Butterfly joint

A butterfly joint, also called a bow tie, dovetail key, Dutchman joint, or Nakashima joint, is a type of joint or inlay used to hold two or more pieces of woods together. These types of joints are mainly used for aesthetics. But these types of joints can be used to reinforce cracks in pieces of wood, doors, picture frames, or drawers.[1]

Butterfly joint

A dovetail key resembles two dovetails connected at the narrow part. A negative of the hole is cut out of the board the butterfly will be placed in and the butterfly is then fitted, keeping the joint together. The wood used for the butterfly is usually a contrasting wood, often walnut.

History

Dutchman Joint

The term Dutchman is used when a patch or inlay covers a miss-cut or an imperfect piece of wood. A Dutchman can also cover a knot in the wood. A Dutchman can be wood or metal. The origin of the name is from San Francisco after the gold rush. All types of European craftsmen came to California to earn a living. The term Dutchman is slang given to the woodworking process of inserting patches. The term Dutchman has been found in the literature of John Russell Bartlett in the Dictionary of Americanisms and Edward H. Knight's American Mechanical Dictionary.[2]

Dovetail Key

In 1894, Jacques De Morgan discovered boats at the pyramid complex of Khakaure Senwosret III at Dahshur. Butterfly, or dovetail, joints were recorded as being used. Some archeologists argue that the dovetail joints were not originally fitted for the boats but were a modern replacement. The dovetail joints look to have been set into the faces of the planks to provide strength, after the excavation, so that it would not fall apart during transport. The craftsmanship of the joints was not what had been seen for the rest of the boats, they were also not fixed in place. Any type of force could cause the joint to fall out. There was also no mention of the joints in the original notes by Morgan taken when he first saw the boats. It is unlikely that if they were present, that he would have missed them. There have been reports of traditional Japanese boats using butterfly cramps but these were held in place by shellac.[3]

Modern use

Contemporary decorative dovetail keys are commonly seen in and associated with the work of George Nakashima.[4] George Nakashima, a Japanese-American woodworker, made the butterfly joint famous in the 1950s. He incorporated it into his nature-inspired woodworking pieces. Nakashima's idea was to not change the wood, only enhance its beauty.[5]

Butterfly joints have come to be a popular video on the internet. Many users post videos of themselves cutting, measuring, and inserting butterfly joints into pieces of wood.

How a Butterfly Joint is made

Butterfly joints are often made using a bandsaw. The piece of wood must be cut out, then sanded down to the proper size. The joint is then traced out onto another piece of wood. This piece of wood is what the end project will be made out of. Using a palm router or a chisel, the traced pattern is cut out of the wood. The joint is placed into the hole and glued down.[6]

Notes
  1. Dalvand, Mosayeb; Ebrahimi, Ghanbar; Haftkhani, Akbar; Maleki, Sadegh (2012-04-25). "Analysis of factors affecting diagonal tension and compression capacity of corner joints in furniture frames fabricated with dovetail key". Journal of Forestry Researc. 24 (1): 155–168. doi:10.1007/s11676-013-0336-y.
  2. Green, Archie (1960). "'Dutchman': An On-the-Job Etymology". American Speech. 35 (4): 270–274. doi:10.2307/453770.
  3. Creasman, Pearce. "A Further Investigation of the Cairo Dahshur Boats": 101–123. Cite journal requires |journal= (help)
  4. Hargreaves, Andrea. "George Nakashima." Woodworkers Institute, 2008. http://www.woodworkersinstitute.com/page.asp?p=624
  5. Rymer, Jeanne; Orden, Sally. "George Nakashima, Master Woodworker: Integrated Philosophy and Process". Journal of Interior Design Education and Research. 17 (2): 35–46. doi:10.1111/j.1939-1668.1991.tb00036.x.
  6. Keller, Seth. "Custom Cut Butterfly Joints". Woodworkers Guild of America.
gollark: Technically, the RFCs act as a standard for the particular behaviour they contain.
gollark: Rewriting in antirust, muahahahahahahahahaħæħæ.
gollark: It should also ship with antivalgrind, which detects unsafe behaviour and makes it much worse.
gollark: Yes. Antirust should make unsafety not just possible and easy but mandatory and maximally unsafe.
gollark: This is unacceptable.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.