Sprengpatrone

The Sprengpatrone or "explosive cartridge" in English was a rifle grenade that was developed by Germany and used by the Wehrmacht during World War II. The Sprengpatrone was designed to be fired from a Kampfpistole flare gun.

Sprengpatrone
A schematic of components.
TypeRifle grenade
Place of origin Nazi Germany
Service history
Used byWehrmacht
WarsWorld War II[1]
Specifications
MassComplete: 140 g (5 oz)
Projectile: 99 g (3.5 oz)
Length76 mm (3 in)
Diameter25 mm (1 in)[1]
WarheadPETN
Warhead weight22 g (.77 oz)
Detonation
mechanism
Nose fuze[1]

Design

The Sprengpatrone was a rifle grenade that could be fired from the Kampfpistole. The Kampfpistole was a rifled single-shot break action gun and the cartridge was breech loaded. The Kampfpistole was a rifled variant of the earlier Leuchtpistole 34. The Sprengpatrone was designed to give German troops a small and lightweight grenade launcher for engaging targets from close range which could not be engaged satisfactorily by infantry weapons or artillery without endangering friendly troops. The Sprengpatrone was used for low angle direct fire where range and accuracy were needed. It was not recommended for use beyond 180 m (200 yd) due to inaccuracy or less than 46 m (50 yd) due to the risk from shell fragments.[2]

This grenade consists of a aluminum cartridge case, a percussion cap in the center of the base, black powder propellant charge, an internal steel projectile filled with PETN and was topped by a nose fuze. The projectile had a rifled aluminum external sleeve which engages the rifling of the Kampfpistole barrel. The nose fuze contains a striker head that is held away from the detonator by six steel balls kept in position by a steel collar supported by three aluminum pins. A creep spring separates the striker and primer from the booster which is separated from the explosive filling by an empty air space. When the projectile hits the target the noze fuse ignites the primer which in turn ignites the booster and the explosives.[1]

  • Leuchtpistole 34.
gollark: And I think that should actually be encoded in the type.
gollark: But, as it also says, it has to be treated specially and cannot be entirely used like a normal pointer.
gollark: Also, the README here seems to suggest just using a pointer.
gollark: If it actually had a reasonable import system, you would not have to worry about stuff colliding very much.
gollark: The other one just used `int*`.

References
  1. unknown (1 August 1945). Catalog Of Enemy Ordnance Material. www.paperlessarchives.com/FreeTitles/CatalogOfEnemyOrdnanceMateriel.pdf: Office of the chief of ordnance. p. 326.
  2. United States. War Department. Military Intelligence Division (1943-01-01). Tactical And Technical Trends, Nos. 21-30.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.