Phenyllithium

Phenyllithium or lithobenzene is an organometallic agent with the empirical formula C6H5Li. It is most commonly used as a metalating agent in organic syntheses and a substitute for Grignard reagents for introducing phenyl groups in organic syntheses.[2] Crystalline phenyllithium is colorless; however, solutions of phenyllithium are various shades of brown or red depending on the solvent used and the impurities present in the solute.[3]

Phenyllithium
Names
Systematic IUPAC name
Phenyllithium[1]
Other names
Phenyl lithium
Identifiers
3D model (JSmol)
Abbreviations LiPh, PhLi
506502
ChEBI
ChemSpider
ECHA InfoCard 100.008.838
EC Number
  • 209-720-1
2849
MeSH phenyllithium
Properties
LiC
6H
5
Molar mass 84.045 g mol−1
Appearance Colorless crystals
Density 828 mg cm−3
Boiling point 140 to 143 °C (284 to 289 °F; 413 to 416 K)
Reacts
Thermochemistry
Std enthalpy of
formation (ΔfH⦵298)
 48.3-52.5 kJ mol−1
Hazards
Safety data sheet External MSDS
R-phrases (outdated) R14, R17, R23/24/25, R48
S-phrases (outdated) (S1/2), S8, S9, S16, S26, S30, S46, S36/37/39, S45
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Structure and properties

Phenyllithium is an organolithium compound that forms monoclinic crystals. Solid phenyllithium can be described as consisting of dimeric Li2Ph2 subunits. The Li atoms and the ipso carbons of the phenyl rings form a planar four-membered ring. The plane of the phenyl groups are perpendicular to the plane of this Li2C2 ring. Additional strong intermolecular bonding occurs between these phenyllithium dimers and the π-electrons of the phenyl groups in the adjacent dimers, resulting in an infinite polymeric ladder structure.[4]

In solution, it takes a variety of structures dependent on the organic solvent. In tetrahydrofuran, it equilibrates between monomer and dimer states. In ether, as it is commonly sold, phenyllithium exists as a tetramer. Four Li atoms and four ipso carbon centers occupy alternating vertices of a distorted cube. Phenyl groups are at the faces of the tetrahedron and bind to three of the nearest Li atoms.

The C–Li bond lengths are an average of 2.33 Å. An ether molecule binds to each of the Li sites through its oxygen atom. In the presence of LiBr, a byproduct of directly reacting lithium with a phenyl halide, the [(PhLi•Et2O)4] complex instead becomes [(PhLi•Et2O)3•LiBr). The Li atom of LiBr occupies one of the lithium sites in the cubane-type cluster and Br atom sits in an adjacent carbon site.[5]

Preparation

Phenyllithium was first produced by the reaction of lithium metal with diphenylmercury:[6]

(C6Η5)2Ηg + 2Li → 2C6Η5Li + Ηg

Reaction of a phenyl halide with lithium metal produces phenyllithium:

X-Ph + 2Li → Ph-Li + LiX

Phenyllithium can also be synthesized with a metal-halogen exchange reaction:

n-BuLi + X-Ph → n-BuX + Ph-Li

The predominant method of producing phenyllithium today are the latter two syntheses.

Reactions

The primary use of PhLi is to facilitate formation of carbon-carbon bonds by nucleophilic addition and substitution reactions:

PhLi + R2C=O → PhR2COLi

2-Phenylpyridine is prepared by the reaction of phenyl lithium with pyridine, a process that entails an addition-elimination pathway:[7]

C6H5Li + C5H5N → C6H5-C5H4N + LiH
gollark: That can't be right.
gollark: Wait, Windows can't store files bigger than ~2GB?
gollark: Fixed.
gollark: ++delete ATS2
gollark: Quite a lot of the time I don't care a massive amount about performance, as long as my thing isn't horrendously slow, because it's serving not very much traffic on a server with quite a lot of free resources.

References
  1. "phenyllithium (CHEBI:51470)". Chemical Entities of Biological Interest (ChEBI). Cambridge, UK: European Bioinformatics Institute. 2009-01-22. Main. Retrieved 2013-06-01.
  2. Wietelmann, U.; Bauer, R. J. "Lithium and Lithium Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a15_393.CS1 maint: multiple names: authors list (link)
  3. Gilman, H.; Zoellner, E. A.; Selby, W. M. (1932). "An Improved Procedure for the Preparation of Organolithium Compounds". Journal of the American Chemical Society. 54 (5): 1957–1962. doi:10.1021/ja01344a033.
  4. Dinnebier, R. E.; Behrens, U.; Olbrich, F. (1998). "Lewis Base-Free Phenyllithium: Determination of the Solid-State Structure by Synchrotron Powder Diffraction". Journal of the American Chemical Society. 120 (7): 1430–1433. doi:10.1021/ja972816e.
  5. Hope, H.; Power, P. P. (1983). "Isolation and Crystal Structures of the Halide-Free and Halide-Rich Phenyllithium Etherate Complexes [(PhLi•Et2O)4] and [(PhLi•Et2O)3•LiBr]". Journal of the American Chemical Society. 105 (16): 5320–5324. doi:10.1021/ja00354a022.
  6. Green, D. P.; Zuev, D. (2008). "Phenyllithium". Encyclopedia of Reagents for Organic Synthesis, 8 Volume Set. Encyclopedia of Reagents for Organic Synthesis. Wiley and Sons. doi:10.1002/047084289X.rp076.pub2. ISBN 978-0471936237.
  7. Evans, J. C. W.; Allen, C. F. H. "2-Phenylpyridine" Organic Syntheses (1938), vol. 18, p. 70. doi:10.15227/orgsyn.018.0070
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.