Magnetic anomaly detector

A magnetic anomaly detector (MAD) is an instrument used to detect minute variations in the Earth's magnetic field. The term refers specifically to magnetometers used by military forces to detect submarines (a mass of ferromagnetic material creates a detectable disturbance in the magnetic field); military MAD equipment is a descendant of geomagnetic survey or aeromagnetic survey instruments used to search for minerals by detecting their disturbance of the normal earth-field.

MAD rear boom on P-3C
The SH-60B Seahawk helicopter carries a yellow and red towed MAD array known as a ‘MAD bird’, seen on the aft fuselage

History

Geoexploration by measuring and studying variations in the Earth's magnetic field has been conducted by scientists since 1843. The first uses of magnetometers were for the location of ore deposits. Thalen's "The Examination of Iron Ore Deposits by Magnetic Measurements", published in 1879, was the first scientific treatise describing this practical use.[1]

Magnetic anomaly detectors employed to detect submarines during World War II harnessed the fluxgate magnetometer, an inexpensive and easy to use technology developed in the 1930s by Victor Vacquier of Gulf Oil for finding ore deposits.[2][3] MAD gear was used by both Japanese and U.S. anti-submarine forces, either towed by ship or mounted in aircraft to detect shallow submerged enemy submarines. The Japanese called the technology jikitanchiki (磁気探知機, "Magnetic Detector"). After the war, the U.S. Navy continued to develop MAD gear as a parallel development with sonar detection technologies.

Satellite, near-surface and oceanic data from detectors was used to create the World Digital Magnetic Anomaly Map published by the Commission for the Geological Map of the World (CGMW) in July 2007.

Operation

To reduce interference from electrical equipment or metal in the fuselage of the aircraft, the MAD sensor is placed at the end of a boom or on a towed aerodynamic device.[4] Even so, the submarine must be very near the aircraft's position and close to the sea surface for detection of the anomaly, because magnetic fields decrease as the inverse cube of distance.[4] The size of the submarine, its hull composition and orientation determine the detection range. MAD devices are usually mounted on aircraft.[4]

Other uses

For aeromagnetic survey applications the magnetic sensor can be mounted on an aircraft (typically on a long probe in front of or behind the aircraft to reduce the magnetic effects of the aircraft itself) or in a towed device. A chart is produced that geologists and geophysicists can study to determine the distribution and concentration of magnetic minerals which are related to geology and mineral deposits.

gollark: Yes.
gollark: Does PotatOS do that? Huh.
gollark: Enjoy that in general, but don't enjoy that in this case as it does not apply.
gollark: Enjoy being wrong!
gollark: Alternatively, potatOS computers have a `potatOS` folder for user data.

See also
  • Antisubmarine warfare
  • Autolycus, a precursor of MAD

References
  1. Note Outline: Geophysical Surveying Using Magnetics Methods, January 16, 2004, University of Calgary
  2. Dunmore, Spencer, Lost Subs, Chartwell Books, Edison NJ, 2007, p.120 ISBN 978-0-7858-2226-4
  3. "Victor Vacquier Sr., 1907–2009: Geophysicist was a master of magnetics", Los Angeles Times: B24, January 24, 2009.
  4. "Fundamentals of Naval Weapons Systems - Chapter 9 Underwater Detection and Tracking Systems".
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.