RapidCAD

RapidCAD is a specially packaged Intel 486DX and a dummy floating point unit (FPU) designed as pin-compatible replacements for an Intel 80386 processor and 80387 FPU. Because the i486DX has a working on-chip FPU, a dummy FPU package is supplied to go in the Intel 387 FPU socket. The dummy FPU is used to provide the FERR signal, necessary for compatibility purposes.

Despite being able to execute instructions in the same number of cycles as an i486DX, integer performance on RapidCAD suffers due to the absence of level 1 cache and the bottleneck of the 386 bus. RapidCAD offers minimal improvement in integer performance over a 386DX (typically 10%, at most 35%), but provides substantial improvement in floating point operations (up to 80% faster) for which it was marketed. Floating point performance is mostly improved by moving the FPU onto the CPU core.

  • Intel RapidCAD-1
  • Intel RapidCAD-2

Technical specifications

Intel RapidCAD-1

  • Package: 132-Pin CPGA
  • CPU clock: 25/33 MHz
  • Transistors: 800,000
  • Process: CHMOS 0.8 µm
  • Voltage: 5 V
  • sSpec: SZ624

Intel RapidCAD-2

  • Package: 68-Pin CPGA
  • CPU clock: 25/33 MHz
  • Transistors: 275,000
  • Process: CHMOS
  • Voltage: 5 V
  • sSpec: SZ625
gollark: Android is designed for phones, and in my opinion not really designed all that well.
gollark: *GNU/*Linux, and that's mostly just a DE problem.
gollark: Yes, exactly.
gollark: GNU/Linux would also be generally a lot nicer.
gollark: I mean, Arch seems more reliable than my Android phone honestly.

See also

This article is based on material taken from the Free On-line Dictionary of Computing prior to 1 November 2008 and incorporated under the "relicensing" terms of the GFDL, version 1.3 or later.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.