Barber-Colman knotter
A Barber-Colman knotter is a piece of textile machinery used in a weaving shed. When all the warp carried on the weavers beam has been used, a new beam replaces it. Each end has to pass through the eyes on the existing heddles, and through the existing reed. The knotter takes each new thread and knots it the existing end, which will pull it through the correct healds and reed, saving much time. A good man could do 32 or 33 warps a day.
A tenter using a Barber-Colman knotter
See also
- Barber-Colman Company
References
- Ashmore, Owen (1982). The industrial archaeology of North-west England. Manchester University Press. ISBN 0-7190-0820-4. Retrieved 2009-06-25.CS1 maint: ref=harv (link)
| Weaves |  | |
|---|---|---|
| Components | ||
| Tools and techniques | ||
| Types of looms | ||
| Weavers |
| |
| Employment practices | ||
| Mills | ||
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.