De Hantumermolen, Hantum

*De Hantumermolen, Hantum*
De Hantumermolen, Hantum
	De Hantumermolen, November 2006
Origin
Mill name	De Hantumermolen
Mill location	Stoepawei 19, 9147 BG Hantum
Coordinates	53°21′26″N 5°57′47″E
Operator(s)	Stichting Monumentenbeheer Dongeradeel
Year built	1880
Information
Purpose	Drainage mill
Type	Smock mill
Storeys	Three-storey smock
Base storeys	Single-storey base
Smock sides	Eight sides
No. of sails	Four sails
Type of sails	Common sails
Windshaft	Cast iron
Winding	Tailpole and winch
Type of pump	Archimedes' screw

De Hantumermolen is a smock mill in Hantum, Friesland, Netherlands which was built in 1880. The mill has been restored to working order. It is listed as a Rijksmonument, number 38619.[1]

History

De Hantumermolen was built in 1880 by millwright G R van Wierum of Janum. It was built for a group of five owners with the purpose of draining the 100 hectares (250 acres) Huntumerleeg. Circa 1932, the mill was fitted with four Patent sails.[2] The mill was working until 1957 when a stock broke.[3] The mill was then replaced by a pumping station powered by an electric motor. Restorations were undertaken in 1978 and 1994. The Patent sails were replaced with Common sails when the mill was restored in 1978.[2] A further restoration was undertaken in 1998.[4]

Description

De Hantumermolen is what the Dutch describe as an grondzeiler, a smock mill on a single-storey brick base. The mill is winded by tailpole and winch. The smock and cap are thatched.[2] The sails have a span of 22.00 metres (72 ft 2 in).[1] and are carried on a cast-iron windshaft, which was cast by Prins van Oranje, Den Haag. The windshaft also carries the brake wheel which has 63 cogs. This drives the wallower (32 cogs) at the top of the upright shaft. At the bottom of the upright shaft, the crown wheel, which has 43 cogs drives a gearwheel with 44 cogs on the axle of the Archimedes' screw. The axle of the Archimedes' screw is 370 millimetres (1 ft 3 in) diameter. The screw is 1.61 metres (5 ft 3 in) diameter and 4.91 metres (16 ft 1 in) long. It is inclined at 20° and each revolution of the screw lifts 1,172 litres (258 imp gal) of water.

Public access

De Hantumermolen is open by appointment or whenever the mill is working.[5]

gollark: I suppose that *technically* I could make potatOS not use its own RNG, but meh.

gollark: `rotl` is `bit32.lrotate`, and there does not seem to be a replacement for it.

gollark: CraftOS-PC seems to just not have it.

gollark: `bit32.lrotate`?

gollark: Oh, this is interesting, a difference in *bitops* I ended up noticing because of the potatOS RNG system.

References

"Technische gegevens" (in Dutch). De Hollandsche Molen. Archived from the original on 31 May 2012. Retrieved 6 March 2010. (Click on "Technische gegevens" to view.)
Stichting De Fryske Mole (1995). Friese Molens (in Dutch). Leeuwarden: Friese Pers Boekerij bv. p. 206. ISBN 90-330-1522-6.
"Hantum, Friesland" (in Dutch). Molendatabase. Retrieved 6 March 2010.
"Geschiedenis" (in Dutch). De Hollandsche Molen. Archived from the original on 31 May 2012. Retrieved 6 March 2010. (Click on "Geschiedenis" to view.)
"Informatie" (in Dutch). De Hollandsche Molen. Archived from the original on 31 May 2012. Retrieved 6 March 2010. (Click on "Informatie" to view.)

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[Tech-1] "Technische gegevens" (in Dutch). De Hollandsche Molen. Archived from the original on 31 May 2012. Retrieved 6 March 2010. (Click on "Technische gegevens" to view.)

[Friese-2] Stichting De Fryske Mole (1995). Friese Molens (in Dutch). Leeuwarden: Friese Pers Boekerij bv. p. 206. ISBN 90-330-1522-6.

[Data-3] "Hantum, Friesland" (in Dutch). Molendatabase. Retrieved 6 March 2010.

[History-4] "Geschiedenis" (in Dutch). De Hollandsche Molen. Archived from the original on 31 May 2012. Retrieved 6 March 2010. (Click on "Geschiedenis" to view.)

[Open-5] "Informatie" (in Dutch). De Hollandsche Molen. Archived from the original on 31 May 2012. Retrieved 6 March 2010. (Click on "Informatie" to view.)