Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [d-link]

45 questions
5
votes
2 answers

What is difference between `Wireless Universal Repeater` and `Wireless Distribution System(WDS)`?

I have a DWL-2100AP, which has more extra modes other than Wireless Access Point: Wireless Acess Point Wireless Client Universal Repeater WDS with AP WDS My question is: what is difference between Universal Repeater and WDS ?
pylover
  • 708
  • 3
  • 9
  • 15
3
votes
3 answers

How to forward DHCP requests through router to Win 2k8R2 server?

I have a D-Link DGL-4500 and I've been using that for a long time as my DHCP server. I now have a Windows Server 2008 R2 machine plugged into it and I have set it up as a DHCP server. I don't have 2 NICs on my server machine, so I still wanted to…
void.pointer
  • 505
  • 2
  • 8
  • 16
2
votes
1 answer

OpenVPN server configuration with D-Link DSR-250n as client

I am attempting to have my D-Link DSR-250n router connect to my OpenVPN server. I have followed this guide in terms of getting the server up and running, and can successfully establish a client connection and resolve names using both the OpenVPN…
Unpossible
  • 143
  • 1
  • 9
2
votes
1 answer

D-link DAP-2590 VLAN configuration

So we have been fighting this issue for well over a year. It's been so long that I am having to relearn the configuration today. Here's the situation. We're running several D-Link DAP-2590's with multiple SSID's. There is an employee VLAN (10) and a…
Atomiklan
  • 539
  • 7
  • 16
2
votes
2 answers

How do I route an external IP address to a internal one, from two different VLAN's? [D-link DGS-3324SR]

(Apologies in advance for not being an network savvy guy) I have four VLAN's configured on a 24 port D-link DGS-3324SR. Each VLAN has 6 ports. The first VLAN has a connection to a modem providing 16 different "external" IP adresses. I call this the…
alu
  • 21
  • 1
  • 2
2
votes
2 answers

Connect Dlink xStack DGS-3420 stack to a Brocade Stack

I'm currently having difficulty determining the best way to connect a Dlink DGS-3420-52T switch stack to a IBM B50G switch stack. I have two IBM B50G switches stacked together, which then connect to our firewall and then out to the internet. I…
David Jackson
  • 81
  • 4
2
votes
1 answer

Is it possible/likely for a faulty network card (gigabit ethernet) to crash your consumer-grade router?

After much messing around with what appeared to be 4 faulty routers in a row I realized that I can reproduce causing my DLINK DIR-655 router to freeze up and require a hard reboot (to factory setttings) by simply plugging in my Lenovo W520's…
benstpierre
  • 265
  • 1
  • 3
  • 7
2
votes
2 answers

D-Link DES-3550: can't change password

I have a D-Link DES-3550 switch, Firmware: Build 5.00-B28. I want to change admin password, but somehow I am unable to do this: DES-3550 Fast Ethernet Switch Command Line Interface Firmware: Build 5.00-B28 …
maialithar
  • 151
  • 9
2
votes
2 answers

What is the difference between Port Forwarding and NAT Forwarding?

In the D-Link router configuration, I found two notions, NAT Forwarding that pairs A Local IP Address with A Remote IP Address: And at the same time there is Port Forwarding that pairs A WAN Interface/IP and WAN Port with A LAN Port and LAN IP: …
TiyebM
  • 131
  • 1
  • 9
1
vote
1 answer

Unable to SSH into switch: Key exchange or Algorithm Negotiation failed on hold

Referred here by Network Engineering Stack Exchange. I am having a D-link 1510-28 switch to which I am trying to SSH into. Upon trying the command: srajan@srajan-Virtual-Machine:~$ ssh admin@10.82.64.5 Unable to negotiate with 10.82.64.5 port 22:…
Srajan Soni
  • 11
  • 1
  • 5
1
vote
0 answers

Configure 802.1Q VLAN on D-LINK switches

I am looking for some help on configuring 2 D-LINK switches (DGS 1510-52X on one side and DGS 1210-52 on the other) for my network needs. WAN LINKS on router are actually 2: First is WAN with NAT translation to company LAN network, having VLAN ID…
Labsy
  • 43
  • 1
  • 8
1
vote
2 answers

Could a D-Link managed switch be causing intermittent connectivity/DHCP issues for clients on a LAN

I use a Draytek 2860 router to manage an office internet connection. This feeds a WAN connection into a managed switch (D-Link DGS 1210 24), and the ports on the switch are then connected to a basic switchboard which then servers connections to…
shaneoh
  • 404
  • 3
  • 7
  • 18
1
vote
1 answer

D-link DAP-2695 VLAN configuration

Well... I thought I had this all figured out... I am essentially reopening this same question I had 2 years ago (Reference: D-link DAP-2590 VLAN configuration) I got it all figured out back then and everything has been working GREAT and is still…
Atomiklan
  • 539
  • 7
  • 16
1
vote
1 answer

DSR-250N Wifi clients can see each other?

Is there any change you can isolate wifi traffic between the wifi clients for this (DSR-250N) specific router? I have a wifi client (app) that can't open a wifi (ZEBRA printer) port, getting timeouts. When i use a wired PC (connected to the…
Roger
  • 790
  • 1
  • 6
  • 17
1
vote
2 answers

D-link DAP-1353 n2 not giving IP address

I have a D-link DAP-1353 n2, I can connect to it fine, but I am not given an IP address. If I assign myself a static IP I can browse the network without any problems. Some other laptops are able to connect and get an IP without any problems. It…
Rob White
  • 463
  • 8
  • 16
1
2 3