SNAP-10A
SNAP-10A (Systems for Nuclear, Auxiliary Power[3], aka Snapshot for Space Nuclear Auxiliary Power Shot, also known as OPS 4682, COSPAR 1965-027A[4]) was a US experimental nuclear powered satellite launched into space in 1965[5] as part of the SNAPSHOT program.[6][4] The test marked the world's first operation of a nuclear reactor in orbit,[7][8] and also the first operation of an ion thruster system in orbit. It is the only fission reactor power system launched into space by the United States. The reactor stopped working after just 43 days due to a non-nuclear electrical component failure.[9] The Systems Nuclear Auxiliary Power Program (SNAP) reactor was specifically developed for satellite use in the 1950s and early 1960s under the supervision of the U.S. Atomic Energy Commission.[10][11]
Image of SNAP 10A Space Nuclear Power Plant | |
Mission type | Engineering |
---|---|
Operator | USAF |
COSPAR ID | 1965-27A |
SATCAT no. | 01314 |
Mission duration | 43 days |
Spacecraft properties | |
Manufacturer | Atomics International |
Launch mass | 440 kg (970 lb) |
Start of mission | |
Launch date | 3 April 1965, 21:25 |
Rocket | Atlas-Agena D |
Launch site | Vandenberg AFB, PALC2-4[1] |
Orbital parameters | |
Reference system | Geocentric |
Regime | Low Earth |
Eccentricity | 0.00319 |
Perigee altitude | 1,268 km (788 mi) |
Apogee altitude | 1,317 km (818 mi) |
Inclination | 90.2° |
Period | 111.4 minutes[2] |
Epoch | 3 April 1965 |
Systems for Nuclear Auxiliary Power |
History
The Systems for Nuclear Auxiliary Power (SNAP) program developed as a result of Project Feedback, a Rand Corporation study of reconnaissance satellites completed in 1954.[12] As some of the proposed satellites had high power demands, some as high as a few kilowatts, the U.S. Atomic Energy Commission (AEC) requested a series of nuclear power-plant studies from industry in 1951. Completed in 1952, these studies determined that nuclear power plants were technically feasible for use on satellites.[13]:5
In 1955, the AEC began two parallel SNAP nuclear power projects. One, contracted out to The Martin Company, used radio-isotopic decay as the power source for its generators; these plants were given odd-numbered SNAP designations beginning with SNAP-1. The other project used nuclear reactors to generate energy, and was developed by the Atomics International Division of North American Aviation. Their systems were given even-numbered SNAP designations, the first being SNAP-2.[13]:5
SNAP-10A was the first Atomics International, nuclear-reactor power system built for use in space. Evolved from the SNAP-10 300 watt design, SNAP-10A fulfilled a 1961 Department of Defense requirement for a 500 watt system.[13]:5,7
Most of the systems development and reactor testing was conducted at the Santa Susana Field Laboratory, Ventura County, California using a number of specialized facilities.[14]
Construction
The SNAP-10A has three major components – a compact nuclear reactor, the reactor reflector and control system, a heat transfer and power conversion system.
The reactor measures 39.62 cm (15.6 in) long, 22.4 cm (8.8 in) diameter and holds 37 fuel rods containing 235U as uranium-zirconium-hydride fuel.[15] The SNAP-10A reactor was designed for a thermal power output of 30 kW and unshielded weighs 650 lb (290 kg). The reactor can be identified at the top of the SNAP-10A unit.[16]
Reflectors were arranged around the outside of the reactor to provide the means to control the reactor. The reflectors were composed of a layer of beryllium, which would reflect neutrons, thus allowing the reactor to begin and maintain the fission process. The reflectors were held in place by a retaining band anchored by an explosive bolt. When the reflector was ejected from the unit, the reactor could not sustain the nuclear fission reaction and the reactor permanently shut down.
The eutectic sodium-potassium (NaK) alloy was used as a coolant in the SNAP-10A. The NaK was circulated through the core and thermoelectric converters by a liquid metal direct current conduction-type pump. The thermoelectric converters (identified as the long white "apron") are doped silicon germanium materials, thermally coupled, but electrically isolated from the NaK heat transfer medium. The temperature difference between the NaK on one side of the thermoelectric converter and the cold of space on the other created an electric potential and usable electricity.[17]
SNAPSHOT mission
Launch and orbital operation
SNAP-10A was launched from Vandenberg Air Force Base by an ATLAS Agena D rocket on 3 April 1965 into a low Earth orbit altitude of approx. 1,300 km. It is in a slightly retrograde polar orbit[18] — this ensured that the spent rocket stages landed in the ocean. Its nuclear electrical source, made up of thermoelectric elements, was intended to produce over 500 watts of electrical power for one year.[19][20] After 43 days, an onboard voltage regulator within the spacecraft – unrelated to the SNAP reactor – failed, causing the reactor core to be shut down, after reaching a maximum output of 590 watts.[15][21]
After the 1965 system failure, the reactor was left in a 1,300-kilometre (700 nmi) Earth orbit for an expected duration of 4,000 years.[10][22][23]
In November 1979 the vehicle began shedding, eventually losing 50 pieces of traceable debris. The reasons were unknown, but the cause could have been a collision. Although the main body remains in place, radioactive material may have been released. Later research, published in 2008 and based on Haystack data, suggests that there are another 60 or more pieces of debris of size <10 cm [21][24]
Ion propulsion
The SNAPSHOT test included a cesium ion thruster as a secondary payload, the first test of an electrically powered spacecraft propulsion system to operate in orbit (following the SERT-1 suborbital test in 1964). The ion-beam power supply was operated at 4500 V and 80 mA to produce a thrust of about 8.5 mN.[6] The ion engine was to be operated off batteries for about one hour, and then the batteries were to be charged for approximately 15 hours using 0.1 kW of the nominal 0.5 kW SNAP system as the power supply. The ion engine operated for a period of less than 1 hour before being commanded off permanently. Analysis of flight data indicated a significant number of high-voltage breakdowns, and this apparently caused electromagnetic interference (EMI), causing attitude perturbations of the spacecraft. Ground tests indicated that the engine arcing produced conducted and radiated EMI significantly above design levels.
Safety
The SNAP reactor program necessitated a safety program and led to the inception of the Aerospace Nuclear Safety Program. The program was established to evaluate the nuclear hazards associated with the construction, launch, operation and disposal of SNAP systems and to develop designs to assure their radiological safety.
Atomics International had primary responsibility for safety, while Sandia National Laboratories was responsible for the Aerospace Safety Independent Review and conducted many of the safety tests. Before launch was permitted, proof had to be obtained that under all circumstances the launch of the reactor would not pose a serious threat.
A variety of tests were successfully completed and several videos of the development and tests are available for viewing.[25] The Idaho National Laboratory conducted three destructive tests of SNAP nuclear reactors at Test Area North prior to the launch of SNAP-10A.[26] The SNAPTRAN-3 destructive experiment, on 1 April 1964, simulated a rocket crash into the ocean, purposely sending radioactive debris across the Idaho desert.
The testing and development involving radioactive materials caused environmental contamination at the former Atomics International Santa Susana Field Laboratory (SSFL) facilities. The United States Department of Energy is responsible for the identification and cleanup of the radioactive contamination. (The SSFL was also used for the unrelated testing and development of rocket engines by Rocketdyne primarily for NASA.) The DOE website supporting the site cleanup[27] details the historical development of nuclear energy at SSFL including additional SNAP testing and development information.
Related work and follow-on programs
Atomics International also developed and tested other compact nuclear reactors including the SNAP Experimental Reactor (SER), SNAP-2, SNAP-8 Developmental Reactor (SNAP8-DR) and SNAP-8 Experimental Reactor (SNAP-8ER) units at the Santa Susana Field Laboratory (see Systems for Nuclear Auxiliary Power article). Atomics International also built and operated the Sodium Reactor Experiment, the first U.S. nuclear power plant to supply electricity to a public power system.
As of 2010, more than 30 small fission power system nuclear reactors have been sent into space in Soviet RORSAT satellites; also, over 40 radioisotope thermoelectric generators have been used globally (principally US and USSR) on space missions.[10]
See also
- Nuclear power in space
- RORSAT, the Soviet Union nuclear reactor powered satellites.
- Safe Affordable Fission Engine, NASA experimental series
References
- McDowell, Jonathan. "Launch Log". Jonathon's Space Report. Retrieved 9 April 2020.
- "Snapshot". NASA Space Science Data Coordinated Archive. Retrieved 9 April 2020.
- "News In Brief: Nuclear Reactor For Space". The Canberra Times. 36 (10, 203). Australian Capital Territory, Australia. 18 April 1962. p. 3. Retrieved 12 August 2017 – via National Library of Australia., ...the reactor would "be known as "Snaps 10a" for "Systems for Nuclear Auxiliary Power"...
- Snapshot, Gunther's Space Page. Retrieved 3 April 2019.
- "Reactor goes into space". The Canberra Times. 39 (11, 122). Australian Capital Territory, Australia. 5 April 1965. p. 1. Retrieved 12 August 2017 – via National Library of Australia.
- SNAPSHOT, NASA Glenn Research Center, March 20, 2007. Retrieved 3 April 2019.
- "History of US Astronuclear Reactors part 1: SNAP-2 and 10A", Beyond NERVA, April 3, 2019. Retrieved 3 April 2019.
- Andrew LePage, "The First Nuclear Reactor in Orbit", Drew Ex Machina, April 3, 2015. Retrieved 3 April 2019.
- Nuclear Reactors for Space, Briefing Paper # 82, January 2004
-
Mason L, Bailey S, Bechtel R, Elliott J, Fleurial JP, Houts M, Kapernick R, Lipinski R, MacPherson D, Moreno T, Nesmith B, Poston D, Qualls L, Radel R, Weitzberg A, Werner J (18 November 2010). "Small Fission Power System Feasibility Study – Final Report". NASA/DOE. Retrieved 3 October 2015.
Space Nuclear Power: Since 1961 the U.S. has flown more than 40 Radioisotope Thermoelectric Generators (RTGs) with an essentially perfect operational record. The specifics of these RTGs and the missions they have powered have been thoroughly reviewed in the open literature. The U.S. has flown only one reactor, which is described below. The Soviet Union has flown only 2 RTGs and had shown a preference to use small fission power systems instead of RTGs. The USSR had a more aggressive space fission power program than the U.S. and flew more than 30 reactors. Although these were designed for short lifetime, the program demonstrated the successful use of common designs and technology.
- Lords, R. E. (August 1994), SNAP and AI Fuel Summary Report, Westinghouse Idaho Nuclear Company, Inc., doi:10.2172/10182034, OSTI 10182034, WINCO-1222, UC-510
- J. E. Lipp; Robert M. Salter. "Project Feedback Summary Report Volume I". RAND. Retrieved 11 April 2020.
- William R. Corliss (1966). SNAP NUCLEAR POWER REACTORS. U.S. Atomic Energy Commission/Division of Technical Information.
- "SNAP Overview". U.S. Department of Energy. Retrieved 9 April 2020.
- Schmidt, Glen (February 2011). "SNAP Overview – general background" (PDF). American Nuclear Society. Retrieved 27 August 2012.
- Voss, Susan (August 1984). SNAP Reactor Overview (PDF). Kirtland AFB, New Mexico: U.S. Air Force Weapons Laboratory. AFWL-TN-84-14. Retrieved 19 September 2018.
- Schmidt, G.L. (September 1988). SNAP 10A Test Program. Rockwell International, Canoga Park, California. DCN: SP-100-XT-0002.
- "Snapshot – Orbit". www.heavens-above.com. Retrieved 15 June 2016.
Inclination: 90,3084°
– an object with an inclination between 90 and 180 degrees is in a retrograde orbit. - "SNAP Overview". USDOE ETEC. Archived from the original on 15 February 2013. Retrieved 14 April 2012.CS1 maint: BOT: original-url status unknown (link)
- Bennett, Gary L. (2006). "Space Nuclear Power: Opening the Final Frontier" (PDF). American Institute of Aeronautics and Astronautics. p. 17. Retrieved 3 April 2010.
- Portree, David S. F; Loftus, Jr., =Joseph P. (January 1999). "Orbital Debris: A Chronology" (PDF). NASA: 29–31. TP-1999-208856. Archived from the original (PDF) on 1 September 2000. Cite journal requires
|journal=
(help) - Staub, D.W. (25 March 1967). SNAP 10 Summary Report. Atomics International Division of North American Aviation, Inc., Canoga Park, California. NAA-SR-12073.
- "U.S. ADMISSION : Satellite mishap released rays". The Canberra Times. 52 (15, 547). Australian Capital Territory, Australia. 30 March 1978. p. 5. Retrieved 12 August 2017 – via National Library of Australia., ...Launched in 1965 and carrying about 4.5 kilograms of uranium 235, Snap 10A is in a 1,000-year orbit....
- Stokely, C.; Stansbury, E. (2008), "Identification of a debris cloud from the nuclear powered SNAPSHOT satellite with Haystack radar measurements", Advances in Space Research, 41 (7), pp. 1004–1009, Bibcode:2008AdSpR..41.1004S, doi:10.1016/j.asr.2007.03.046, hdl:2060/20060028182
- "ETEC - Videos". Archived from the original on 4 February 2017. Retrieved 12 January 2018.
- Stacy, Susan M. (2000). Proving the Principle: A History of The Idaho National Engineering and Environmental Laboratory, 1949–1999 (PDF). U.S. Department of Energy, Idaho Operations Office. ISBN 978-0-16-059185-3. Chapter 17: Science in the Desert.
- "U.S. DOE Nuclear Energy Development at SSFL". Archived from the original on 4 August 2017. Retrieved 12 January 2018.