De Wieker Meule, De Wijk

De Wieker Meule is a smock mill in De Wijk, Netherlands. It was built in 1829 and has been restored to working order. The mill is listed as a Rijksmonument, number 39657.[1]

De Wieker Meule
Origin
Mill nameDe Wieker Meule
Mill locationDorpsstraat 64, 7957 AS, De Wijk
Coordinates52°40′20″N 6°17′13″E
Operator(s)Stichting Wieker Meule
Year built1829
Information
PurposeCorn mill
TypeSmock mill
StoreysThree-storey smock
Base storeysTwo-storey base
Smock sidesEight sides
No. of sailsFour sails
Type of sailsCommon sails
WindshaftCast iron
WindingTailpole and winch
No. of pairs of millstonesTwo pairs of French Burrs
Size of millstones1.50 metres (4 ft 11 in)

History

De Wieker Meule was originally built in 1764 in De Leijen. In 1829, the mill was bought by Jacob Schiphorst Haalweide and moved to De Wijk. An extension was built against the base of the mill which housed two pairs of millstones driven by a diesel engine and later an electric motor. These were in addition to the two pairs of stones driven by the windmill. In 1926, the mill was bought by the Coöperative Landbouwbank. The ground floor was used at that time as a bank. In 1939, the sails of the mill were streamlined using the Dekker system. The mill cease to be used commercially in 1962.[2] Restoration of the mill started in 1978,[3] and was completed in 1980, with a new cap and sails. The Dekkerised sails were replaced with traditional Common sails. The Vereniging voor Vreemdelingenverkeer established an office in the base of the mill. In 1996, the mill was bought by the Stichting Wieker Meule (English: Wieker Mill Society).[2]

Description

De Wieker Meule what the Dutch describe as an "achtkante stellingmolen" - a smock mill with a stage. It is a three-storey smock mill on a two-storey base. The stage is at third-floor level, 8.70 metres (28 ft 7 in) above ground level. The smock and cap are thatched. The cap is winded by a tailpole and winch. The four Common sails, which span 22.50 metres (73 ft 10 in), are carried on a cast-iron windshaft, which was cast by millwright Enthoven in 1863. The windshaft carries a clasp arm brake wheel, which has 59 cogs. This drives the wallower (29 cogs) at the top of the upright shaft. At the bottom of the upright shaft the great spur wheel (105 cogs) drives two lantern pinion stone nuts, one having 34 staves and the other having 36 staves.[4] These drive the two pairs of 1.50 metres (4 ft 11 in) diameter French Burr millstones.[1]

Public access

De Wieker Meule is open to the public from 13:00 to 18:00 on Saturdays.[5]

gollark: Odd of them to block it when it's still in a draft form and not implemented in browsers (or at least not on by default).
gollark: Oh, I looked it up and they're blocking traffic which uses TLS 1.3 *and* the ESNI thing.
gollark: https://www.cloudflare.com/learning/ssl/what-is-encrypted-sni/
gollark: There's that encrypted SNI extension around but it's quite WIP and I don't think much supports it.
gollark: What? They totally can, TLS 1.3 doesn't do anything to hide the SNI.

References
  1. "Technische gegevens" (in Dutch). De Hollandsche Molen. Archived from the original on 24 July 2011. Retrieved 15 August 2009. (Click on "Technische gegevens" to view)
  2. "Geschiedenis van de Wieker Meule" (in Dutch). Stichting Weiker Meule. Archived from the original on 24 July 2011. Retrieved 15 August 2009.
  3. "Geschiedenis" (in Dutch). De Hollandsche Molen. Archived from the original on 24 July 2011. Retrieved 15 August 2009. (Click on "Geschiedenis" to view)
  4. "Techniek" (in Dutch). Stichting Weiker Meule. Archived from the original on 24 July 2011. Retrieved 15 August 2009.
  5. "Informatie" (in Dutch). De Hollandsche Molen. Archived from the original on 24 July 2011. Retrieved 15 August 2009. (Click on "Informatie" to view)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.