Triphenylphosphine

Triphenylphosphine (IUPAC name: triphenylphosphane) is a common organophosphorus compound with the formula P(C6H5)3 - often abbreviated to PPh3 or Ph3P. It is widely used in the synthesis of organic and organometallic compounds. PPh3 exists as relatively air stable, colorless crystals at room temperature. It dissolves in non-polar organic solvents such as benzene and diethyl ether.

Triphenylphosphine
Names
IUPAC name
Triphenylphosphane
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.009.124
EC Number
  • 210-036-0
RTECS number
  • SZ3500000
UNII
Properties
C18H15P
Molar mass 262.292 g·mol−1
Appearance White Solid
Density 1.1 g cm−3, solid
Melting point 80 °C (176 °F; 353 K)
Boiling point 377 °C (711 °F; 650 K)
Insoluble
Solubility organic solvents
Acidity (pKa) 7.64[1] (pKa of conjugate acid in acetonitrile)
-166.8·10−6 cm3/mol
1.59; εr, etc.
Structure
Pyramidal
1.4 - 1.44 D [2]
Hazards
Safety data sheet JT Baker
Not Listed
R-phrases (outdated) R20 R22 R40 R43 R50 R53
S-phrases (outdated) S36 S37 S45 S57 S60
NFPA 704 (fire diamond)
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilHealth code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformReactivity code 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
1
2
2
Flash point 180 °C (356 °F; 453 K)
Related compounds
Related tertiary phosphines
 Trimethylphosphine
Phosphine
Related compounds
 Triphenylamine
Triphenylarsine
Triphenylphosphine oxide
Triphenylphosphine sulfide
Triphenylphosphine dichloride
Triphenylphosphine selenide, Pd(PPh3)4
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

Preparation and structure

Triphenylphosphine can be prepared in the laboratory by treatment of phosphorus trichloride with phenylmagnesium bromide or phenyllithium. The industrial synthesis involves the reaction between phosphorus trichloride, chlorobenzene, and sodium.:[3]

PCl3 + 3 PhCl + 6 Na → PPh3 + 6 NaCl

Triphenylphosphine crystallizes in triclinic[4] and monoclinic modification[5] In both cases, the molecule adopts a pyramidal structure with propeller-like arrangement of the three phenyl groups.

Principal reactions with chalcogens, halogens, and acids

Triphenylphosphine undergoes slow oxidation by air to give triphenylphosphine oxide, Ph3PO:

2 PPh3 + O2 → 2 OPPh3

This impurity can be removed by recrystallisation of PPh3 from either hot ethanol or hot isopropanol.[6] This method capitalizes on the fact that OPPh3 is more polar and hence more soluble in polar solvents than PPh3.

Triphenylphosphine abstracts sulfur from polysulfide compounds, episulfides, and elemental sulfur. Simple organosulfur compounds such as thiols and thioethers are unreactive, however. The phosphorus-containing product is triphenylphosphine sulfide, Ph3PS. This reaction can be employed to assay the "labile" S0 content of a sample, say vulcanized rubber. Triphenylphosphine selenide, Ph3PSe, may be easily prepared via treatment of PPh3 with red (alpha-monoclinic) Se. Salts of selenocyanate, SeCN−, are used as the Se0 source. PPh3 can also form an adduct with Te, although this adduct primarily exists as (Ph3P)2Te rather than PPh3Te.[7]

Aryl azides react with PPh3 to give phosphanimines, analogues of OPPh3, via the Staudinger reaction. Illustrative is the preparation of triphenylphosphine phenylimide:

PPh3 + PhN3 → PhNPPh3 + N2

The phosphanimine can be hydrolyzed to the amine. Typically the intermediate phosphanimine is not isolated.

PPh3 + RN3 + H2O → OPPh3 + N2 + RNH2

Cl2 adds to PPh3 to give triphenylphosphine dichloride ([PPh3Cl]Cl), which exists as the moisture-sensitive phosphonium halide, This reagent is used to convert alcohols to alkyl chlorides in organic synthesis.

PPh3 is a weak base, but does form stable salts with strong acids such as HBr. The product contains the phosphonium cation [HPPh3]+.

PPh3 is pyramidal with a chiral propeller-like arrangement of the three phenyl rings. The rigidity of PPh3 contributes to the ease with which its derivatives crystallize.

Organic reactions

PPh3 is widely used in organic synthesis. The properties that guide its usage are its nucleophilicity and its reducing character.[8] The nucleophilicity of PPh3 is indicated by its reactivity toward electrophilic alkenes, such as Michael-acceptors, and alkyl halides. It is also used in the synthesis of biaryl compounds, such as the Suzuki reaction.

Quaternization

PPh3 combines with alkyl halides to give phosphonium salts. The facility of the quaternization reaction follows the usual pattern whereby alkyl iodides and benzylic and allylic halides are particularly efficient reactants:

PPh3 + CH3I → [CH3PPh3]+I−

These salts, which are readily isolated as crystalline solids, react with strong bases to form ylides:

Such ylides are key reagents in the Wittig reactions, used to convert aldehydes and ketones into alkenes. Nickel salts are required to react PPh3 with PhBr to give [PPh4]Br. The tetraphenylphosphonium cation is widely used to prepare crystallizable lipophilic salts.

Mitsunobu reaction

In this reaction, a mixture of PPh3 and diisopropyl azodicarboxylate ("DIAD", or its diethyl analogue, DEAD) converts an alcohol and a carboxylic acid to an ester. The DIAD is reduced as it serves as the hydrogen acceptor, and the PPh3 is oxidized to OPPh3.

Appel reaction

In this reaction, PPh3 and CX4 (X = Cl, Br) are used to convert alcohols to alkyl halides, forming OPPh3 as a byproduct.

PPh3 + CBr4 + RCH2OH → OPPh3 + RCH2Br + HCBr3

This reaction commences with nucleophilic attack of PPh3 on CBr4, an extension of the quaternization reaction listed above.

Deoxygenation

The easy oxygenation of PPh3 is exploited in its use to deoxygenate organic peroxides, which generally occurs with retention of configuration:

PPh3 + RO2H → OPPh3 + ROH (R = alkyl)

It is also used for the decomposition of organic ozonides to ketones and aldehydes, although dimethyl sulfide is more popular for the reaction as the side product, dimethyl sulfoxide is more readily separated from the reaction mixture than triphenylphosphine oxide. Aromatic N-oxides are reduced to the corresponding amine in high yield at room temperature with irradiation:[9]

Sulfonation

Sulfonation of PPh3 gives tris(3-sulfophenyl)phosphine, P(C6H4-3-SO3−)3 (TPPTS), usually isolated as the trisodium salt. In contrast to PPh3, TPPTS is water-soluble, as are its metal derivatives. Rhodium complexes of TPPTS are used in certain industrial hydroformylation reactions.[10]

3,3′,3″-Phosphanetriyltris(benzenesulfonic acid) trisodium salt is a water-soluble derivative of triphenylphosphine.

Reduction to diphenylphosphide

Lithium in THF as well as Na or K react with PPh3 to give Ph2PM (M = Li, Na, K). These salts are versatile precursors to tertiary phosphines.[11][12] For example, 1,2-dibromoethane and Ph2PM react to give Ph2PCH2CH2PPh2. Weak acids such ammonium chloride, convert Ph2PM (M = Li, Na, K) into diphenylphosphine:[12]

(C6H5)2PM + H2O → (C6H5)2PH + MOH

Transition metal complexes

Triphenylphosphine binds well to most transition metals, especially those in the middle and late transition metals of groups 7–10.[13] In terms of steric bulk, PPh3 has a Tolman cone angle of 145°,[14] which is intermediate between those of P(C6H11)3 (170°) and P(CH3)3 (115°). In an early application in homogeneous catalysis, NiBr2(PPh3)2 was used by Walter Reppe for the synthesis of acrylate esters from alkynes, carbon monoxide, and alcohols.[15] Wilkinson further popularized the use of PPh3, in part through the then revolutionary hydroformylation catalyst RhH(PPh3)2(CO)2.

In contrast to triphenylphosphine triphenylamine shows little tendency to bind to metals. The difference between the coordinating power of PPh3 and NPh3 reflects the greater steric crowding around the nitrogen atom, which is smaller and favors a more tetrahedral geometry. More similar to PPh3 in terms of its coordinating properties is triphenylarsine, AsPh3.

An important technique for the characterization of metal-PPh3 compounds is 31P NMR spectroscopy. Substantial shifts occur upon complexation and31P-31P spin-spin coupling can provide insight into the structure of complexes containing multiple phosphine ligands.

Illustrative PPh3 complexes:

Polymer-anchored PPh3 derivatives

Polymeric analogues of PPh3 are known whereby polystyrene is modified with PPh2 groups at the para position. Such polymers can be employed in many of the applications used for PPh3 with the advantage that the polymer, being insoluble, can be separated from products by simple filtration of reaction slurries. Such polymers are prepared via treatment of 4-lithiophenyl-substituted polystyrene with chlorodiphenylphosphine (PPh2Cl).

gollark: Generally, yes.
gollark: It *kind of* is.
gollark: <@!330678593904443393> Installers, live CDs, config files.
gollark: rolling release good¡
gollark: A distro is good if it is not bad.

See also

References
  1. Haav, Kristjan; Saame, Jaan; Kütt, Agnes; Leito, Ivo (2012). "Basicity of Phosphanes and Diphosphanes in Acetonitrile". European Journal of Organic Chemistry. 2012 (11): 2167–2172. doi:10.1002/ejoc.201200009. ISSN 1434-193X.
  2. Warchol, M.; Dicarlo, E. N.; Maryanoff, C. A.; Mislow, K. (1975). "Evidence for the Contribution of the Lone Pair to the Molecular Dipole Moment of Triarylphosphines". Tetrahedron Letters. 16 (11): 917–920. doi:10.1016/S0040-4039(00)72019-3.
  3. Corbridge, D. E. C. Phosphorus: An Outline of its Chemistry, Biochemistry, and Technology (5th ed.). Amsterdam: Elsevier. ISBN 0-444-89307-5.
  4. Kooijman, H.; Spek, A. L.; van Bommel, K. J. C.; Verboom, W.; Reinhoudt, D. N. (1998). "A Triclinic Modification of Triphenylphosphine" (PDF). Acta Crystallographica. C54: 1695–1698. doi:10.1107/S0108270198009305.
  5. Dunne, B. J.; Orpen, A. G. (1991). "Triphenylphosphine: a Redetermination" (PDF). Acta Crystallographica. C47: 345–347. doi:10.1107/S010827019000508X.
  6. Armarego, W. L. F.; Perrin, D. D.; Perrin, D. R. (1980). Purification of Laboratory Chemicals (2nd ed.). New York: Pergamon. p. 455. ISBN 9780080229614.
  7. Jones, C. H. W.; Sharma, R. D. (1987). "125Te NMR and Mössbauer Spectroscopy of Tellurium-Phosphine Complexes and the Tellurocyanates". Organometallics. 6 (7): 1419–1423. doi:10.1021/om00150a009.
  8. Cobb, J. E.; Cribbs, C. M.; Henke, B. R.; Uehling, D. E.; Hernan, A. G.; Martin, C.; Rayner, C. M. (2004). "Triphenylphosphine". In L. Paquette (ed.). Encyclopedia of Reagents for Organic Synthesis. New York: J. Wiley & Sons. doi:10.1002/047084289X.rt366.pub2.
  9. Burke, S. D.; Danheiser, R. L. (1999). "Triphenylphosphine". Handbook of Reagents for Organic Synthesis, Oxidizing and Reducing Agents. Wiley. p. 495. ISBN 978-0-471-97926-5.
  10. Herrmann, W. A.; Kohlpaintner, C. W. (1998). "Syntheses of Water-Soluble Phosphines and Their Transition Metal Complexes". Inorg. Synth. 32: 8–25. doi:10.1002/9780470132630.ch2. ISBN 978-0-470-13263-0.
  11. George W. Luther III, Gordon Beyerle (1977). "Lithium Diphenylphosphide and Diphenyl(Trimethylsilyl)Phosphine". Inorganic Syntheses. 17: 186–188. doi:10.1002/9780470132487.ch51.CS1 maint: uses authors parameter (link)
  12. V. D. Bianco S. Doronzo (1976). "Diphenylphosphine". Inorganic Syntheses. 16: 161–188. doi:10.1002/9780470132470.ch43.CS1 maint: uses authors parameter (link)
  13. Elschenbroich, C.; Salzer, A. (1992). Organometallics : A Concise Introduction (2nd ed.). Weinheim: Wiley-VCH. ISBN 3-527-28165-7.
  14. Immirzi, A.; Musco, A. (1977). "A method to measure the size of phosphorus ligands in coordination complexes". Inorganica Chimica Acta. 25: L41–L42. doi:10.1016/S0020-1693(00)95635-4.
    • Reppe, W.; Schweckendiek, W. J. (1948). "Cyclisierende Polymerisation von Acetylen. III Benzol, Benzolderivate und hydroaromatische Verbindungen". Justus Liebigs Annalen der Chemie. 560 (1): 104–116. doi:10.1002/jlac.19485600104.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.