Breccia

Breccia ( /ˈbrɛtʃiə/ or /ˈbrɛʃiə/) is a rock composed of broken fragments of minerals or rock cemented together by a fine-grained matrix[1] that can be similar to or different from the composition of the fragments.

Basalt breccia in the Canary Islands; green groundmass is composed of epidote

Megabreccia (left) at Titus Canyon Narrows, Death Valley National Park, California

Tertiary breccia at Resting Springs Pass, Mojave Desert, California

Unusual breccia cemented by azurite and malachite, Morenci Mine, Arizona

The word has its origins in the Italian language, in which it means either "loose gravel" or "stone made by cemented gravel". A breccia may have a variety of different origins, as indicated by the named types including sedimentary breccia, tectonic breccia, igneous breccia, impact breccia, and hydrothermal breccia.

A megabreccia is a breccia composed of very large rock fragments, sometimes kilometers across, which can be formed by landslides,[2] impact events,[3] or caldera collapse.[4]

Types

Sedimentary

Sedimentary breccia is a type of clastic sedimentary rock which is made of angular to subangular, randomly oriented clasts of other sedimentary rocks. A conglomerate, by contrast, is a sedimentary rock composed of rounded fragments or clasts of pre-existing rocks. Both breccia and conglomerate are composed of fragments averaging greater than 2 millimetres (0.079 in) in size. The angular shape of the fragments indicates that the material has not been transported far from its source.

Sedimentary breccia consists of angular, poorly sorted, immature fragments of rocks in a finer grained groundmass which are produced by mass wasting. It is lithified colluvium or scree. Thick sequences of sedimentary (colluvial) breccia are generally formed next to fault scarps in grabens. Breccia may occur along a buried stream channel where it indicates accumulation along a juvenile or rapidly flowing stream. Sedimentary breccia may be formed by submarine debris flows. Turbidites occur as fine-grained peripheral deposits to sedimentary breccia flows. In a karst terrain, a collapse breccia may form due to collapse of rock into a sinkhole or in cave development.

Fault

Fault breccia results from the grinding action of two fault blocks as they slide past each other. Subsequent cementation of these broken fragments may occur by means of the introduction of mineral matter in groundwater.

Igneous

Igneous clastic rocks can be divided into two classes:

Broken, fragmental rocks associated with volcanic eruptions, both of the lava and pyroclastic type;
Broken, fragmental rocks produced by intrusive processes, usually associated with plutons or porphyry stocks.

Volcanic

Volcanic pyroclastic rocks are formed by explosive eruption of lava and any rocks which are entrained within the eruptive column. This may include rocks plucked off the wall of the magma conduit, or physically picked up by the ensuing pyroclastic surge. Lavas, especially rhyolite and dacite flows, tend to form clastic volcanic rocks by a process known as autobrecciation. This occurs when the thick, nearly solid lava breaks up into blocks and these blocks are then reincorporated into the lava flow again and mixed in with the remaining liquid magma. The resulting breccia is uniform in rock type and chemical composition.

Lavas may also pick up rock fragments, especially if flowing over unconsolidated rubble on the flanks of a volcano, and these form volcanic breccias, also called pillow breccias. Within the volcanic conduits of explosive volcanoes the volcanic breccia environment merges into the intrusive breccia environment. There the upwelling lava tends to solidify during quiescent intervals only to be shattered by ensuing eruptions.

Intrusive

Clastic rocks are also commonly found in shallow subvolcanic intrusions such as porphyry stocks, granites and kimberlite pipes, where they are transitional with volcanic breccias.[5] Intrusive rocks can become brecciated in appearance by multiple stages of intrusion, especially if fresh magma is intruded into partly consolidated or solidified magma. This may be seen in many granite intrusions where later aplite veins form a late-stage stockwork through earlier phases of the granite mass. When particularly intense, the rock may appear as a chaotic breccia.

Clastic rocks in mafic and ultramafic intrusions have been found and form via several processes:

consumption and melt-mingling with wall rocks, where the felsic wall rocks are softened and gradually invaded by the hotter ultramafic intrusion (termed taxitic texture by Russian geologists);
accumulation of rocks which fall through the magma chamber from the roof, forming chaotic remnants;
autobrecciation of partly consolidated cumulate by fresh magma injections or by violent disturbances within the magma chamber (e.g., postulated earthquakes);
accumulation of xenoliths within a feeder conduit or vent conduit.

Impact

Alamo bolide impact breccia (Late Devonian, Frasnian) near Hancock Summit, Pahranagat Range, Nevada

Impact breccias are thought to be diagnostic of an impact event such as an asteroid or comet striking the Earth and are normally found at impact craters. Impact breccia, a type of impactite, forms during the process of impact cratering when large meteorites or comets impact with the Earth or other rocky planets or asteroids. Breccia of this type may be present on or beneath the floor of the crater, in the rim, or in the ejecta expelled beyond the crater.

Impact breccia may be identified by its occurrence in or around a known impact crater, and/or an association with other products of impact cratering such as shatter cones, impact glass, shocked minerals, and chemical and isotopic evidence of contamination with extraterrestrial material (e.g., iridium and osmium anomalies). An example of an impact breccia is the Neugrund breccia, which was formed in the Neugrund impact.

Hydrothermal

Hydrothermal breccia in the Cloghleagh Iron Mine, near Blessington in Ireland, composed mainly of quartz and manganese oxides, the result of seismic activity about 12 million years ago

Hydrothermal breccias usually form at shallow crustal levels (<1 km) between 150 and 350 °C, when seismic or volcanic activity causes a void to open along a fault deep underground. The void draws in hot water, and as pressure in the cavity drops, the water violently boils. In addition, the sudden opening of a cavity causes rock at the sides of the fault to destabilise and implode inwards, and the broken rock gets caught up in a churning mixture of rock, steam and boiling water. Rock fragments collide with each other and the sides of the void, and the angular fragments become more rounded. Volatile gases are lost to the steam phase as boiling continues, in particular carbon dioxide. As a result, the chemistry of the fluids changes and ore minerals rapidly precipitate. Breccia-hosted ore deposits are quite common.[6]

Silicified and mineralized breccia. Light gray is mostly dolomite with a little translucent quartz. Dark gray is jasperoid and ore minerals. Veinlet along lower edge of specimen contains sphalerite in carbonates. Pend Oreille mine, Pend Oreille County, Washington

The morphology of breccias associated with ore deposits varies from tabular sheeted veins and clastic dikes associated with overpressured sedimentary strata, to large-scale intrusive diatreme breccias (breccia pipes), or even some synsedimentary diatremes formed solely by the overpressure of pore fluid within sedimentary basins. Hydrothermal breccias are usually formed by hydrofracturing of rocks by highly pressured hydrothermal fluids. They are typical of the epithermal ore environment and are intimately associated with intrusive-related ore deposits such as skarns, greisens and porphyry-related mineralisation. Epithermal deposits are mined for copper, silver and gold.

In the mesothermal regime, at much greater depths, fluids under lithostatic pressure can be released during seismic activity associated with mountain building. The pressurised fluids ascend towards shallower crustal levels that are under lower hydrostatic pressure. On their journey, high-pressure fluids crack rock by hydrofracturing, forming an angular in situ breccia. Rounding of rock fragments is less common in the mesothermal regime, as the formational event is brief. If boiling occurs, methane and hydrogen sulfide may be lost to the steam phase, and ore may precipitate. Mesothermal deposits are often mined for gold.

Ornamental uses

Breccia statue of the Ancient Egyptian goddess Tawaret

For thousands of years, the striking visual appearance of breccias has made them a popular sculptural and architectural material. Breccia was used for column bases in the Minoan palace of Knossos on Crete in about 1800 BC.[7] Breccia was used on a limited scale by the ancient Egyptians; one of the best-known examples is the statue of the goddess Tawaret in the British Museum. It was regarded by the Romans as an especially precious stone and was often used in high-profile public buildings. Many types of marble are brecciated, such as Breccia Oniciata or Breche Nouvelle.

Breccia is most often used as an ornamental or facing material in walls and columns. A particularly striking example can be seen in the Pantheon in Rome, which features two gigantic columns of pavonazzetto, a breccia from Phrygia (in modern Turkey). Pavonazzetto obtains its name from its extremely colourful appearance, which is reminiscent of a peacock's feathers (pavone is "peacock" in Italian).

gollark: Smallpox was I think similarly bad, but got eradicated ages ago by vaccination.

gollark: They mostly don't have the same combination of lethality and contagiousness.

gollark: If it had been going around with its current death rate before 2019, people would have noticed.

gollark: Imagine imagining people imagining people imagining stuff.

gollark: https://aeon.co/essays/why-pregnancy-is-a-biological-war-between-mother-and-baby

References

Glossary of Meteoritical Terms. Meteorlab.com. Retrieved on 2011-06-22.
Biek, Robert F. (May 2013). "The Early Miocene Markagunt Megabreccia: Utah's largest catastrophic landsline". Utah Geological Survey Notes. 45 (2). Retrieved 28 July 2020.
McEwen, A. S.; Tornabene, L.; Grant, J.; Wray, J.; Mustard, J. (2008). "Noachian Megabreccia on Mars". American Geophysical Union Fall Meeting. Bibcode:2008AGUFM.P43D..03M. Retrieved 28 July 2020.
Goff, Fraser; Gardner, Jamie N.; Reneau, Steven L.; Kelley, Shari A.; Kempter, Kirt A.; Lawrence, John R. (2011). "Geologic map of the Valles caldera, Jemez Mountains, New Mexico". New Mexico Bureau of Geology and Mineral Resources Map Series. 79. Retrieved 18 May 2020.
Mitcham, T. W. (1974). "Origin of breccia pipes". American Journal of Science. 69 (3): 412–413. doi:10.2113/gsecongeo.69.3.412.
Michel Jébrak (1997). "Hydrothermal breccias in vein-type ore deposits: A review of mechanisms, morphology and size distribution". Ore Geology Reviews. 12 (3): 111–134. doi:10.1016/S0169-1368(97)00009-7.
C. Michael Hogan, Knossos fieldnotes, Modern Antiquarian (2007)