Guy Newall

Guy Newall (18851937) was a British actor, screenwriter and film director. He was born on the Isle of Wight on 25 May 1885. He began his film career by acting in the 1915 film *The Heart of Sister Ann*. In 1920 he directed his first film, and went on to direct a further ten including The Chinese Puzzle before his death in 1937. He established a production company with George Clark whom he had met during the First World War, and they raised finance to construct a new studios at Beaconsfield Studios. Newall was married twice, to actresses Ivy Duke and Dorothy Batley.[1]

Guy Newall
Guy Newall in 1920.
Born25 May 1885
Died25 February 1937 (aged 51)
Hampstead, London, England, United Kingdom
OccupationFilm actor
Screenwriter
Film director
Years active1915 - 1937

Partial filmography

Director

Actor

gollark: This is underspecified because bee² you, yes.
gollark: All numbers are two's complement because bee you.
gollark: The rest of the instruction consists of variable-width (for fun) target specifiers. The first N target specifiers in an operation are used as destinations and the remaining ones as sources. N varies per opcode. They can be of the form `000DDD` (pop/push from/to stack index DDD), `001EEE` (peek stack index EEE if source, if destination then push onto EEE if it is empty), `010FFFFFFFF` (8-bit immediate value FFFFFFFF; writes are discarded), `011GGGGGGGGGGGGGGGG` (16-bit immediate value GGGGGGGGGGGGGGGG; writes are also discarded), `100[H 31 times]` (31-bit immediate because bee you), `101IIIIIIIIIIIIIIII` (16 bits of memory location relative to the base memory address register of the stack the operation is conditional on), `110JJJJJJJJJJJJJJJJ` (16 bit memory location relative to the top value on that stack instead), `1111LLLMMM` (memory address equal to base memory address of stack LLL plus top of stack MMM), or `1110NNN` (base memory address register of stack MMM).Opcodes (numbered from 0 in order): MOV (1 source, as many destinations as can be parsed validly; the value is copied to all of them), ADD (1 destination, multiple sources), JMP (1 source), NOT (same as MOV), WR (write to output port; multiple sources, first is port number), RE (read from input port; one source for port number, multiple destinations), SUB, AND, OR, XOR, SHR, SHL (bitwise operations), MUL, ROR, ROL, NOP, MUL2 (multiplication with two outputs).
gollark: osmarksISA™️-2028 is a VLIW stack machine. Specifically, it executes a 384-bit instruction composed of 8 48-bit operations in parallel. There are 8 stacks, for safety. Each stack also has an associated base memory address register, which is used in some "addressing modes". Each stack holds 64-bit integers; popping/peeking an empty stack simply returns 0, and the stacks can hold at most 32 items. Exceeding a stack's capacity is runtime undefined behaviour. The operation encoding is: `AABBBCCCCCCCCC`:A = 2-bit conditional operation mode - 0 is "run unconditionally", 1 is "run if top value on stack is 0", 2 is "run if not 0", 3 is "run if first bit is ~~negative~~ 1".B = 3-bit index for the stack to use for the conditional.C = 9-bit opcode (for extensibility).
gollark: By "really fast", I mean "in a few decaminutes, probably".

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.