Tōbu Koizumi Line

The Tobu Koizumi Line (東武小泉線, Tōbu Koizumi-sen), operated by the private railway operator Tobu Railway, connects Tatebayashi Station located in Tatebayashi, Gunma to Nishi-Koizumi Station located in Ōizumi, Gunma as well as Higashi-Koizumi Station in Ōizumi town to Ōta Station in Ōta, Gunma Japan.

Tobu Koizumi Line
TI
A Tobu Koizumi Line down train between Tatebayashi and Narushima stations in March 2008
Overview
Native name東武小泉線
TypeCommuter rail
LocaleGunma Prefecture
TerminiTatebayashi
Nishi-Koizumi/Higashi-Koizumi
Operation
Opened12 March 1917
OwnerTobu Railway
Technical
Track gauge1,067 mm (3 ft 6 in)
Electrification1,500 V DC, overhead catenary

Stations
No. Name Connections Location
TI-10 Tatebayashi
Tatebayashi Gunma
TI-41 Narushima
TI-42 Hon-Nakano Ōra
TI-43 Shinozuka
TI-44 Higashi-Koizumi TI Tobu Koizumi Line for Ōta Ōizumi
TI-45 Koizumimachi
TI-46 Nishi-Koizumi
The line splits at Higashi-Koizumi.
TI-44 Higashi-Koizumi TI Tobu Koizumi Line
(For Tatebayashi/Nishi-Koizumi)		 Ōizumi Gunma
TI-47 Ryūmai Ōta
TI-18 Ōta

Abandoned stations
  • Shin-Koizumi Station - Sengoku-Kashi Station
  • Kobugannon Station (between Higashi-Koizumi Station and Shinozuka Station)

History

The first section of the line from Tatebayashi Station to Koizumimachi Station was opened for passenger service on March 12, 1917, operated by the Chūgen Railway, which was purchased by Tobu Railway company in 1937.

The 3 km Sengokugashi Freight Line (仙石河岸貨物線) from Koizumimachi Station to Sengokugashi Station (仙石河岸駅) opened on April 13, 1939, as a freight-only branch line. Passenger services as far as Nishi-Koizumi commenced in 1941.

In 1941, Higashi-Koizumi Station to Ōta Station section opened on June 1, 1941, to service the Nakajima Aircraft Company Ōta and Koizumi plants. The lines were electrified in 1943.

The Nishi-Koizumi to Sengoku freight branch closed in 1976, and freight services ceased on the line in 1996.

gollark: Bit bland.
gollark: (Spatial IO is storing blocks and stuff inside spatial storage drives)
gollark: I think the base is 1.25kRF/block and then it's raised to the power of 1.35.
gollark: ```spatialio { D:spatialPowerExponent=1.35 D:spatialPowerMultiplier=1250.0 I:storageDimensionID=2 I:storageProviderID=-11}```Power usage, meet config editor.
gollark: See, you need giant banks of dense energy cells to power big spatial frames, and why not only use *one*?

References

This article incorporates material from the corresponding article in the Japanese Wikipedia.

  • Ryōzō Kawashima (2004). Zenkoku Tetsudo Jijo Daikenkyu. Tōkyō: Sōshisha. ISBN 4-7942-1291-7.
  • Yukiyasu Sugizaki (2000). Ekisha Sai-hakken. Tōkyō: JTB. ISBN 4-533-03675-9.
  • Shunzō Miyawaki (1997). Tetsudo Haisenato o Aruku. Tōkyō: JTB. ISBN 4-533-02743-1.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.