Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [usb]

Universal Serial Bus, an industry standard for serial communication.

The Universal Serial Bus is an industry standard for serial communication, defining:

  • connectors
  • protocols
  • cables

Originally developed to have a standard for connecting devices to computers.

More info on usb.org and wikipedia.

402 questions
0
votes
1 answer

Are the tty parameters stored somewhere when using screen?

Here is the story: From a fresh install of ubuntu I use a serial to usb device. screen /dev/ttyUSB0 everything goes fine and I can interact with the device perfectly. Then I unplug this device, plug another one (a 3g modem). Again screen…
user1707414
  • 291
  • 1
  • 3
  • 10
0
votes
1 answer

XenServer 7 - Duplicate the USB stick?

I have installed XenServer 7 on an usb stick like it's quite common with Esxi. I used my 64Gb stick thinking it will only use the required space and that I will be able to duplicate it later on a smaller key (with CloneZilla). Problem, it has spawn…
Karnalta
  • 121
  • 6
0
votes
1 answer

Ubuntu Server 16 LTS no usb 2.0

After installation Ubuntu Server 16 LTS, there is no usb 2.0. I can not connect mouse, keyboard, disc, pendrive e.t.c. On usb 3.0 it works. Motherboard - new Gigabyte - GA-970A-DS3P
Mantykora 7
  • 59
  • 1
  • 12
0
votes
2 answers

ESXi USB passthrough not working for Windows 2012R2 guest

A USB device (Feitian HID dongle) is physically attached to a VMWare ESXi host (5.1.0). The USB dongle is configured in passthrough mode for a Windows 2012 R2 (VMWare Level 8) host. The Windows host does not "see" it - it doesn't appear in device…
Konrads
  • 860
  • 2
  • 20
  • 38
0
votes
1 answer

Using an LTE Dongle on a router's USB port

I know there are routers which support LTE/3G dongles (like the FRITZ!box by AVM). But if I have got a router, which officially does not suppport these dongles, but has got USB ports for NAT storage, can it support LTE/3G dongles with the correct…
Benni
  • 103
  • 2
0
votes
1 answer

How to dump usb stick with corrupt partition table?

Question at the bottom. When I insert the 8GB usb stick I get this in dmesg [168699.879019] usb 1-4: new high-speed USB device number 24 using ehci-pci [168699.994177] usb 1-4: New USB device found, idVendor=1f75, idProduct=0917 [168699.994181] usb…
Jasmine Lognnes
  • 2,490
  • 8
  • 31
  • 51
0
votes
2 answers

How to install USB-to-Ethernet Adapter on Windows Server 2012

I am having problems installing a USB-to-Ethernet (model HB-T66) on my HP ProLiant ML310e Gen8 v2 server (Intel Xeon) running Windows Server 2012 R2 Standard. In Device Manager, the device appears at "Other Devices" as "USB 2.0 10/100M Ethernet…
Jonas
  • 151
  • 2
  • 6
0
votes
0 answers

Poor transfer rate on Windows Server 2012 R2 on USB3 External HDD

I've upgraded from Windows Server 2008 R2 to Windows Server 2012 R2 on a physical server built on a 2011' Asus motherboard. Windows 2008 was known to not support USB3, and that was an issue since years because we frequently need to transfer large…
Sierramike
  • 163
  • 1
  • 3
  • 12
0
votes
1 answer

how to configure logging on using USB token windows server 2008 R2

I have a USB token, and I want clients to use their token to log on to domain, I followed the steps from here a brief definition of what I have done yet: after installing domain and CA-server, I defined a special group, created a special certificate…
komeil sh
  • 1
  • 3
0
votes
2 answers

How to connect a SATA / ESATA / USB 3.0 device over Gigabit Ethernet

I am looking for a way to connect an 5.25 SATA removable drive bay from CRU to our HP Proliant 360 blade server. Unfortunately the server has no support for USB 3.0 and no free PCI slot to upgrade USB 3.0 functionality. Also it doesn't have an eSATA…
Mike
  • 9
  • 1
  • 2
0
votes
1 answer

gnokii sometimes Initialization failed

I have problem with gnokii 0.6.31 +usb huawei e220 (centos 6.4 64 bit) Normaly works ok. echo "SMS from Huawei" | gnokii --phone huawei --config /etc/gnokiirc --sendsms 1234567890 GNOKII Version 0.6.31 Send succeeded with reference -1! But after a…
Asker1234
  • 1
  • 2
0
votes
2 answers

Auto mount usb keys on a static point?

I want to create a script to backup data for casuals. They have to insert a usb key and just have to click on a script to backup data on it. Unfortunately, in Centos 6.6 auto mount change the mount point everytime, depending of the name of the usb…
Lucas tillier
  • 41
  • 4
0
votes
3 answers

"Access is denied" trying to bring VM-attached USB hard disk back online in Disk Manager

Windows Server 2012 R2 Hyper-V with CentOS 6.5 and CentOS 7 VMs. In Disk Manager, I right-click my USB hard drive and pick Offline. In Hyper-V Manager, I right-click either CentOS VM, and I connect the physical disk to either of the VMs as a SCSI…
Kev
  • 964
  • 4
  • 23
  • 46
0
votes
2 answers

HP Proliant ML110 POST fails with large (4GB) USB Disk attached

I have a HP Proliant ML110 G5 (tower) which fails to boot whenever a large disk (4TB) is attached via USB. The machine displays the HP logo for a very long time (the POST on these machines is long anyway, but in this instance it can be 5 mins or…
questions
  • 45
  • 1
  • 8
0
votes
2 answers

Installing Windows 7 RC on Mac OS X

Is it possible to use the Bootcamp Assistant to install Windows 7 RC on Mac OS X? Also, how do I install/boot from usb after copying the iso to the usb harddrive??
codingbear
  • 221
  • 1
  • 3
  • 8
1 2 3
…
26 27