Harry Goddard House

The Harry Goddard House is an historic house at 190 Salisbury Street in Worcester, Massachusetts. Built in 1905 for a local wire company executive, it is one of the city's finest examples of Colonial Revival architecture, and a significant residential design of local architect George Clemence. It was listed on the National Register of Historic Places in 1980.[1]

Harry Goddard House
Location190 Salisbury St., Worcester, Massachusetts
Coordinates42°16′43″N 71°48′35″W
Area1 acre (0.40 ha)
Built1905 (1905)
ArchitectClemence, George
Architectural styleColonial Revival
MPSWorcester MRA
NRHP reference No.80000525[1]
Added to NRHPMarch 5, 1980

Description and history

The Harry Goddard House is located northwest of downtown Worcester, at the northwest corner of Salisbury Street and Park Avenue. It is a large 2-1/2 story wood frame structure, with a hip roof and clapboarded exterior. Its front facade faces east toward Park Avenue, with the center section projecting slightly. The projection has rounded window bays flanking the former main entrance, which is sheltered by a single-story porch extending across the entire projecting section. There is a Palladian window above the entrance. A new entrance, added about 1930, is located near the southwest corner of the building, sheltered by a rounded porch enclosed by French doors.[2]

The house was designed by local architect George Clemence, and was built in 1905 for Harry Goddard, president of the Spencer Wire Company. The house was written up in a local magazine after its completion. Goddard, a prominent local businessman, entertained William Howard Taft, then the United States Secretary of War, at this house, which he named "Elmarion". At the time of its National Register listing in 1980, it remained in the hands of Goddard's descendants.[2]

gollark: I thought about this at a rate of 0.7 Hz per square metre, and decided that 8KiB was good enough even with a really wasteful metadata format.
gollark: Well, you'd add both if you think `length` is better, and want to support old reader code.
gollark: Since it's JSON and not a weird proprietary format you can always just add both to your generated tape images.
gollark: I don't know. I didn't consider the possibility of length.
gollark: Tracks have `start`, the place they start on the tape, `end`, where they end, `artist`, the person who wrote them, and `title`, the title of the track.

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.