here's the output of hpacucli in HP SSA disk:
=> ctrl slot=0 modify…
![](../../users/profiles/435202.webp)
kamish
- 31
- 6
2
votes
1 answer
Mellanox connectX-2 - compatibility
We want to upgrade our network to 10Gbits.
On eBay you find a lot of old HP Mellanox connectX-2 SFP+ cards which are capable of 10Gbit/s.
We want to give our server one of them and connect it to a HPE OfficeConnect 1950 Switch which is also capable…
![](../../users/profiles/410603.webp)
ForJ9
- 145
- 4
2
votes
2 answers
RAM compatibility for the HP Proliant DL320e Gen8 v2
I've got a handful of servers to assemble. I've got a few HP Proliant DL320e Gen8 V2 servers with the 2 LFF hard drive slots and 4 RAM slots.
It came with a stick of PC3 12800E 11-13-E3 RAM, and I'm not sure what those last couple of things are…
![](../../users/profiles/288836.webp)
kayleeFrye_onDeck
- 183
- 1
- 9
2
votes
3 answers
how to do warranty lookup of HPE HDDs?
I have had this problem a lot, and I was wondering if anyone knows the way to do this. WHAT information do I need to get my warranty lookup for HP(E) Harddrives for proliant servers. so. if you go to this…
![](../../users/profiles/102402.webp)
Sverre
- 723
- 2
- 12
- 23
2
votes
2 answers
Replacing HP ML30 G10 Processor
Dears,
I currently have the HPE ML30 G10 with Intel® Xeon® E-2124 processor installed in it. I wonder if it is possible to replace the processor with Intel® Xeon® E-2288G or Intel® Xeon® E-2236 without changing/replacing any other components inside…
![](../../users/profiles/531774.webp)
Aboodnet
- 63
- 5
2
votes
0 answers
Smart Array P420i Permanently replace Predictive Failure Disk with Spare
I have a Smart Array P420i configured as below:
Smart Array P420i in Slot 0 (Embedded)
Array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (838.1 GB, RAID 5, OK)
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SAS HDD, 300 GB, OK)
…
![](../../users/profiles/429231.webp)
5Lights
- 21
- 1
1
vote
1 answer
HPE J9265A 6600-24XG switches & java for the web interface?
Does the latest firmware for HPE J9265A 6600-24XG switches still require java for the web interface?
![](../../users/profiles/553982.webp)
JPoole
- 23
- 3
1
vote
1 answer
Using 8gb 2RX4 PC3- 10600R 1333MHZ DDR3 on DL380e Gen8 Server?
we are planning for a memory upgrade of our hp ProLiant 380e gen8 server.i've found a refurbish memory on amazon, since we have a limited budget we opted out to buy a refurbish units instead of a new one. we found a seller on Amazon that offers an…
![](../../users/profiles/548624.webp)
Romnick Nitro
- 11
- 2
1
vote
0 answers
HP Proliant DL380 Gen9 - - Logical Drive 1 has failed Re-enable failed logical
I have a HP Proliant DL360 Gen9 Server, everything working fine. but suddenly server is not bootable, booting time we got three errors.
listed below.
313-HP smart storage battery 1 failure - Battery shutdown event code: 0x0400.
2.Embedded Storage…
![](../../users/profiles/543318.webp)
GOKUL R
- 11
- 1
- 2
1
vote
1 answer
Unable to install any Operating System on HPE ProLiant ML10 Gen9
I have been unable to install any OS on this server.
It will bring up a grub or choice menu, but hangs after that. I just tried the ClearOS install, downloaded from the HPE link to ClearOS, it goes as far as the choice on what to do, then confirm,…
![](../../users/profiles/313466.webp)
cdfriesen
- 11
- 1
1
vote
2 answers
How to add drives to HPE raid and convert to raid 5
This is similar to this question:
HP G8 migrate RAID0 to RAID1 with CLI commands
But different enough that I think it is worth asking as a new question.
I have a Gen 10 HPE server with the P408i-a RAID controller.
Currently it just has a single…
![](../../users/profiles/427704.webp)
Michael Firth
- 131
- 1
- 8
1
vote
2 answers
Different HPE RAM for Intel & AMD servers
I have a HPE ProLiant DL325 G10 server and the specs for it state that HPE 838089-B21 RAM applies to it. The DL360/Intel servers accept HPE 835955-B21 RAM, which is about $45 cheaper. Spec wise both RAM is exactly the same. The only thing that…
![](../../users/profiles/127415.webp)
Aco Strkalj
- 79
- 1
- 5
1
vote
2 answers
RAM compatibility for HPE servers
I ordered a HPE ProLiant DL325 G10 server. It comes with a AMD EPYC 7401P and 32GB (2x16GB) DDR4 2666MT/s 2Rx8 RDIMMs. I'd like to add more RAM to it. I'm wondering if I can buy non-HPE branded RAM and save a bunch of money and have no…
![](../../users/profiles/127415.webp)
Aco Strkalj
- 79
- 1
- 5
1
vote
1 answer
Roaming hardrives on a HPE Proliant DL380 Gen 9 24FF exact copy?
HPE Proliant DL380 Gen 9 24FF is faulting due to a flashin read light. The ILM files below indicate that the network port is faulty (attached to the system port). The trouble shooting guides recommend switching the system board.
If we have a second…
![](../../users/profiles/156472.webp)
DavyGravy
- 159
- 1
- 7
1
vote
2 answers
DL360 G6 dual CPU endless boot
I have a HP ProLiant DL360 G6 with a Xeon X5570 and 32GB (2x16GB) 4R RAM, which works just as expected, but whenever I try to add another X5570 to the other socket (making it a dual CPU machine) it gets stuck in an endless boot loop.
I have tried…
![](../../users/profiles/395725.webp)
Odecif
- 15
- 8