Romanesque Revival architecture

Romanesque Revival (or Neo-Romanesque) is a style of building employed beginning in the mid-19th century[1] inspired by the 11th- and 12th-century Romanesque architecture. Unlike the historic Romanesque style, however, Romanesque Revival buildings tended to feature more simplified arches and windows than their historic counterparts.

West facade of Speyer Cathedral, by Heinrich Hübsch (left). The yellow tone of the 19th-century addition contrasts with the reddish tone of the surviving medieval parts behind it.

An early variety of Romanesque Revival style known as Rundbogenstil ("Round-arched style") was popular in German lands and in the German diaspora beginning in the 1830s.[2] By far the most prominent and influential American architect working in a free "Romanesque" manner was Henry Hobson Richardson. In the United States, the style derived from examples set by him are termed Richardsonian Romanesque, of which not all are Romanesque Revival.[3]

Romanesque Revival is also sometimes referred to as the "Norman style" or "Lombard style", particularly in works published during the 19th century after variations of historic Romanesque that were developed by the Normans and Lombards, respectively. Like its influencing Romanesque style, the Romanesque Revival style was widely used for churches, and occasionally for synagogues such as the New Synagogue of Strasbourg built in 1898, and the Congregation Emanu-El of New York built in 1929.[4] The style was quite popular for university campuses in the late 19th and early 20th century, especially in the United States and Canada; well known examples can be found at the University of California, Los Angeles, University of Southern California, Tulane University, University of Denver, University of Toronto, and Wayne State University.

The Romanesque Revival or Norman Revival in Great Britain
Culzean Castle by Robert Adam, 1771
See also: Romanesque Revival architecture in the United Kingdom

The development of the Norman revival style took place over a long time in the British Isles, starting with Inigo Jones's refenestration of the White Tower of the Tower of London in 1637–38 and work at Windsor Castle by Hugh May for Charles II, but this was little more than restoration work. In the 18th century, the use of round arched windows was thought of as being Saxon rather than Norman, and examples of buildings with round arched windows include Shirburn Castle in Oxfordshire, Wentworth in Yorkshire, and Enmore Castle in Somerset. In Scotland the style started to emerge with the Duke of Argyl's castle at Inverary, started in 1744, and castles by Robert Adam at Culzean (1771), Oxenfoord (1780–82), Dalquharran, (1782–85) and Seton Palace, 1792. In England James Wyatt used round arched windows at Sandleford Priory, Berkshire, in 1780–89 and the Duke of Norfolk started to rebuild Arundel Castle, while Eastnor Castle in Herefordshire was built by Robert Smirke between 1812 and 1820.[5]

At this point, the Norman Revival became a recognisable architectural style. In 1817, Thomas Rickman published his An Attempt to Discriminate the Styles of English Architecture from the Conquest To the Reformation. It was now realised that 'round-arch architecture' was largely Romanesque in the British Isles and came to be described as Norman rather than Saxon.[6] The start of an "archaeologically correct" Norman Revival can be recognised in the architecture of Thomas Hopper. His first attempt at this style was at Gosford Castle in Armagh in Ireland, but far more successful was his Penrhyn Castle near Bangor in North Wales. This was built for the Pennant family, between 1820 and 1837. The style did not catch on for domestic buildings, though many country houses and mock castles were built in the Castle Gothic or Castellated style during the Victorian period, which was a mixed Gothic style.[7]

However, the Norman Revival did catch on for church architecture. Thomas Penson, a Welsh architect, would have been familiar with Hopper's work at Penrhyn, who developed Romanesque Revival church architecture. Penson was influenced by French and Belgian Romanesque Revival architecture, and particularly the earlier Romanesque phase of German Brick Gothic. At St David's Newtown, 1843–47, and St Agatha's Llanymynech, 1845, he copied the tower of St. Salvator's Cathedral, Bruges. Other examples of Romanesque revival by Penson are Christ Church, Welshpool, 1839–1844, and the porch to Langedwyn Church. He was an innovator in his use of Terracotta to produce decorative Romanesque mouldings, saving on the expense of stonework.[8] Penson's last church in the Romanesque Revival style was Rhosllannerchrugog, Wrexham 1852[9]

The Romanesque adopted by Penson contrasts with the Italianate Romanesque of other architects such as Thomas Henry Wyatt, who designed Saint Mary and Saint Nicholas Church, in this style at Wilton, which was built between 1841 and 1844 for the Dowager Countess of Pembroke and her son, Lord Herbert of Lea.[10] During the 19th century, the architecture selected for Anglican churches depended on the churchmanship of particular congregations. Whereas high churches and Anglo-Catholic, which were influenced by the Oxford Movement, were built in Gothic Revival architecture, low churches and broad churches of the period were often built in the Romanesque Revival style. Some of the later examples of this Romanesque Revival architecture is seen in Non-conformist or Dissenting churches and chapels. A good example of this is by the Lincoln architects Drury and Mortimer, who designed the Mint Lane Baptist Chapel in Lincoln in a debased Italianate Romanesque revival style in 1870.[11] After about 1870 this style of Church architecture in Britain disappears, but in the early 20th century, the style is succeeded by Byzantine Revival architecture.

  • Gosford Castle, Armagh by Thomas Hopper
  • Penrhyn Castle, by Thomas Hopper, 1820–1837
  • Church of St Agatha, Llanymynech, Romanesque Tower by Thomas Penson
  • Mint Street Baptist Church, Lincoln, 1870
  • St Mary and St Nicholas Church, Wilton, Wiltshire
  • Russian Patriarchal Orthodox cathedral Kensington London 1848–49 and 1891–92

Canada

Two of Canada's provincial legislatures, the Ontario Legislative Building in Toronto and the British Columbia Parliament Buildings in Victoria, are Romanesque Revival in style.

University College, one of seven colleges at the University of Toronto, is an example of the Romanesque Revival style.[12] Construction of the final design began on 4 October 1856.[13]

Sweden

The Vasa Church in Gothenburg, Sweden, is another prime example of the Neo-Romanesque style of architecture.

United States

The Church of the Pilgrims—now the Maronite Cathedral of Our Lady of Lebanon—in Brooklyn Heights, Brooklyn, designed by Richard Upjohn and built 1844–46, is generally considered the first work of Romanesque Revival architecture in the United States.[14] It was soon followed by a more prominent design for the Smithsonian Institution Building in Washington, DC, designed by James Renwick, Jr. and built 1847–51. Renwick allegedly submitted two proposals to the design competition, one Gothic and the other Romanesque in the style. The Smithsonian chose the latter, which was based on designs from German architecture books.[15] Several concurrent forces contributed to the popularizing of the Romanesque Revival in the United States. The first was an influx of German immigrants in the 1840s, who brought the style of the Rundbogenstil with them.[15] Second, a series of works on the style was published concurrently with the earliest built examples. The first of these, Hints on Public Architecture, written by social reformer Robert Dale Owen in 1847–48, was prepared for the Building Committee of the Smithsonian Institution and prominently featured illustrations of Renwick's Smithsonian Institution Building. Owen argued that Greek Revival architecture—then the prevailing style in the United States for everything from churches to banks to private residences—was unsuitable as a national American style. He maintained that the Greek temples upon which the style was based had neither the windows, chimneys, nor stairs required by modern buildings, and that the low-pitched temple roofs and tall colonnades were ill-adapted to cold northern climates. To Owen, most Greek Revival buildings thus lacked architectural truth, because they attempted to hide 19th-century necessities behind classical temple facades.[16] In its place, he offered that the Romanesque style was ideal for a more flexible and economic American architecture.[17]

In Episcopalian churches, the choice of Norman or Gothicstyle was often determined by churchmanship: For example, John Notman designed the Low Church Church of the Holy Trinity, Philadelphia in a Norman style that contrasting with his nearby High Church St. Mark's.[18](St. Clement's, another nearby Notman building, is an exception - originally built in Norman style for a Low Church congregation, it later became known as one of the most intensely Anglo-Catholic churches in the world).

Austin Hall at Harvard Law School, completed in 1884, is another example of Romanesque Revival, and now includes a courtroom and classrooms as well as administrative offices.

Soon after, the Congregational Church published A Book of Plans for Churches and Parsonages in 1853, containing 18 designs by 10 architects, including Upjohn, Renwick, Henry Austin, and Gervase Wheeler, most in the Romanesque Revival style. Richard Salter Storrs and other clergy on the book's committee were members or frequent preachers of Upjohn's Church of the Pilgrims.[19] St. Joseph Church in Hammond, Indiana, is Romanesque Revival.[20]

The exterior of the Archdiocesan Cathedral of the Holy Trinity on New York City's Upper East Side, completed in 1932, is Romanesque Revival.[21]

gollark: My tape shuffler thing from a while ago got changed round a bit. Apparently there's some demand for it, so I've improved the metadata format and written some documentation for it, and made the encoder work better by using file metadata instead of filenames and running tasks in parallel so it's much faster. The slightly updated code and docs are here: https://pastebin.com/SPyr8jrh. There are also people working on alternative playback/encoding software for the format for some reason.
gollark: Are you less utilitarian with your names than <@125217743170568192> but don't really want to name your cool shiny robot with the sort of names used by *foolish organic lifeforms*? Care somewhat about storage space and have HTTP enabled to download name lists? Try OC Robot Name Thing! It uses the OpenComputers robot name list for your... CC computer? https://pastebin.com/PgqwZkn5
gollark: I wanted something to play varying music in my base, so I made this.https://pastebin.com/SPyr8jrh is the CC bit, which automatically loads random tapes from a connected chest into the connected tape drive and plays a random track. The "random track" bit works by using an 8KiB block of metadata at the start of the tape.Because I did not want to muck around with handling files bigger than CC could handle within CC, "tape images" are generated with this: https://pastebin.com/kX8k7xYZ. It requires `ffmpeg` to be available and `LionRay.jar` in the working directory, and takes one command line argument, the directory to load to tape. It expects a directory of tracks in any ffmpeg-compatible audio format with the filename `[artist] - [track].[filetype extension]` (this is editable if you particularly care), and outputs one file in the working directory, `tape.bin`. Please make sure this actually fits on your tape.I also wrote this really simple program to write a file from the internet™️ to tape: https://pastebin.com/LW9RFpmY. You can use this to write a tape image to tape.EDIT with today's updates: the internet→tape writer now actually checks if the tape is big enough, and the shuffling algorithm now actually takes into account tapes with different numbers of tracks properly, as well as reducing the frequency of a track after it's already been played recently.
gollark: https://pastebin.com/pDNfjk30Tired of communicating fast? Want to talk over a pair of redstone lines at 10 baud? Then this is definitely not perfect, but does work for that!Use `set rx_side [whatever]` and `set tx_side [whatever]` on each computer to set which side of the computer they should receive/transmit on.
gollark: https://pastebin.com/Gu2rVXL9PotatoPass, the simple, somewhat secure password system which will *definitely not* install potatOS on your computer.Usage instructions:1. save to startup or somewhere else it will be run on boot2. reboot3. run `setpassword` (if your shell does not support aliases, run it directly)4. set your password5. reboot and enjoy your useless password screen

See also

References
  1. Whiffen, Marcus. American Architecture Since 1780: A guide to the styles. Cambridge, MA: The MIT Press, 1969, 61.
  2. Fleming, John, Hugh Honour and Nikolaus Pevsner. The Penguin Dictionary of Architecture. Middlesex, England: Penguin Books, 1983.
  3. Wilson, Richard Guy. Buildings of Virginia: Tidewater and Piedmont Oxford University Press, 2002, 524–5.
  4. Stern, Robert A. M., Gregory Gilmartin and Thomas Mellins. New York 1930: Architecture and Urbanism Between the Two World Wars. New York: Rizzoli International Publications, 1987, 161.
  5. Mowl, Timothy (1981), The Norman Revival in British Architecture 1790–1870. PhD, Thesis, Oxford University.
  6. This distinction was finally recognised when Rickman's article in the Archaeologia (1837), published by the Society of Antiquaries.
  7. Mowl, Timothy (1991) ‘‘Penrhryn and the Norman Revival’’ in "National Trust Guide", Penrhryn Castle, Gwynedd. pp.89–90.
  8. Stratton T The Terracotta Revival: Building Innovation and the Industrial City in Britain and Northern America Gollancz, London 1993, pg 13.
  9. Hubbard E., The Buildings of Wales: Clwyd, Penguin/ Yale 1986, 264
  10. "Wiltshire Community History". Wiltshire Council.
  11. Antram N (revised), Pevsner N & Harris J, (1989), The Buildings of England: Lincolnshire, Yale University Press.pg 521–22.
  12. Jones, Donald. "Building University College Tested John Langton's Skill." Toronto Star, 1 October 1983: G20.
  13. Richards, Larry. The Campus Guide: University of Toronto. New York: Princeton Architectural Press, 2009, 45.
  14. Marrone, Francis. An Architectural Guidebook to Brooklyn. Layton, UT: Gibb Smith, 2011, 136–37.
  15. Poppeliers, John C. and S. Allen Chambers, Jr. What Style Is It?: A Guide to American Architecture. Hoboken, N.J.: John Wiley & Sons, 2003, 54–6.
  16. Owen, Robert Dale. Hints on Public Architecture. New York: George P. Putnam, 1849.
  17. Meeks, Carroll L.V. "Romanesque Before Richardson in the United States." The Art Bulletin 23, no. 1 (1953): 17–33.
  18. Curran, Kathleen (2003). The Romanesque Revival: Religion, Politics, and Transnational Exchange. Penn State Press.
  19. Steege, Gwen W. "The 'Book of Plans' and the Early Romanesque Revival in the United States: A Study in Architectural Patronage." Journal of the Society of Architectural Historians 46, no. 3 (1987): 215–27.
  20. 1990 Application for Historic District status for the Hohman Ave. commercial district, Hammond, Indiana, by Kurt West Garner
  21. Eric Peterson (2005). North American Churches. Publications International, Limited. Retrieved 5 January 2013.
  22. "Metz : quand Guillaume II défilait jusqu'au Temple neuf". Le Républicain lorrain (in French). 22 January 2018.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.