USS LST-946

USS LST-946 was an LST-542-class tank landing ship in the United States Navy. Like many of her class, she was not named and is properly referred to by her hull designation.

USS LST-946 under way in San Francisco Bay after passing under the Golden Gate Bridge, c. early 1946 with LCT-1376 on board.
History
United States
Name: LST-946
Builder: Bethlehem-Hingham Shipyard, Hingham, Massachusetts
Yard number: 3416[1]
Laid down: 15 August 1944
Launched: 20 September 1944
Commissioned: 12 October 1944
Decommissioned: 25 June 1946
Stricken: 31 July 1946
Identification:
Honors and
awards:		 1 × battle star
Fate: sold for operation, 25 May 1948
Status: Fate unknown
General characteristics [2]
Class and type: LST-542-class tank landing ship
Displacement:
  • 1,625 long tons (1,651 t) (light)
  • 4,080 long tons (4,145 t) (full (seagoing draft with 1,675 short tons (1,520 t) load)
  • 2,366 long tons (2,404 t) (beaching)
Length: 328 ft (100 m) oa
Beam: 50 ft (15 m)
Draft:
  • Unloaded: 2 ft 4 in (0.71 m) forward; 7 ft 6 in (2.29 m) aft
  • Full load: 8 ft 3 in (2.51 m) forward; 14 ft 1 in (4.29 m) aft
  • Landing with 500 short tons (450 t) load: 3 ft 11 in (1.19 m) forward; 9 ft 10 in (3.00 m) aft
  • Limiting 11 ft 2 in (3.40 m)
  • Maximum navigation 14 ft 1 in (4.29 m)
Installed power:
Propulsion:
Speed: 11.6 kn (21.5 km/h; 13.3 mph)
Range: 24,000 nmi (44,000 km; 28,000 mi) at 9 kn (17 km/h; 10 mph) while displacing 3,960 long tons (4,024 t)
Boats & landing
craft carried:		 2 x LCVPs
Capacity: 1,600–1,900 short tons (3,200,000–3,800,000 lb; 1,500,000–1,700,000 kg) cargo depending on mission
Troops: 16 officers, 147 enlisted men
Complement: 13 officers, 104 enlisted men
Armament:
Service record
Part of: LST Flotilla 21
Operations: Assault and occupation of Okinawa Gunto (26 March–7 May 1945)
Awards:

Construction

LST-946 was laid down on 15 August 1944, at Hingham, Massachusetts, by the Bethlehem-Hingham Shipyard; launched on 20 September 1945; and commissioned on 12 October 1945,[3] Lieutenant (junior grade) Donald A. Schlarbaum, USN, in command.[2]

Service history

During World War II LST-946 was assigned to the Asiatic-Pacific theater and participated in the assault and occupation of Okinawa Gunto from March through May 1945.[3]

Following the war, she performed occupation duty in the Far East until mid-February 1946. She returned to the United States and was decommissioned on 25 June 1946, and struck from the Navy list on 31 July, that same year. On 25 May 1948, the ship was sold to the California Co., for operation.[3]

Awards

LST-946 earned one battle star for World War II service.[3]

Notes

    Citations
    1. Bethlehem-Hingham 2011.
    2. Navsource 2015.
    3. DANFS.

    Bibliography

    Online resources

    • "LST-946". Dictionary of American Naval Fighting Ships. Naval History and Heritage Command. Retrieved 3 June 2017. This article incorporates text from this source, which is in the public domain.
    • "Bethlehem-Hingham, Hingham MA". www.ShipbuildingHistory.com. 11 August 2011. Retrieved 3 June 2017.
    • "USS LST-946". Navsource.org. 6 November 2015. Retrieved 3 June 2017.
    gollark: There are some important considerations here: it should be able to deal with damaged/partial files, encryption would be nice to have (it would probably work to just run it through authenticated AES-whatever when writing), adding new files shouldn't require tons of seeking, and it might be necessary to store backups on FAT32 disks so maybe it needs to be able of using multiple files somehow.
    gollark: Hmm, so, designoidal idea:- files have the following metadata: filename, last modified time, maybe permissions (I may not actually need this), size, checksum, flags (in case I need this later; probably just compression format?)- each version of a file in an archive has this metadata in front of it- when all the files in some set of data are archived, a header gets written to the end with all the file metadata plus positions- when backup is rerun, the system™ just checks the last modified time of everything and sees if its local copies are newer, and if so appends them to the end; when it is done a new header is added containing all the files- when a backup needs to be extracted, it just reads the end and decompresses stuff at the right offset
    gollark: I don't know what you mean "dofs", data offsets?
    gollark: Well, this will of course be rustaceous.
    gollark: So that makes sense.


    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.