Spritsail (square-rigged)

On large sailing ships a spritsail is a square-rigged sail carried on a yard below the bowsprit.[1][2] One of the earliest depictions of a spritsail is carved on Borobudur ship carving in Borobudur temple, Indonesia.

This article is about sails carried on the bowsprit. For fore-and-aft main sails on smaller vessels, see Spritsail.
A replica of the Batavia flying a spritsail (lower right) and a sprit-topsail

In some languages (such as German) it is known as a "blind" (German, (eine) Blinde) because it effectively blocks forward vision when set.[3]

Spritsails were commonly used on sailing vessels from the first carracks until about 1800. Until the mid-18th century, most ships also flew a sprit-topsail from the short sprit topmast that rose vertically above the fore end of the bowsprit.

The full-rigged ships of the golden age of sail had no spritsails, as the area under the bowsprit was instead occupied by rigging (martingales and dolphin striker) that reinforced the bowsprit and jib-boom against the forces of an increasing number of jibs.

Notes
  1. Mastini, Frank (1990). Ship Modeling Simplified: tips and techniques for model building from kits. McGraw-Hill. p. 63. ISBN 0-07-155867-5. Retrieved 2011-01-14.
  2. Jamieson, Alexander (1829). A Dictionary of Mechanical Science. Vol. II. London: Henry Fisher, Son & Co. p. 956. Retrieved 2011-01-14.
  3. E. T. Dankwa (1999). "The Development of Square-Rigged Ships". Retrieved 2011-01-14.


gollark: Is that much use otherwise?
gollark: I guess you can tap the slag production part.
gollark: Other outputs? Such as?
gollark: But they didn't actually exist as entities.
gollark: How about if it RENDERED mobs if you were nearby?
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.