Nooitgedacht, Veenoord

Nooitgedacht (English: Would never have thought it) is a smock mill in Veenoord, Drenthe, in the Netherlands, which has been restored to working order. The mill was built (in its current location) in 1916 and is listed as a Rijksmonument, number 33786.[1]

Nooitgedacht, Veenoord
Nooitgedacht, February 2009
Origin
Mill nameNooitgedacht
Mill locationIndustrieweg 15, 7844 NV Veenoord
Coordinates52°42′02″N 6°50′47″E
Operator(s)Beheerstichting Molen Nooitgedacht, owner: Molenstichting Drenthe
Year built1916
Information
PurposeCorn mill
TypeSmock mill
StoreysTwo-storey smock
Base storeysThree-storey base
Smock sidesEight sides
No. of sailsFour sails
Type of sailsCommon sails
WindshaftCast iron
WindingTailpole and winch
No. of pairs of millstonesOne pair
Size of millstones1.40 metres (4 ft 7 in)

History

In 1862, a corn and barley mill was moved from Vlagtwedde and rebuilt close to the site of the present mill for miller Johannes van Aalst. This mill burnt down in 1904. To replace it, an oil mill was moved from Mensingeweer by millwright Van Ausselt.[2] This mill was struck by lightning and burnt down in 1916.[3] Van Ausselt and millwright Huberts, from Coevorden, moved a mill from Hankate, Overijssel, to replace it.[2] This was the third move for that mill, which was originally built in 1732 as a barley mill at Leeuwarden, Friesland. By 1749 it was also an oil mill. It was moved between 1786 and 1805 to Heerenveen, Friesland, where it was known as Het Fortuin (English: The Fortune).[4] In 1892 it was moved to Hankate, where the mill was known as the Molen van Kappert.[5] The mill was worked until at least 1952, when it was sold to the Instituut voor de Landbouw. In 1973 it was transferred to De Hollandsche Molen and later still to Stichting Drentse Molens (English: Drenthe Mills Society).[3]

Description

Nooitgedacht is what the Dutch describe as an "achtkante stellingmolen". It is a two-storey smock mill with a stage on a three-storey brick base. The stage is at second-floor level, 6.25 metres (20 ft 6 in) above ground level. The smock and cap are thatched. The mill is winded by a tailpole and winch. The four Common sails have a span of 22.00 metres (72 ft 2 in) and are carried in a cast-iron windshaft which was cast by Enthuizen in 1872. The windshaft also carries the brake wheel which has 73 cogs. This drives the wallower (48 cogs) at the top of the upright shaft. At the bottom of the upright shaft, the great spur wheel, which has 92 cogs, drives the 1.40 metres (4 ft 7 in) diameter French Burr stones via a lantern pinion stone nut with 20 staves.[1]

Millers
  • Johannes van Aalst (1916– )
  • B H van Aalst (1940–52)

Reference for above:[3]

Public access

Nooitgedacht is open to the public on Saturdays and when the mill is turning.[3]

gollark: Besides, if you write OpenCL instead of CUDA it could run on your laptop GPU.
gollark: Wrong.
gollark: I'm sure it's 3 ethical to use it for testing simple GPU compute things.
gollark: Again, Turing-complete.
gollark: You have 581as to learn.

References
  1. "Technische gegevens" (in Dutch). De Hollandsche Molen. Retrieved 19 October 2009. (Click on "Technische gegevens" to view.)
  2. "Geschiedenis" (in Dutch). De Hollandsche Molen. Retrieved 19 October 2009. (Click on "Geschiedenis" to view.)
  3. "Veenoord, Drenthe" (in Dutch). Molendatabase. Retrieved 19 October 2009.
  4. Stichting De Fryske Mole (1995). Friese Molens (in Dutch). Leeuwarden: Friese Pers Boekerij BV. p. 71. ISBN 90-330-1522-6.
  5. "Molen van Kappert, Hankate" (in Dutch). Molendatabase. Retrieved 19 October 2009.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.