SS Gjøa (1906)

Gjøa was a steam cargo ship built in 1906 by the J. L. Thompson & Sons of Sunderland for Harald Eie of Bergen.

History
Norway
Name: Gjøa
Owner: Harald Eie
Operator: Harald Eie
Builder: J. L. Thompson & Sons, Sunderland
Yard number: 449
Launched: 29 November 1906
Commissioned: January 1907
Homeport: Bergen
Identification:
Fate: Wrecked, 24 February 1907
General characteristics
Type: Cargo Ship
Tonnage:
Length: 346 ft 5 in (105.59 m)
Beam: 50 ft 8 in (15.44 m)
Depth: 22 ft 9 in (6.93 m)
Installed power: 307 Nhp[1]
Propulsion: J. Dickinson & Sons 3-cylinder triple expansion
Speed: 11.0 knots

Design and Construction

The ship was laid down in 1906 at J. L. Thompson & Sons North Sands shipyard in Sunderland. The vessel was launched on 29 November 1906 (yard number 449), and after successful completion of sea trials the ship was delivered to her owner in January 1907.[2]

As built, the ship was 346 feet 5 inches (105.59 m) long (between perpendiculars) and 50 feet 8 inches (15.44 m) abeam, a mean draft of 22 feet 9 inches (6.93 m).[1] Gjøa was assessed at 3,645 GRT, 2,364 NRT and 6,200 DWT.[1] The vessel had a steel hull, and a single 307 nhp triple-expansion steam engine, with cylinders of 24 12-inch (62 cm), 40-inch (100 cm), and 66-inch (170 cm) diameter with a 45-inch (110 cm) stroke, that drove a single screw propeller, and moved the ship at up to 11.0 knots (12.7 mph; 20.4 km/h).[1]

Operational history

After delivery Gjøa was immediately chartered to transport cargo to South America. The ship left Sunderland for her maiden voyage on January 19, 1907 and arrived at Port Talbot on January 23 for loading.[3][4] £40,000 worth of dynamite and coal were loaded onto her here, and the vessel sailed from Port Talbot on February 7 for Iquique.[5] The ship called at Madeira on February 17 and continued on to her destination via Cape Verde Islands.[6]

On February 24, 1907 Gjøa ran aground on a reef off the island of Maio.[7] Over the next two weeks all of her cargo of dynamite was discharged and safely stored in Praia, except for 600 tons that had to be jettisoned. By then the ship had water in all her holds, and had her bottom seriously damaged.[8] All attempts to refloat her proved to be unsuccessful, and due to being in an exposed position she eventually broke up and was abandoned in early April.[9]

Notes

  1. Lloyd's Register, Steamships and Motorships. London: Lloyd's Register. 1907–1908.CS1 maint: date format (link)
  2. "Wear Built Ships: Gjoa". Retrieved April 2, 2018.
  3. "Steamships Movements". London Standard. 22 January 1907. p. 3.
  4. "Ankomst og Afgang". Kysten. 28 January 1907. p. 3.
  5. "Steamships Movements". London Standard. 9 February 1907. p. 3.
  6. "Ankomst og Afgang". Kysten. 21 February 1907. p. 3.
  7. "Forlis, Havarier, Etc". Kysten. 25 February 1907. p. 2.
  8. "Disasters and Marine Notes". London Standard. 14 March 1907. p. 11.
  9. ""Gjøa" brukket over". Kysten. 3 April 1907. p. 2.
gollark: Really? Cool.
gollark: Steganography is reword but images.
gollark: Robot parser presumably parses robots.
gollark: Reword is obviously a generalized text steganography system.
gollark: Cadence is an EDA/semiconductor IP vendor.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.