Saxon IIIb V

The Saxon Class IIIb was a twin-coupled tender locomotive built for passenger services with the Royal Saxon State Railways.

IIIb V
DR Class 34.79
Number(s)501–518
DR 34 7901–7902
Quantity18
ManufacturerSächsische Maschinenfabrik, Chemnitz
Year(s) of manufacture1889/1892
Retired1923
Axle arrangement1' B n2v
Track gauge1,435 mm (4 ft 8 1⁄2 in)
Length over buffers13,996 mm (45 ft 11.0 in)
Height4,150 mm (13 ft 7 in)
Overall wheelbase4,550 mm (14 ft 11 in) / 4,950 mm (16 ft 3 in)
Empty weight37.2 t
Service weight41.0 t
Adhesive weight27.8 t
Axle load13.9 t
Top speed75 km/h (47 mph)
Driving wheel diameter1,560 mm (5 ft 1 in)
Carrying wheel diameter1,230 mm (4 ft 0 in)
Valve gearAllan
No. of cylinders2
LP cylinder bore420 mm (17 in)
HP cylinder bore650 mm (26 in)
Piston stroke560 mm (22 in)
Boiler Overpressure12 bar
No. of heating tubes180
Heating tube length3,500 mm (11 ft 6 in)
Grate area1.82 m2 (19.6 sq ft)
Radiative heating area8.0 m2 (86 sq ft)
Tube heating area89.0 m2 (958 sq ft)
Evaporative heating area97.02 m2 (1,044.3 sq ft)
Tendersä 3T 9
BrakesSchleifer air brakes
Westinghouse air brakes (refit)

History

Following the success with the compound locomotives of Class VIb V, corresponding locomotives were procured for hauling passenger trains. Based on the design of the Saxon IIIb the Saxon Engineering Works (Sächsische Maschinenfabrik) built a compound engine. In the years 1889 and 1892 a total of 18 units of the IIIb V were built for passenger train duties. Because the engines apparently did not prove themselves, no further orders were placed.

In 1920, the Deutsche Reichsbahn took over some of the locomotives, but only two remaining engines were included in the new numbering scheme in 1924: numbers 34 7901 and 34 7902.

Design features

The locomotives had a boiler made from three shell rings with a semi-circular cover which, in the area of the firebox, was tucked in it between the frame plates. The boiler was fed by two non-sucking injectors.

The steam engine was designed as a twin-cylinder compound engine with interior Allan valve gear. The high-pressure cylinder was placed on the right, the larger, low-pressure cylinder on the left. They drove the second coupled axle.

The driving axles were fixed in the frame, the leading carrying wheels were designed as a Novotny-Klien axle.

The locomotives left the factory equipped with Schleifer compressed air brakes; these only braked the engine, however. Later, all the locomotives were fitted with Westinghouse air brakes. The locomotiven were coupled to tenders of Saxon Class sä 3 T 9.

Literature
    • Näbrich, Fritz; Meyer, Günter; Preuß, Reiner (1983). Lokomotivarchiv Sachsen 1 (in German). Berlin: transpress VEB Verlag für Verkehrswesen.
    • Preuß, Erich; Preuß, Reiner (1991). Sächsische Staatseisenbahnen (in German). Berlin: transpress Verlagsgesellschaft. ISBN 3-344-70700-0.
    gollark: Actually, you only wrote the version to optimize ɑtemporal bee density, I checked.
    gollark: The exact content of my "thoughts" is determined only by an algorithm which optimizes atemporal bee density.
    gollark: It was in fact discovered recently that the well-known isomorphism between your statements and the concept of incorrectness was actually an *auto*morphism.
    gollark: Clowns *have* been known to communicate via high-frequency electromagnetic signalling, so this isn't entirely ridiculous.
    gollark: Become 27 rotating apioforms, Tux1.
    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.