Stafford Common railway station

Stafford Common railway station was a former British railway station on the outskirts of Stafford.

Stafford Common
Stafford Common station site, in 2017
Location
PlaceStafford
AreaBorough of Stafford
Coordinates52.8214°N 2.1169°W / 52.8214; -2.1169
Grid referenceSJ922248
Operations
Original companyStafford and Uttoxeter Railway
Pre-groupingGreat Northern Railway
Post-groupingLondon and North Eastern Railway
Platforms2
History
1874Station opened
1882resited
4 December 1939Station closed
Disused railway stations in the United Kingdom
Closed railway stations in Britain
A B C D–F G H–J K–L M–O P–R S T–V W–Z

It was opened by the Stafford and Uttoxeter Railway in 1874 about seven years after the line opened. There was a single platform with a stationmaster's office and waiting room, but it included a goods yard and an engine shed. It became the headquarters of the line, to reduce dependence on the LNWR at Stafford station.

The Stafford and Uttoxeter Railway was purchased for £100,000 by the Great Northern Railway in July 1881 and the line subsequently passed into LNER ownership with Railway Grouping in 1923.

The original station was to the southwest of the Marston Road bridge (now Common Road). When the GNR doubled the line, the station was rebuilt on the other side of the bridge and bordering on Aston Terrace. It had two platforms and opened in 1882.[1] The station buildings were on the bridge, timber throughout, with covered steps to the platforms where there were small shelters.

Passenger services finished in 1939, though it remained open as Stafford Common Air Ministry Sidings until 1952. Both of the station's platforms remain in situ, albeit under vegetation, and the line through the station has been converted into a public footpath.

From there the line climbed steeply at 1 in 70 before falling at 1 in 75 to Salt and Sandon.

Route

Preceding station   Disused railways   Following station
Line closed, station open
Great Northern Railway
Line and station closed
gollark: I guess I could make the thing which needs the images poll a channel from the other thread and put them in a table then, but that seems terrible.
gollark: I have another problem. I need to offload the generation of the image things to another thread, since it's quite slow. It seems that just passing a tableref to `createThread` and having it update that doesn't work, since the table is presumably copied at some point. I looked at channels, but they don't look like they work well with async. What's the best way to do this?
gollark: * the seq
gollark: * isn't necessarily free of nulls, or null-terminated
gollark: I was worried because of the fact that they're apparently null-terminated, and my string isn't necessarily.

References

  1. Jones P (1981). The Stafford and Uttoxeter Railway. Salisbury: The Oakwood Press.

Further reading

  • Mitchell, Vic; Smith, Keith (2016). Derby to Stoke-on-Trent. West Sussex: Middleton Press. figs. 91-93. ISBN 9781908174932. OCLC 954271104.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.