Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [draytek]

52 questions
18
votes
5 answers

Any reason not to enable DoS Defense in my router?

I recently found a DoS Defense setting in my DrayTek Vigor 2830 router, which is disabled as default. I'm running a very small server on this network and I take it very serious to have the server up and running 24/7. I'm a bit unsure if the DoS…
ThomasCle
  • 305
  • 1
  • 4
  • 10
5
votes
1 answer

Assign static IP by MAC address on openVPN

Our business is currently running a VPN using OpenVPN on a server we host ourselves. We have a need to lock down our internal network for client reasons - so the desired outcome is that only whitelisted hardware/MAC addresses can connect to our…
shaneoh
  • 404
  • 3
  • 7
  • 18
5
votes
1 answer

Draytek Vigor 2820 static IP's

I have a Draytek Vigor 2820 router which is connected to our ADSL provider (British Telecom, BT). We currently have one static IP address which is accessible from anywhere outside of our network and points at a simple web server on port 80. We…
dannymcc
  • 2,677
  • 10
  • 46
  • 72
4
votes
2 answers

Routing between two routers with static routes

I have a Draytek 3200 router and a pfsense rackmount router that I am trying to get to route to each other. I have a subnet on each router and a subnet for the link between, as shown here: As it stands at the moment I can ping from the Draytek…
dannymcc
  • 2,677
  • 10
  • 46
  • 72
3
votes
2 answers

Setting up RADIUS Server for use by a VPN device

Currently we have a Vigor 3300 router that acts as our VPN server. At the moment we set up connections for home workers manually in the device. What I would like to do is remove this extra step and instead allow them to use their Active Directory…
Martin
  • 552
  • 4
  • 14
  • 25
2
votes
1 answer

Connection SSH port 22 via domain name but not public ip address

I have a Draytek router configured to port forward SSH connections to an internal server from specific ip addresses only. Clients and myself can connect externally successfully except one who cannot connect to our router's public static ip address…
Squid_Vicious
  • 87
  • 1
  • 1
  • 9
2
votes
2 answers

Draytek 2830, Multiple VLANS on Same Port

The Kit Ubiquiti Unifi Long Range Wireless Access Point Cisco SG200-08P Switch (VLAN, POE Support) Draytek 2830VN Router The Problem I need to enable Multiple VLANS against a single port on the Draytek 2830VN Router as I have Two Networks setup on…
Stuart
  • 203
  • 1
  • 3
  • 11
2
votes
1 answer

What's the correct way to step a Draytek 3510 IP PBX to avoid line echo?

I've setup a Draytek 3510 IP PBX with 10 VigorPhone 350 handsets. It's all connected through an unmanaged 48port gigabit switch - all structured cabling except patch leads are Cat6. Dhcp is handed out by a Linux server. All PC's and phones are on…
fistameeny
  • 317
  • 1
  • 8
  • 18
2
votes
2 answers

VPN Trunk Between Cisco ASA 5520 and DrayTek Vigor 2930

I'm a bit of a VPN newbie, so please go easy on me ... I'm trying to use the VPN trunking capabilities of the DrayTek Vigor 2930 firewall to bond two IPSec VPN connections to a Cisco ASA 5520 device and I'm getting myself tied in knots and hope…
David Heggie
  • 222
  • 1
  • 3
  • 14
2
votes
3 answers

Block certain urls on Draytek 2820n

I am trying to block certain URL's on my Draytek 2820n router, but am having trouble making it work. Can someone give the steps to setting up blocking www.ebay.co.uk please. Also, can you then let certain IP's circumvent these rules? Any help is…
David
2
votes
2 answers

Network seems to break down without warning in irregular intervals

I know this one is a tricky one because the problem could potentially be caused by quite a few different things. However maybe you've come across something similar or have some hints or tips of how I may be successful in debugging the current…
luxerama
  • 189
  • 5
2
votes
2 answers

Packet loss over DSL WAN with new router

My company recently purchased a DrayTek Vigor 2920n to replace an ancient Linksys router that connects to the office DSL service (AT&T). As it's a DSL service from AT&T, the router WAN connection is configured for PPPoE with an MTU of 1492. I've…
Grant Limberg
  • 173
  • 1
  • 9
1
vote
1 answer

Dedicated IP for webserver through pfsense and a draytek 2860

We have a leased line which has 8 public IP addresses. This connects to our Draytek 2860 router. From here we have an internal network which we use for our office computers and another network for our datacentre (which hosts a few customer…
user1711657
  • 13
  • 2
1
vote
0 answers

DrayTek Single Static IP routing

This is the current configuration of our DrayTek Vigor 2925: dynamic IP configured on WAN1 WAN1 feeds LAN1 which is connected to a switch. LAN2 is currently connected to a Linux server. ISP gave a single static IP (NOT A BLOCK), gateway, subnet,…
Tyler Christian
  • 111
  • 2
1
vote
0 answers

Draytek Vigor2926ac Port Redirection across WANs

I have a DrayTek 2926ac router which has an Ethernet feed as it's primary WAN and a 4G router (factory default settings + APN) as the Failover WAN. When I disable the primary WAN, the failover WAN activates and internet is restored. However the port…
Mark Smith
  • 111
  • 2
1
2 3 4