Ferrari 246 F1

The Ferrari 246 F1 is a Ferrari racing car built for the Formula One World Championship of 1958.

This article is about 1958 Formula One car. For the 1960 Formula One car, see Ferrari 246 P. For the 1966 Formula One car, see Ferrari 246 F1-66. For the roadcar, see Dino (automobile).
Ferrari 246 F1
CategoryFormula One
ConstructorFerrari
Designer(s)Vittorio Jano
Carlo Chiti
Predecessor801
Successor246 P/156
Technical specifications
ChassisTubular aluminium body on chassis composed of two main elliptic tubes and other small tubes to form a light, rigid structure
Suspension (front)double wishbones, coil springs, telescopic dampers and anti-roll bar
Suspension (rear)DeDion axle, transverse upper leaf spring, two longitudinal radius arms, Houdaille lever dampers
EngineDino, 2,417.33 cc (147.5 cu in), 65° V6, naturally aspirated front engine, longitudinally mounted
TransmissionFerrari Type 523 4-speed manual
FuelShell
TyresDunlop
Competition history
Notable entrantsScuderia Ferrari
FISA
Scuderia Sant Ambroeus
Notable drivers Luigi Musso
Peter Collins
Mike Hawthorn
Wolfgang von Trips
Olivier Gendebien
Phil Hill
Tony Brooks
Debut1958 Argentine Grand Prix
RacesWinsPoles
2557
Constructors' Championships0
Drivers' Championships1

246 F1

The Formula One regulations for 1954–1960 limited naturally aspirated engines to 2500 cc and for the 1958 season there was a change from alcohol fuels to avgas. The 246 F1 used a 2,417.33 cc (2.4 L; 147.5 cu in) Dino V6 engine with a 65° angle between the cylinder banks.[1] The power output was 280 PS (206 kW; 276 hp) at 8500 rpm. This was the first use of a V6 engine in a Formula One car, but otherwise the 246 F1 was a conventional front-engine design. The Ferrari 246 F1 was good enough to win a World Championship for Mike Hawthorn and a second place in the Constructors' Championship for Ferrari.[2]

The Ferrari 246 F1 was not only the first V6-engined car to win a Formula One Grand Prix, the French Grand Prix at Reims in 1958, it was also the last front-engined car to win a Formula One Grand Prix. This occurred at the 1960 Italian Grand Prix at Monza, where the major British teams boycotted the race.[3]

In 1960, the Ferrari 246 designation was also used for the first mid-/rear-engined Ferrari, the 246 P Formula One car (using same Dino V6 engine of 2417 cc), and then again in 1966 for Ferrari's first three-litre era Formula One car.

A 246 F1 in exhibition in Regent Street, in 2016.

256 F1

In 1959, to make a full use of the allowed capacity regulations, Ferrari enlarged the bore of the Dino V6 engine of the 246 F1 car by 1 mm to 86 mm. This allowed the total displacement to rise to 2474.54 cc. The resulting power output was now 295 PS (217 kW; 291 hp) at 8600 rpm. The new car also received disc brakes as standard and a five-speed gearbox. Only Tony Brooks raced this model but he was outpaced by the mid-engined British cars. He still won in the French and German Grands Prix.[4]

Notes
  1. 1958 Ferrari 246 F1 on www.f1technical.net
  2. "Ferrari 246 F1". formula1.ferrari.com. Retrieved 22 September 2019.
  3. 1960 Italian Grand Prix on 8w.forix.com
  4. "Ferrari 256 F1". formula1.ferrari.com. Retrieved 22 September 2019.
gollark: This isn't much of an explanation.
gollark: I saw that but vaguely assumed it was just nonsense of some kind.
gollark: No, mine is.
gollark: I was more putting that in ironically due to the `split_off`, which does allocation, in the loop.
gollark: Funnily enough, LyricLy's issues with the``` // We're using a streaming algorithm to compile it, for high performance // This means we need to define some buffers to fill with data beforehand // This is an important loop, so we make sure to avoid allocations during it // by predefining them here```bit were not ones I actually realized.

References
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.