Questions tagged [tp-link]
31 questions
3
votes
2 answers
Access computer on LAN behind OpenVPN server
I have a TP-Link VR400 Archer router on which I want to enable the OpenVPN server, so that a remote user can connect to the network and access a specific computer on the internal LAN. The router has an address of 192.168.0.99, subnet mask…
John Moore
- 171
- 1
- 6
2
votes
1 answer
broadcast ping from wlan client - just 2 other clients respond?
The question came up when trying to integrate my KNX-IP interface via the java Calimero library. My implementation (running on the Raspberry - via WLAN) did not find the KNX IP interface, so I started deeper investigation.
Meanwhile I disabled…
Christoph Bimminger
- 121
- 3
2
votes
0 answers
Router TP-Link TL-WDR4300 not Forwarding ports
Although I configured the forwarding ports in my router they are closed.
I have a TP-Link TL-WDR4300 router connected to my home network. I also have a TP-Link TL-WA850RE repeater working as a Wi-Fi extender.
Logged into the WDR4300
Navigated to…
Maramal
- 121
- 2
2
votes
2 answers
Remote Management only via VPN on a TL-ER6020
We have a TL-ER6020 which we are setting up in a "Non NAT" mode (the WAN side is on a /30 network and routes a /29 network).
I want to be able to "Remote Manage" the router, but want to prevent it from being accessible over HTTP from the WAN…
kidoman
- 41
- 5
1
vote
0 answers
Bind WAN to TD-W8960N
I have a TD-W8960N DSL modem. It is possible to have multiple WAN services on the device as in
Both of them are doing great as in Diagnostic
How is it possible to bind two different computer to each of them ? (The result should gave two different…
M at
- 111
- 3
1
vote
1 answer
Looking to mimic Netgear Nighthawk AC1900 Router Settings in a TP-Link MR3040 Router
I have a Netgear Nighthawk AC1900 Router that is setup and working correctly with a network that has two Wifi cameras and a Linux PC acting as a server.
Static IP addresses have been assigned to both WiFi cameras and the Linux PC in the Netgear…
Brian
- 311
- 3
- 4
- 14
1
vote
0 answers
Why don't TP-Link 24x-switches propagate clients when cascaded in two?
I'm behind two TP-Link switches those are cascaded behind a TP-Link router, which is in turn behind a consumer router that works as in modem only mode.
Clients connected to the first switch work properly, also everything at other switches directly…
Melchior Blausand
- 127
- 4
1
vote
1 answer
Configuring 3 VLAN with different IP ranges?
I bought TP-Link T2500G-10TS L2 switch. My intention is to establish 3 VLANs.
Company A - IP range starts from 192.168.1.1 to 255
Company B - IP range starts from 192.168.2.1 to 255
Guest - IP range starts from 10.0.0.1 to 255 (for Wi-Fi)
This is an…
ONDER
- 11
- 1
1
vote
2 answers
Basic 2 Routers configurations for noobs
So, my goal is to have each one of my devices connected to a double-NAT simple solutions.
I've started my configuration with Router 1:
IP: 192.168.1.254
Mask: 255.255.252.0
DHCP
Ipv4: 192.168.1.10 - 192.168.1.250
Mask: 255.255.252.0
Server:…
Pedro Amorim
- 11
- 1
0
votes
1 answer
Unable to connect to internal network through VPN
I am using two routers, one for connecting through VPN, and the other for internal network. My issue is after I connect via VPN, I can't access the internal network in other router. Here's my setup:
DrayTek Vigor 2832n
Used to connect to outside…
abuhun
- 11
- 2
0
votes
1 answer
Site to Site VPN devices behind ISP modem
site to site vpn setup when behind isp wifi router image
I've read through many site to site vpn posts on this site but I still haven't found a solution to my issue. Here is the situation. I was asked to connect two sites together so the remote…
Binxalot
- 1
- 2
0
votes
2 answers
Communicating between VLANS without routing - 802.1Q
I have a NVR which I can access on my LAN, I would like some IP cameras isolated on a VLAN to access the NVR using a 802.1Q managed switch only.
I want the cameras to connect to the NVR without wasting router resources, can I do this through a…
Bringle
- 1
- 1
0
votes
0 answers
Router (TP-Link MR200) with dynamic IP behind NAT failing to create IPSEC VPN to Ubuntu Strongswan
I've been trying to get this up and running and I got it further than I expected but am getting stuck at an error received INVALID_ID_INFORMATION error notify and there's a very peculiar local IP that shows in strongswan's logs, which isn't on the…
Normadize
- 141
- 1
- 7
0
votes
0 answers
Cisco AnyConnect VPN Disconnects Internet with TP Link router
I use a TP Link Archer C20 Wirelss Dual Band Router to connect to fiber broadband service.
For my office work, I connect to a VPN network, which works fine for sometime. And after a while, the VPN breaks the internet connection. None of the router…
omeganebula
- 21
- 3
0
votes
1 answer
Router Wi-Fi not working after power failure
I know this sounds lame, but it's the second consumer router in as many months which has Wi-Fi issues after power failures. My electric utility company sent notices this morning that they were working on the power grid, and that we'll have outages…
Bogdan Stăncescu
- 111
- 2