Brooklyn Bridge (Sydney)

The Brooklyn Bridge is a concrete girder bridge that carries the Pacific Motorway (M1) across the Hawkesbury River between Kangaroo Point to Mooney Mooney Point, located 35 kilometres (22 mi) north of Sydney in New South Wales, Australia. The bridge comprises a dual carriageway with three lanes in each direction of motorway grade-separated conditions.

For other uses, see Brooklyn Bridge (disambiguation).

Brooklyn Bridge
The Brooklyn Bridge, pictured to the left carries the Pacific Motorway.
The Peats Ferry Bridge on the right carries the Pacific Highway, as they both cross the Hawkesbury River
Coordinates33°32′19″S 151°11′57″E
CarriesPacific Motorway
CrossesHawkesbury River
LocaleBrooklyn, Sydney, New South Wales, Australia
BeginsKangaroo Point (south)
EndsMooney Mooney Point (north)
Named forBrooklyn
OwnerRoads & Maritime Services
Followed byPeats Ferry Bridge
Characteristics
DesignGirder bridge
MaterialConcrete
Total length600 metres (1,969 ft)
No. of lanes3 northbound and 3 southbound
History
DesignerNSW Department of Main Roads
Opened
  • August 1973 (1973-08) (Stage 1)
  • October 1973 (1973-10) (Stage 2)
ReplacesPeats Ferry Bridge:
(Old Pacific Highway  – concurrent use)
References
[1][2]

The adjacent Peats Ferry Bridge carries the Pacific Highway (B83) across the Hawkesbury River in a single carriageway with one lane in each direction in state highway conditions. The Peats Ferry Bridge permits the carriage of pedestrian and bicycles; not permitted on the Brooklyn Bridge. Both bridges are maintained by NSW Roads & Maritime Services.

History

This bridge was built to connect the sections of the Sydney-Newcastle Freeway immediately north and south of the Hawkesbury River. The section north of the river as far as Mount White was opened in December 1965, and the adjacent freeway section south of the river was opened as far south as Berowra in December 1968. Between 1968 and 1973 freeway traffic was required to rejoin the Pacific Highway in either direction and use the Peats Ferry Bridge (opened in 1945) to cross the river.

It was opened in two stages. The three northbound lanes were opened to traffic in August 1973, and the resulting changes to traffic arrangements (whereby northbound traffic no longer had to join the Pacific Highway to use the adjoining Peats Ferry Bridge to cross the Hawkesbury then diverge to where the freeway recommenced north of the river) allowed the approaches at either end of the three southbound lanes to be completed in October 1973, to bring the full width of the bridge into use.

Description

The bridge is founded on rock at up to 85 metres (279 ft) below water level and the deck is on a falling gradient from 21 metres (69 ft) above water level at the southern bank to seven metres (twenty-three feet) at the northern bank. The bridge is 600 metres (1,969 ft) long, and was the first bridge in the world to be built of open steel trough girders.[3]

gollark: .
gollark: Python lambdas are too long for anything interesting;
gollark: Rust would be easier but it has 128-bit ints at most.
gollark: Anyway, I can probably define bigger numbers, but... not in 32 bytes?
gollark: It's exponentiation, not tetration.

See also

References
  1. "Crossing the Hawkesbury by Road". History Services Blog. History Services NSW. 17 April 2012. Retrieved 26 November 2016.
  2. "Bridging the Hawkesbury River: Hornsby to Gosford" (PDF). NSW Roads and Traffic Authority. Government of New South Wales. March 2005. Retrieved 26 November 2016.
  3. Main Roads. 39. pp. 52–54. in "Crossing the Hawkesbury by Road". History Services Blog. 17 April 2012. Retrieved 27 March 2020.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.