Sentinel-5 Precursor

Sentinel-5 Precursor (Sentinel-5P) is an Earth observation satellite developed by ESA as part of the Copernicus Programme to close the gap in continuity of observations between Envisat and Sentinel-5.[4]

Sentinel-5 Precursor
Sentinel-5P model
ManufacturerAstrium UK
OperatorESA
ApplicationsAtmospheric composition, air pollution, ozone layer monitoring
Specifications
Spacecraft typeSatellite
BusAstrobus-L 250 M[1]
Design life7 years
Launch mass900 kilograms (2,000 lb)
Dry mass820 kilograms (1,810 lb)
Dimensions1.40 m × 0.65 m × 0.75 m (4.59 ft × 2.13 ft × 2.46 ft) – height × width × length[2]
Power1500 watts
Batteries156 Ah
EquipmentTROPOMI
Production
StatusOperational
Built1
On order0
Launched1
Operational1
Maiden launch13 October 2017 [3]
Related spacecraft
Subsatellite ofSentinel constellation
← Sentinel-4 Sentinel-5 →

Overview

Sentinel-5 Precursor is the first mission of the Copernicus Programme dedicated to monitoring air pollution. Its instrument is an ultraviolet, visible, near and short-wavelength infrared spectrometer called Tropomi. The Satellite is built on a hexagonal Astrobus L 250 satellite bus equipped with S- and X-band communication antennas, three foldable solar panels generating 1500 watts and hydrazine thrusters for station-keeping.[1][2]

The satellite operates in an 824 km Sun-synchronous orbit with a Local Time of Ascending Node of 13:30 hours.

Tropomi

Tropomi (TROPOspheric Monitoring Instrument) is a spectrometer sensing ultraviolet (UV), visible (VIS), near (NIR) and short-wavelength infrared (SWIR) to monitor ozone, methane, formaldehyde, aerosol, carbon monoxide, NO2 and SO2 in the atmosphere. It extends the capabilities of the OMI from the Aura satellite and the SCIAMACHY instrument from Envisat.[5]

Tropomi will be taking measurements every second covering an area of approximately 2600 km wide and 7 km long in a resolution of 7 x 7 km. Light will be separated into different wavelengths using grating spectrometers and then measured with four different detectors for respective spectral bands. The UV spectrometer has a spectral range of 270-320 nm, the visible light spectrometer has a range of 310-500 nm, NIR has a range of 675-775 nm, and SWIR has a range of 2305-2385 nm.[6]

The instrument is split into four major blocks: UV-VIS-NIR spectrometers and a calibration block, SWIR spectrometer with its optics, instrument control unit and a cooling block. The total mass of Tropomi will be 200 kg with a power consumption of 170 watts on average and a data output of 140 Gbit per orbit.[6][1]

The instrument was built by a joint venture between the Netherlands Space Office, Royal Netherlands Meteorological Institute, Netherlands Institute for Space Research, Netherlands Organisation for Applied Scientific Research and Airbus Defence and Space Netherlands.[7][8]

The SWIR spectrometer was designed and built by the Optical Payloads Group of Surrey Satellites (SSTL); it employs an immersed grating design in which light impinges upon an etched grating from within a high-index substrate (silicon in this case). The reduced wavelength within the refractive medium permits an efficient, space-saving design. The SWIR grating was provided by SRON (Netherlands), who also provided the Front-End Electronics (FEE). The SWIR spectrometer receives light from the main instrument via an intermediate pupil, and directs this - via a telescope - towards a slit which defines the along-track footprint of the instrument on the ground. Light from the slit is re-collimated, diffracted by the immersed-grating at high-order and finally imaged onto a two-dimensional detector by a high aperture relay lens. The SWIR detector (furnished by Sofradir, France) has 256 elements in the across-track direction and 1024 elements in the spectral direction (the element pitch is 30 microns); it is operated cold (typically 140 K). The SWIR spectrometer optics are mounted on a cooled optical bench (approximately 200K) and the instrument is insulated by a multiple-layer insulation (MLI) blanket. The SWIR instrument was aligned, focussed and characterised at the Mullard Space Science laboratory thermal vacuum facility in Surrey, UK.

The Tropospheric Monitoring Instrument provides the most detailed methane emissions monitoring available. It has a resolution of about 50 square kilometres.[9]

History

The first large contract for Sentinel-5P was signed in July 2009 for Tropomi instrument between the European Space Agency and Dutch Ministry of Economic Affairs which contributed €78 million.[7] On 8 December 2011, ESA selected Astrium UK as a prime contractor for the satellite, signing contract worth €45.5 million.[10] Construction of the satellite itself was completed in May 2014, and integration with its primary instrument has been completed successfully.[11] From design to launch Tropomi cost €220 million.[12]

The satellite was launched by Eurockot Launch Services onboard Rokot.[3] The launch was originally planned for late 2014, but had been postponed multiple times, before occurring on 13 October 2017 at 09:27 UTC from Plesetsk Cosmodrome Site 133. Sentinel-5P successfully reached its final orbit 79 minutes after lift-off from the Plesetsk cosmodrome.[13]

Monitoring during 2019–2020 coronavirus pandemic

The Tropomi instrument on the 5P satellite, showed substantial reductions in nitrogen dioxide amounts over Chinese cities between late-January and February 2020. These were linked to China's response to the coronavirus pandemic which greatly reduced industrial and other polluting activities.[14]

gollark: Or be very collision-prone on that sort of data?
gollark: The hash function would have to have a really tiny range for short words to frequently collide like that.
gollark: Citrons saying them around the same time, mostly.
gollark: I was accidentally not actually prime-factoring it (oops), but it's still unsorted given that.
gollark: I may need to optimize this, the computations are now taking SECONDS to run.

References
  1. "Sentinel 5 Data Sheet" (PDF). ESA. August 2013. Retrieved 6 September 2014.
  2. "Copernicus: Sentinel-5P (Precursor - Atmospheric Monitoring Mission)". eoPortal. Retrieved 6 September 2014.
  3. "ESA books Eurockot Launch for Sentinel-5p Satellite". Eurockot Launch Services. 29 January 2014. Retrieved 6 September 2014.
  4. "Sentinels -4/-5 and -5P". ESA. Retrieved 6 September 2014.
  5. "TROPOMI". Retrieved 6 September 2014.
  6. "TROPOMI: Instrument". Archived from the original on 13 August 2014. Retrieved 6 September 2014.
  7. "Agreement between the Netherlands and ESA signed for Sentinel-5 Precursor instrument". ESA. 6 July 2009. Retrieved 6 September 2014.
  8. "Sentinel 5-Precursor/TROPOMI". Netherlands Institute for Space Research. Archived from the original on 4 March 2016. Retrieved 6 September 2014.
  9. Tollefson, Jeff (2018-04-11). "US environmental group wins millions to develop methane-monitoring satellite". Nature. 556 (7701): 283. doi:10.1038/d41586-018-04478-6. PMID 29666485.
  10. "ESA selects Astrium to build Sentinel-5 Precursor satellite". ESA. 8 December 2011. Retrieved 6 September 2014.
  11. "Platform brings air monitoring a step closer". ESA. 27 May 2014. Retrieved 6 September 2014.
  12. "NLR essential link in Tropomi data processing". Oct 13, 2017. Retrieved Sep 26, 2018.
  13. https://earth.esa.int/web/guest/missions/esa-eo-missions/sentinel-5p/news/-/article/air-quality-monitoring-satellite-in-orbit
  14. "COVID-19: nitrogen dioxide over China". March 24, 2020. Retrieved March 24, 2020.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.