Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [hpe]

96 questions
6
votes
5 answers

What is the NAND used for in the HPE ProLiant DL360p Gen8?

I have a server with the error: 'iLO Self-Test reports a problem with: Embedded Flash/SD-CARD' ' Embedded media manager failed initialization ' HPE advises the following: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04996097 I've…
True
  • 61
  • 1
  • 1
  • 4
6
votes
6 answers

Windows Server 2008 R2 shut itself down for no apparent reason

Our new server has been running basically fine for a few months. Twice, however, it shut itself down for no apparent reason. The most recent occurrence was at 11:41pm a few days ago. The event logs show nothing untoward, and the last entry is a…
boot13
  • 185
  • 1
  • 1
  • 9
4
votes
3 answers

SAS RAID5 Disk failure, replacement enclosure not matching

A SAS disk in RAID5 array failed yesterday and I'm about to replace it, however I noticed the front enclosure wasn't matching the rest of the disks. The array consists of 300GB 10K SAS disks with the left enclosure. I found a 300GB 10K SAS disk with…
MKZ
  • 240
  • 3
  • 9
3
votes
0 answers

SAS Expanders and Hp Smart Array HBA mode

I've recently purchased an HP DL360p G8 with a Smart Array P420i 1GB storage controller. As I'm using FreeNas, I've switched the controler to HBA mode. I was planning to buy an HP SAS expander, this one:…
Ralms
  • 196
  • 6
3
votes
3 answers

Package temperature above threshold, cpu clock throttled

I have 2 HPE Proliant DL360 Gen10 servers that are configured nearly the same. They both run CentOS 7.5. The only differences are that one has newer firmware and kernel, in an attempt to fix this problem. dmesg is reporting the following…
Kerry Knopp
  • 43
  • 1
  • 4
3
votes
1 answer

Is part number a crucial factor when purchasing server hard-drive

I'm doing some research on HP HDD SAS 900G 6G/s 10K-RPM 2.5" hard-drives for a purchase order. On Amazon or Ebay there are all kinds of part numbers and/or spare numbers for example 619291-B21 619463-001 619286-004 which add to my confusion. My…
user4838962
  • 231
  • 2
  • 14
3
votes
1 answer

HPE 1.92TB SATA 6G Mixed Use SFF SSD very slow compared to SAS HDD HP disks

In below screenshot, I benchmarked 3 machines, 4 Drives. my main production based on DL580, HPE 1.92TB SATA 6G Mixed Use SFF SSD RAID 1. MySQL insert time of 1 million rows is ~ 30 seconds in the SSD, while its ~ 15 seconds in the ImageServer 20TB…
Jawad Al Shaikh
  • 254
  • 1
  • 3
  • 15
3
votes
1 answer

RAID configuration HPE Proliant DL360 G6

I've got an old server and I would like some advice on the RAID configuration. I have 8 disks of 300GB. And I'm not sure which setup is more desirable. 2x RAID1 (os: hyper-V) 6x RAID5 (VMs) or 8x RAID5 If I choose for 8x RAID5, will the host OS…
MKZ
  • 240
  • 3
  • 9
3
votes
1 answer

Drive allocation in a RAID 50 array on a HPE DL380 G9

I have a DL380 G9 with 12x8TB 3.5" disks: | 1 | 4 | 7 | 10 | | 2 | 5 | 8 | 11 | | 3 | 6 | 9 | 12 | In the Smart Array Controller GUI, if I select all 12 disks and assign them to a RAID 50 array, how will the controller divide the disks for the RAID…
rst-2cv
  • 151
  • 1
  • 1
  • 8
2
votes
1 answer

HP iLO 4 firmware update failure, stuck on "Checking HP Secure Digital Signature" and 1% flash progress. Stuck on firmware 1.51, ProLiant DL360p Gen8

I am trying to update the iLO 4 firmware on a HP ProLiant DL360p Gen8. It's a VMHost, running VMware ESXi, 5.1.0, 2323236. The VM's it runs are Windows Server 2008 R2 Standard. It's currently running iLO Firmware v1.5.1. I am trying to update it…
Protonus
  • 41
  • 2
  • 6
2
votes
2 answers

In hponcfg for iLO config, what's the difference between "YES" and "LOM" for "SHARED_NETWORK_PORT"?

If you get your iLO network settings using hponcfg for an HPe server - there is a setting called SHARED_NETWORK_PORT - with values of NO, YES, LOM, or FlexibleLOM. I am trying to determine what the actual difference is between the values of YES and…
Protonus
  • 41
  • 2
  • 6
2
votes
2 answers

Proliant ML10 Gen9 bricked, and no DP

Been struggling with this new server for the past month. It's cheap, with no iLO, and seems not to have any support entitlement. The latest issue is that I need to change from a DVI monitor to a DisplayPort one. The motherboard only has DP outputs,…
EML
  • 393
  • 3
  • 12
2
votes
1 answer

Install the HPE System Management Homepage on Windows Server 2016 (HPE DL 380 G10)

I have an new HPE ProLiant DL380 G10 server with Windows Server 2016 on it. As i was used to i: downloaded the HPE SPP (Service Pack for ProLiant) in Version 2018.03 and first updated the Firmware, than build a RAID, installed the OS…
frupfrup
  • 853
  • 3
  • 13
  • 27
2
votes
2 answers

Local login fails with HPE RESTful Interface Tool "ilorest"

We have a problem with an HPE Proliant Gen 10 Server. When trying to login to iLO 5 locally from within a Linux OS via HPE's RESTful Interface Tool "ilorest", we get the message "Error: Could not authenticate. Invalid credentials, or bad…
Jens Moser
  • 83
  • 2
  • 6
2
votes
1 answer

Centos 7.1 GUI install fail after driver B140i

Im trying to install Centos 7.1 on a HPE DL160 GEN9 using the smart array controller. Im following the official manual (HPE Dynamic Smart Array B140i RAID Controller User Guide) after the driver setup via USB the install fails and show a blackscreen…
sebastiannot
  • 23
  • 1
  • 4
1
2 3 4 5 6 7