PCX

PCX, standing for PiCture eXchange, is an image file format developed by the now-defunct ZSoft Corporation of Marietta, Georgia, United States. It was the native file format for PC Paintbrush and became one of the first widely accepted DOS imaging standards, although it has since been succeeded by more sophisticated image formats, such as BMP, JPEG, and PNG. PCX files commonly stored palette-indexed images ranging from 2 or 4 colors to 16 and 256 colors, although the format has been extended to record true-color (24-bit) images as well.[2]

This article is about the image file format. For the stock exchange, see Pacific Exchange. For the motorcycle, see Honda PCX.

PCX

Filename extension	.pcx
Internet media type	image/vnd.zbrush.pcx, image/x-pcx (deprecated)[1]
Developed by	ZSoft Corporation
Initial release	1985 (1985)
Latest release	5 (1991 (1991))
Type of format	Lossless bitmap image format

PCX image formats

Table A. Common PCX Image Formats

Bit Depth	Planes	Number of Colors
4	1	16 colors from a palette
8	1	256 colors from a palette
8	1	256 shades of gray
4	4	4096 colors with 16 levels of transparency
8	3	16.7 million, 24-bit "true color"
8	4	16.7 million with 256 levels of transparency
1	1	2 colors monochrome (1-Bit) (Win 3.1 Paintbrush)
1	4	16 colors RGBi (4-Bit) in 4 planes (Win 3.1 Paintbrush)

PCX was designed during the early development of PC display hardware and most of the formats it supported are no longer used, Table A shows a list of the most commonly used PCX formats. Contemporary image editing programs may not read PCX files that match older hardware.

PCX is supported by common image processing software including ACDSee, GIMP, ImageMagick, IrfanView, LView, Netpbm, PaintShop Pro, Photoshop, Visio, PMview, XnView and GraphicConverter.[3][4] In version 2.1.4 FFmpeg could encode and decode the PCX pixel formats rgb24, rgb8, bgr8, rgb4_byte, bgr4_byte, gray, pal8, and monob.[5]

There is a multi-page version of PCX, used by some computer fax and document management programs, with file extension .dcx. A DCX file consists of a header introducing a set of following PCX files.[6]

PCX file format

PCX files were designed for use on IBM-compatible PCs and always use little endian byte ordering. A PCX file has three main sections, in the following order

1. 128-byte header
2. image data
3. (optional) 256-color palette

The PCX file header contains an identifier byte (value 10), a version number, image dimensions, 16 palette colors, number color planes, bit depth of each plane, and a value for compression method. PCX version numbers range from 0 to 5, this originally denoted the version of the PC Paintbrush program used to create the PCX file. The header always has space for 16 colors though the number of colors used depends upon the bit depth of the image. The header is 74 bytes long and the image data begins 128 bytes after the start of the file, the 54 bytes between are not used.[7] The header is composed of 18 fields:[2]

Offset hex	Offset dec	Size	Purpose
00	0	1 byte	The fixed header field valued at a hexadecimal 0x0A (= 10 in decimal).
01	1	1 byte	The version number referring to the Paintbrush software release, which might be: 0 PC Paintbrush version 2.5 using a fixed EGA palette 2 PC Paintbrush version 2.8 using a modifiable EGA palette 3 PC Paintbrush version 2.8 using no palette 4 PC Paintbrush for Windows 5 PC Paintbrush version 3.0, including 24-bit images
02	2	1 byte	The method used for encoding the image data. Can be: 0 No encoding (rarely used) 1 Run-length encoding (RLE)
03	3	1 byte	The number of bits constituting one pixel in a plane. Possible values are: 1 The image has two colors (monochrome) 2 The image has four colors 4 The image has 16 colors 8 The image has 256 colors
04	4	2 bytes	The minimum x co-ordinate of the image position.
06	6	2 bytes	The minimum y co-ordinate of the image position.
08	8	2 bytes	The maximum x co-ordinate of the image position.
0A	10	2 bytes	The maximum y co-ordinate of the image position.
0C	12	2 bytes	The horizontal image resolution in DPI.
0E	14	2 bytes	The vertical image resolution in DPI.
10	16	48 bytes	The EGA palette for 16-color images.
40	64	1 byte	The first reserved field, usually set to zero.
41	65	1 byte	The number of color planes constituting the pixel data. Mostly chosen to be 1, 3, or 4.
42	66	2 bytes	The number of bytes of one color plane representing a single scan line.
44	68	2 bytes	The mode in which to construe the palette: 1 The palette contains monochrome or color information 2 The palette contains grayscale information
46	70	2 bytes	The horizontal resolution of the source system's screen.
48	72	2 bytes	The vertical resolution of the source system's screen.
4A	74	54 bytes	The second reserved field, intended for future extensions, and usually set to zero bytes.

All PCX files use the same compression scheme and the compression value is always 1. No other values have been defined and there are no uncompressed PCX files. One source claims that 0 (uncompressed) is allowed, but not much software supports it.[8]

Image data layout

Table B. PCX Image Data Arranged into Color Planes

Row 0	R R R R R R R R R
	G G G G G G G G
	B B B B B B B B B
	A A A A A A A A A
Row 1	R R R R R R R R R
	G G G G G G G G
	B B B B B B B B B
	A A A A A A A A A
Row 2 etc.	....

PCX image data is stored in rows or scan lines in top-down order. If the image has multiple planes, these are stored by plane within row, such that all the red data for row 0 are followed by all the green data for row 0, then all the blue data, then alpha data. This pattern is repeated for each line as shown in Table B.

When an image is less than 8 bits per pixel, each line is padded to the next byte boundary. For example, if an image has 1 plane of 1-bit data (monochrome) with a width of 22 pixels, each row will be 3 bytes long, having 24 bits per row with 2 bits unused.

Image data compression

PCX image data are compressed using run-length encoding (RLE), a simple lossless compression algorithm that collapses a series of three or more consecutive bytes with identical values into a two-byte pair. The two most-significant bits of a byte are used to determine whether the given data represent a single pixel of a given palette index or color value, or an RLE pair representing a series of several pixels of a single value:

1. if both bits are 1, the byte is interpreted as the run length. This leaves 6 bits for the actual run length value, i.e. a value range of 0-63
2. in any other case, the byte is interpreted as a single pixel value. This leaves all value for which bit #7 and bit #8 are not 1 at the same time. This requirement is not met by all values of 192 (binary 11000000) and above.

Compared to the maximum run length of 128, possible with TGA RLE compression, the PCX run-length encoding offers a larger single-pixel value range, while the maximum run length is restricted to 63.

Due to the use of the two most-significant bits as flags, pixel values from 192 to 255 (with their most-significant bit already set) must be stored in an RLE byte pair, even when they only occur one or two pixels in succession, whereas color indexes 0 to 191 can be stored directly or in RLE byte pairs (whichever is more space-efficient); therefore, the actual compression ratio could be optimized with proper sorting of palette entries, though this is not feasible where the file must share its color palette with other images. For example, a palette could be optimized with the most commonly used colors occurring in palette positions 0 to 191 and the least common colors allocated to the remaining quarter of the palette.

Another inefficiency with the RLE algorithm is that it is possible to store chunks with a length of 0, which allows whitespace in the file. This allowed PCX files to be decompressed slightly faster on the processors it was originally intended for. This quirk could be used for steganography.

The PCX compression algorithm requires very little processor power or memory to apply, a significant concern with the computer systems when it was designed. As computers and display hardware grow more sophisticated, the PCX algorithm becomes less space-efficient. Compression algorithms used by newer image formats are more efficient when compressing images such as photographs, and dithered or otherwise complex graphics.

Color palette

A PCX file has space in its header for a 16 color palette. When 256-color VGA hardware became available there was not enough space for the palette in a PCX file; even the 54 unused bytes after the header would not be enough. The solution chosen was to put the palette at the end of the file, along with a marker byte to confirm its existence.

If a PCX file has a 256-color palette, it is found 768 bytes from the end of the file. In this case the value in the byte preceding the palette should be 12 (0x0C). The palette is stored as a sequence of RGB triples; its usable length is defined by the number of colors in the image. Colors values in a PCX palette always use 8 bits, regardless of the bit depth of the image.

References

1. .pcx MIME type not registered at IANA
2. James D. Murray, William vanRyper (April 1996). "Encyclopedia of Graphics File Formats, Second Edition". O'Reilly. ISBN 1-56592-161-5. Retrieved 2014-03-07.CS1 maint: uses authors parameter (link)
3. Nir Sofer. ".pcx Extension". Retrieved 2014-01-12.
4. "File Type: Microsoft PaintBrush Bitmap Graphic". Windows File Association. Microsoft. 2013. Retrieved 2014-01-12.
5. "Image Formats". FFmpeg General Documentation. 2014. Retrieved 2014-02-23.
6. ".DCX File Extension". fileinfo.com. 2010-02-19. Retrieved 2014-03-14.
7. Dean Ansley (1991). "ZSoft PCX File Format Technical Reference Manual". ZSoft Corporation. Retrieved 2014-03-14.
8. "PCX Format". ModdingWiki. 2012-06-23. Retrieved 2014-03-14.