Black liquor

In industrial chemistry, black liquor is the by-product from the kraft process when digesting pulpwood into paper pulp removing lignin, hemicelluloses and other extractives from the wood to free the cellulose fibers.[1]

A black liquor sample

The equivalent material in the sulfite process is usually called brown liquor, but the terms red liquor, thick liquor and sulfite liquor are also used.

Composition

Approximately 7 tonnes of black liquor are produced in the manufacture of one tonne of pulp.[2]

The black liquor is an aqueous solution of lignin residues, hemicellulose, and the inorganic chemicals used in the process. The black liquor comprises 15% solids by weight of which two thirds are organic chemicals and the remainder are inorganic.[3] Normally the organics in black liquor are 40-45% soaps, 35-45% lignin and 10-15% other organics.

The organic matter in the black liquor is made up of water/alkali soluble degradation components from the wood.[1] Lignin is degraded to shorter fragments with sulphur content at 1-2% and sodium content at about 6% of the dry solids. Cellulose and hemicellulose is degraded to aliphatic carboxylic acid soaps and hemicellulose fragments. The extractives gives tall oil soap and crude turpentine. The soaps contain about 20% sodium.

The residual lignin components currently serve for hydrolytic or pyrolytic conversion or just burning only. Hemicellulosis may undergo fermentation processes, alternatively.

History

Early kraft pulp mills discharged black liquor to watercourses. Black liquor is quite toxic to aquatic life, and causes a very dark caramel color in the water. The invention of the recovery boiler by G.H. Tomlinson in the early 1930s was a milestone in the advancement of the kraft process.[4]

By 2000, the better kraft mills recovered 99.5% or more of the black liquor, and purified the remainder in biological treatment plants, reducing the environmental effect of the waste waters below the level of scientific significance, except perhaps in very small streams. Even in the 21st century, some small kraft mills remained (producing at most a few tons of pulp per day) that discharged all black liquor. However, these are rapidly disappearing. Some kraft mills, particularly in North America, still recovered under 98% of the black liquor in 2007, which can cause some environmental contamination, even when biologically treated. The general trend is for such obsolete mills to modernize or shut down.

Usage

The black liquor contains more than half of the energy content of the wood fed into the digester of a kraft pulp mill.[5] It is normally concentrated to 65 - 80% by multi-effect evaporators and burned in a recovery boiler to produce energy and recover the cooking chemicals. The viscosity increases as the concentration goes up. At about 50 - 55% solids the salt solubility limit is reached.[6] Tall oil is an important byproduct separated from the black liquor with skimming before it goes to the evaporators or after the first evaporator stage.

Energy source for the pulp mill

Pulp mills have used black liquor as an energy source since at least the 1930s.[7] Most kraft pulp mills use recovery boilers to recover and burn much of the black liquor they produce, generating steam and recovering the cooking chemicals (sodium hydroxide and sodium sulfide used to separate lignin from the cellulose fibres needed for papermaking). This has helped paper mills reduce problems with water emissions, reduce their use of chemicals by recovery and reuse, and become nearly energy self-sufficient by producing, on average, 66 percent of their own electricity needs on-site.

In the United States, paper companies have consumed nearly all of the black liquor they produce since the 1990s.[7] As a result, the forest products industry has become one of the United States' leading generators of carbon-neutral renewable energy, producing approximately 28.5 terawatt hours of electricity annually.

Use as biofuel feedstock

Gasification

Black liquor as used for gasification

New waste-to-energy methods to recover and utilize the energy in the black liquor have been developed. The use of black liquor gasification has the potential to achieve higher overall energy efficiency than the conventional recovery boiler, while generating an energy-rich syngas from the liquor. The syngas can be burnt in a gas turbine combined cycle to produce electricity (usually called BLGCC for Black Liquor Gasification Combined Cycle; similar to IGCC) or converted through catalytic processes into chemicals or fuels such as methanol, dimethyl ether (DME), or F-T diesel (usually called BLGMF for Black Liquor Gasification for Motor Fuels). This gasification technology is currently under operation in a 3 MW pilot plant at Chemrec's[8] test facility in Piteå, Sweden. The DME synthesis step will be added in 2011 in the "BioDME" project, supported by the European Commission's Seventh Framework Programme (FP7) and the Swedish Energy Agency.[9]

Used for biofuels production, the black liquor gasification route has been shown to have very high conversion efficiency and greenhouse gas reduction potential.[10]

Hydrothermal liquefaction

Hydrothermal liquefaction is suitable for converting black liquor to advanced biofuels due to the process's ability to handle high moisture inputs.[11]

Extraction of lignin

Where recovery boiler capacity is limited and a bottleneck in the pulp mill the lignin in the black liquor may be extraordinary and exported or used as fuel in the mill's lime kiln, thereby often replacing fossil based fuel with biofuel.

U.S. tax credit 2007–2010

A tax credit created by the U.S. Congress in 2005 as part of the 2005 Highway Bill to reward and support the use of liquid alternative fuel derived from hydrocarbons in the transportation sector was expanded in 2007 to include non-mobile uses of liquid alternative fuel derived from biomass. This change meant that, in addition to fish processors, animal renderers and meat packers, kraft pulp producers became eligible for the tax credit as a result of their generation and use of black liquor to make energy. For one large company (International Paper) this could amount to as much as $3.7 billion in benefits.[7][12] Weyerhaeuser announced in May 2009 that it was also pursuing the tax credit.[13] While some have criticized the paper industry's eligibility for the alternative fuel mix tax credit on the grounds that it is increasing fossil fuel use, the industry has countered that adding a fossil fuel is actually a requirement of the law and that, regardless, this does not result in a net increase in fossil fuel use since companies are merely replacing the existing fossil fuel they already mix with black liquor—natural gas—with one of the three fuels specified by the law: gasoline, kerosene or diesel. The bio-fuel credit for black liquor ended on January 1, 2010.

gollark: Wait, is 0 1 January 1970 or 0 January 1970? I forgot.
gollark: They defined it that way because round numbers, I guess.
gollark: It's 0 in Unix time.
gollark: Oh, right, you're in a different "time zone" so it's "reasonable" to have classes now.
gollark: I see.

References

  1. Stenius, Per, ed. (2000). "2". Forest Products Chemistry. Papermaking Science and Technology. 3. Helsinki, Finland: Fapet OY. pp. 62–78. ISBN 978-952-5216-03-5.
  2. Biermann, Christopher J. (1993). Essentials of Pulping and Papermaking. San Diego: Academic Press, Inc. ISBN 978-0-12-097360-6.
  3. Handbook of Pulping and Papermaking SE, 1996, ISBN 0-12-097362-6
  4. E. Sjöström (1993). Wood Chemistry: Fundamentals and Applications. Academic Press.
  5. The Center for Paper Business and Industry Studies (CPBIS)
  6. Empie, H. Jeff (2009). Fundamentals of the craft recovery process. USA: Tappi Press. p. 7. ISBN 978-1-59510-186-0.
  7. Mufson, Steven (March 28, 2009). "Papermakers Dig Deep in Highway Bill To Hit Gold". The Washington Post. Retrieved 2009-06-03.
  8. Chemrec Archived 2010-08-11 at the Wayback Machine website
  9. BioDME Project website
  10. Well-to-Wheels analysis of future automotive fuels and powertrains in the European context Archived 2011-03-04 at the Wayback Machine EUCAR / Concawe /JRC Well-to-Wheels Report Version 2c, March 2007
  11. Kosinkova, Jana; Ramirez, Jerome; Nguyen, Jenny; Ristovski, Zoran; Brown, Richard; Lin, Carol; Rainey, Thomas (10 Sep 2015). "Hydrothermal liquefaction of bagasse using ethanol and black liquor as solvents" (PDF). Biofuels, Bioproducts and Biorefining. 9 (6): 630–638. doi:10.1002/bbb.1578.
  12. "International Paper Provides Update on Alternative Fuel Credits". International Paper. March 24, 2009. Archived from the original on July 14, 2012. Retrieved 2009-06-03.
  13. "Weyerhaeuser says applied to become qualified as alternative fuel mixer". CNBC. May 5, 2009. Retrieved 2009-06-03.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.