Pioneer program

The Pioneer programs were two series of United States lunar and planetary space probes exploration. The first program, which ran from 1958 to 1960, unsuccessfully attempted to send spacecraft to orbit the Moon, successfully sent one spacecraft to fly by the Moon, and successfully sent one spacecraft to investigate interplanetary space between the orbits of Earth and Venus. The second program, which ran from 1965 to 1992, sent four spacecraft to measure interplanetary space weather, two to explore Jupiter and Saturn, and two to explore Venus. The two outer planet probes, Pioneer 10 and Pioneer 11, became the first of five artificial objects to achieve the escape velocity that will allow them to leave the Solar System, and carried a golden plaque depicting a man and a woman and information about the origin and the creators of the probes, in case any extraterrestrials find them someday.

Early (1958) series Pioneer lunar orbiter
CountryUnited States
Organization
PurposeLunar and interplanetary exploration
StatusCompleted
Program history
Duration
  • 1958–1960
  • 1965–1992
Maiden flightPioneer 0 August 17, 1958
Last flightPioneer Venus August 1978
Successes9
Failures10
Partial failures1
Launch site(s)Cape Canaveral Air Force Station
Vehicle information
Launch vehicle(s)

Naming

Credit for naming the first probe has been attributed to Stephen A. Saliga, who had been assigned to the Air Force Orientation Group, Wright-Patterson AFB, as chief designer of Air Force exhibits. While he was at a briefing, the spacecraft was described to him, as, a "lunar-orbiting vehicle, with an infrared scanning device." Saliga thought the title too long, and lacked theme for an exhibit design. He suggested, "Pioneer", as the name of the probe, since "the Army had already launched and orbited the Explorer satellite, and their Public Information Office was identifying the Army, as, 'Pioneers in Space,'" and, by adopting the name, the Air Force would "make a 'quantum jump' as to who, really, [were] the 'Pioneers' in space.'"[1]

Early missions

Lunar flyby spacecraft (Pioneer 3, 4)

The earliest missions were attempts to achieve Earth's escape velocity, simply to show it was feasible and to study the Moon. This included the first launch by NASA which was formed from the old NACA. These missions were carried out by the Air Force Ballistic Missile Division, Army, and NASA.[2]

Able space probes (1958–1960)

Pioneer P-1, P-3, 5, P-30, and P-31 probe
Most missions here are listed with their most recognized name, and alternate names after in parenthesis.
  • Pioneer 0 (Thor-Able 1, Pioneer) – Lunar orbiter, destroyed (Thor failure 77 seconds after launch) August 17, 1958
  • Pioneer 1 (Thor-Able 2, Pioneer I) – Lunar orbiter, missed Moon (third stage partial failure) October 11, 1958
  • Pioneer 2 (Thor-Able 3, Pioneer II) – Lunar orbiter, reentry (third stage failure) November 8, 1958
  • Pioneer P-1 (Atlas-Able 4A, Pioneer W), Launch vehicle lost September 24, 1959
  • Pioneer P-3 (Atlas-Able 4, Atlas-Able 4B, Pioneer X) – Lunar probe, lost in launcher failure November 26, 1959
  • Pioneer 5 (Pioneer P-2, Thor-Able 4, Pioneer V) – interplanetary space between Earth and Venus, launched March 11, 1960[3]
  • Pioneer P-30 (Atlas-Able 5A, Pioneer Y) – Lunar probe, failed to achieve lunar orbit September 25, 1960
  • Pioneer P-31 (Atlas-Able 5B, Pioneer Z) – Lunar probe, lost in upper stage failure December 15, 1960

Juno II lunar probes (1958–1959)

Later missions (1965–1978)

Later series Pioneer probes: A–E; 10 and 11; Venus Orbiter; and Venus Multiprobe

Five years after the early Able space probe missions ended, NASA Ames Research Center used the Pioneer name for a new series of missions, initially aimed at the inner Solar System, before the flyby missions to Jupiter and Saturn. While successful, the missions returned much poorer images than the Voyager program probes would five years later. In 1978, the end of the program saw a return to the inner Solar System, with the Pioneer Venus Orbiter and Multiprobe, this time using orbital insertion rather than flyby missions.

The new missions were numbered beginning with Pioneer 6 (alternate names in parentheses).

Interplanetary weather

The spacecraft in Pioneer missions 6, 7, 8, and 9 comprised a new interplanetary space weather network:

  • Pioneer 6 (Pioneer A) – launched December 1965
  • Pioneer 7 (Pioneer B) – launched August 1966
  • Pioneer 8 (Pioneer C) – launched December 1967
  • Pioneer 9 (Pioneer D) – launched November 1968 (inactive since 1983)
  • Pioneer E – lost in launcher failure August 1969

Pioneer 6 and Pioneer 9 are in solar orbits with 0.8 AU distance to the Sun. Their orbital periods are therefore slightly shorter than Earth's. Pioneer 7 and Pioneer 8 are in solar orbits with 1.1 AU distance to the Sun. Their orbital periods are therefore slightly longer than Earth's. Since the probes' orbital periods differ from that of the Earth, from time to time, they face a side of the Sun that cannot be seen from Earth. The probes can sense parts of the Sun several days before the Sun's rotation reveals it to ground-based Earth orbiting observatories.

Outer Solar System missions

Map showing location and trajectories of the Pioneer 10 (blue), Pioneer 11 (green), Voyager 1 (purple) and Voyager 2 (red) spacecraft, as of April 4, 2007
The Pioneer plaque attached to Pioneers 10 and 11

Venus project

  • Pioneer Venus Orbiter (Pioneer Venus 1, Pioneer 12) – launched May 1978
  • Pioneer Venus Multiprobe (Pioneer Venus 2, Pioneer 13) – launched August 1978
    • Pioneer Venus Probe Bus – transport vehicle and upper atmosphere probe
    • Pioneer Venus Large Probe – 300 kg parachuted probe
    • Pioneer Venus North Probe – 75 kg impactor probe
    • Pioneer Venus Night Probe – 75 kg impactor probe
    • Pioneer Venus Day Probe – 75 kg impactor probe
gollark: Yes, like DTel but stupider.
gollark: AutoBotRobot has an entire fourteen (14) (0b1110) servers so it would be very useful.
gollark: There would also be an index and "dial random place" function.
gollark: You would configure a channel for making/receiving calls, and it would be assigned a "number" (maybe four random words, even) with which other people could apiocall (alternative name pending) you.If you take an apiocall, you would then temporarily have messages be apioformically transmitted between the servers on each end until someone ends it.
gollark: So, I was thinking about an AutoBotRobot "phone" system:

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.